Comprehensive repairs / maintenance works for Central Instritutes Vijayanata Mess Squash Court Trax Sprox Idler Swimming pool Golden Stable Auditorium and Cav Mess etc at AGE B/R II area under GE (N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness as in floors, approns etc laid and bedded in any mortar etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6) jointed and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified non skid ceramic coloured tiles slip shield series of somany or equivalent makes as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium series of size exc 0.06 Sqm and n'exc 0.11 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Digitally printed paver tiles of size 300 mm x 300 mm having thickness of 10 mm as approved by GE with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors over and including screed bed 15mm thick in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge Make : Dura Stone by Somany / Endura by Johnson or equivalent as approved by GE.

Material and labour for Vitrified ceramic tiles double charge/ultra charge ,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE as in floor etc laid over and including roughning existing surface , making good the damaged surface, levelling, and fixing with cement based tile adhesive ( Make FOSROC, DR FIXIT) as per the manufecturer's instructions and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 07 (here-in-before) but on skirting / Dado.

Material and labour for joint free / rectified ceramic coloured tiles VC shield series of make somany or equivalent makes as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 09 (here-in-before) but on skirting / Dado

Material and labour for 16 to 18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing & pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polishing to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for machine cut cudappah stone slab 20-25 mm thick over cement screed base, full round moulding the edge laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M & L for Chequred cement concrete tiles with pigment 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed of 15 mm thickness in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M & L for Glossy finish Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incl sand cushioning 30 mm thick etc complete all as specified and directed by Engineer-in-Charge

M & L for 75 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

M & L for Cement concrete type D-2 (1:4:8) (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and directed by Engineer-in-Charge

M & L for PCC type B0 (1:2:4) (using 12.5 mm graded stone aggregate) as in copings including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed by Engineer-in-Charge

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

M & L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

M & L for cutting channels, grooves or rebates n.exc 10 cm girth, and trimming surface on brick/ stone/ concrete surfaces and making good to facings in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

M & L for filleting in any position in repairs and to any shape in cement and sand mortar (1:4) including all mitres, stops etc exc 25 Sqcm but n.exc 50 Sqcm etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge. Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent in Hindware / Cera / Jaquar

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge.Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 Of Hindware or equivalent in Cera / Jaquar

Supply and fix in repairs wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No 10004 of Hindware or Cat Part No C0475 of Parryware or equivalent in Cera / Jaquar

Supply and fix in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge Make : (i) Model Olympia Satin Finish silent square range of Nirali or equivalent in Dimond / Blue Star (ii) Waste Coupling of make : Plumber / Marc / ESS-ESS

S&F in repair wall mixture, with provn for overhead shower etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No MSH1141 of Marc or equivalent in Plumber / ESS-ESS / Jaquar

Supply & Fix in repair health faucet with 8 mm dia 1 mtr long flexible tube wall mounted/hooked all as per cat Part No 573 of Jaquar or its equivalent in MARC/Plumber / Parryware etc complete all as specified and directed by Engineer-in-Charge

Supply & Fix in repair hand shower of 1mtr long with all connected accessories etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No MSR1200 of Marc or equivalent in Plumber / ESS-ESS / Jaquar

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1020 A(Orintal series) of MARC or equivalent in PLUMBER / ESS-ESS / Jaquar

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320 (Orintal series) of MARC or equivalent in PLUMBER / ESS-ESS / Jaquar

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1010 (Orintal series) of MARC or equivalent in PLUMBER / ESS-ESS / Jaquar

Supply and fix in repairs, shower rose with shower arm of Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) of MARC or equivalent in Make Plumber / ESS-ESS / Jaquar etc complete all as specified and directed by Engineer-in-Charge

S&F in 10 mm thick toughen glass for shelves in corner. Make : Cat part No U0921 of Plumber or equivalent in Marc / ESS-ESS / Jaquar etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No EG-7010 of Plumber or equivalent in Marc / ESS-ESS / Jaquar

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No ER0916 of Plumber or equivalent in Marc / ESS-ESS / Jaquar

S & F in repairs looking mirror of size 600 mm x 450 mm etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C 8610 of Parryware or euivalent in Jaquar / Marc / Ess-Ess

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in Cement and sand mortar (1:4). Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC (1:5:10) type E2 using 40 mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC (1:4:8) type D2 using 40 mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, etc complete all as specified and directed by Engineer-in-Charge Make : Super Thermolay MT of STP / TEXSA India Ltd / IWL Ltd / Tki Tech Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M&L for Filleting in any position and any shape in cement and sand mortar (1:4) including mitered stop etc sectional area of fillets not exc 10 sqcm as in for dado/ skirting top etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild Steel 20 mm dia decorative powder coated curtain rods with fixing brackets fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames of size not exc 1.5 Sqm each but with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames of size exc 1.5 Sqm but n exc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutter exceeding of size 1.00 sqm but not exc 2.00 sqm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engineer-in-Charge

Material and labour for filling in door frames in plain cement concrete (1:2:4) type B0, using 12.5 mm graded stone aggregates etc complete all as specified and directed by Engineer-in-Charge

Supply and fix IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including decorative skin 1.00 mm thick etc complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.

Supply and fix PVC door frame made out of PVC section 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2 mm Plain colour PVC Sheet on back face etc complete all as specified and directed by Engineer-in-Charge

Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge

Supply and fix galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel butt hinges medium weight cold rolled of size 100 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Parliament hinges, cast brass, bright polished and fixed 150 mm width of recess between flanges (when open) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 200 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 150 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe (outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 67 (here-in-before) but 1000 ltrs.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for applying one coat of synthetic enamel paint on old wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old steel surfaces and applying a coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm. etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

Material and labour for figured glass, pin headed 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing Old/New plastered surfaces and applying two coats of oil bound distemper on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing Old/New plastered surfaces and applying two coats of oil bound distemper on ceiling including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing New plasterd surfaces and applying two coats of cement paint on walls etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing Old plasterd surfaces and applying one coat of cement based paint on walls etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing old surface of ceiling and applying one coat of OBD as on ceiling etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing Old surfaces and applying 3 mm thick wall care putty as on wall/ceiling etc complete all as specified and directed by Engineer-in-Charge

S & F powder coated aluminium door shutters with frame in two panels made of section 47.5 x 44.45 x 2.25 mm @ 1.12 Kg/RM frame, vertical styles of section 47 x 44.5 x 2.75 mm thick @ 1.15 kg per RM, top rail & lock rail of section 47.5 x 44.5 x 2.75 mm @ 1.33 kg per RM, bottom rail made of section 114.6 x 44.45 x 2.3 mm @ 2.06 kg per RM with securing rebate @ 0.102 kg per RM with & incl 5 mm thick plain sheet glass incl necessary screw, jointing cleats, glazing clips, rubber packing, aluminium snap beeding etc complete all as specified and directed by Engineer-in-Charge

S & F powder coated aluminium three track window made out of Jindal aluminium sections Nos 20669, 20690, 20668 & 20670 including 5 mm thick plain sheet glass including rubber/neoprene beading and locking arrangement etc complete all as specified and directed by Engineer-in-Charge

S & F powder coated aluminium two track window made out of Jindal aluminium sections Nos 20669, 20690, 20668 & 20670 including 5 mm thick plain sheet glass including rubber/neoprene beading and locking arrangement etc complete all as specified and directed by Engineer-in-Charge

S & F powder coated aluminium frame for fixing doors, windows, ventilaters with one or more rebate with suitable size of screws etc complete all as specified and directed by Engineer-in-Charge

Material and labour for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification and etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs POP suspended ceiling using appropriate size tiles ( 10 mm thick ) support members using GI section of 26 gauge suspended by GIO holder from the slab/ beam in line and level as per design as approved finishing, cleaning and filleting side with suitable moulding, cleaning the site including taking existing etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs insulated PVC wall, lining of 25 mm thickness consisting of pvc insulated panel with wood grain printed PVC sheet used instead of plain colour sheet including taking down/ out of existing wall panneling etc complete all as specified and directed by Engineer-in-Charge

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Engineer-in-Charge Make :- Sleek essence series Of Hindware or Cat part No E8303 Of Parryware or equivalent in Cera / Jaquar

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600 mm etc complete all as specified and directed by Engineer-in-Charge

S & F of rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 (Gde-E- 250) quality-A etc complete all as specified and directed by Engineer-in-Charge

M & L for Taking up or down steel tubing 15 mm bore of pipes and connections etc complete all as specified and directed by Engineer-in-Charge

M & L for Taking up or down steel tubing 20 mm bore of pipes and connections etc complete all as specified and directed by Engineer-in-Charge

M & L for 16 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge

M & L for 20 mm outer dia of Pipe 3 Layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN - 16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old surfaces of wood of any description exc 10cm width/girth incl cleaning and applying one or more coat of french polish etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old decorated surfaces of any description and applying two coats of luster paint of desired shade with roller finish including cleaning etc complete all as specified and directed by Engineer-in-Charge

M&L for aplying one coat of 'Tile guard' of approved shade over any type of roof surfaces including preparation surface and at any height including scaffholding and safety measures etc complete all as specified and directed by Engineer-in-charge. Make : Asian paint or equivalent in Nerolac/ Berger

M&L for aplying one coat of 'Floor guard' of approved shade over any type on concrete/tile surfaces in floor/kerb stone including preparation etc complete all as specified and directed by Engineer-in-charge. Make : Asian paint or equivalent in Nerolac/ Berger

Supply and fixing in repairs PVC (SWR) pipe 110/100mm bore single socketed in any length with rubber ring fixed to wall/laid in trenches or in floors with approved solvent/adhesive including neceassry stack clamps etc complete all as specified and directed by Engineer-in-Charge

All as per srl item No 100 (here-in-before) but 75 mm bore

Supply and fixing in repair PVC (SWR) bends any radius, for 110/100 mm bore of pipe fixed with approved solvent/adhesive fixed to walls or in floors etc complete all as specified and directed by Engineer-in-Charge

All as per srl item No 102 (here-in-before) but 75 mm bore

Supply and fixing in repair PVC (SWR) 110mm bore 'T' equal or unequal etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing PVC Mirror Cabinet. Make : Cat part No 555 of Prayag or equivalent in polytuff etc complete all as specified and directed by Engineer-in-Charge

M & L for Second class hardwood of sectional area Exc 5 Sqcm & n.exc 15 Sqcm clean sawn at 25 cm centres as in battens for roof tiles etc complete all as specified and directed by Engineer-in-Charge

M & L for Roof tiles, Mangolare pattern, interlocking at side joints, laid dry in repair etc complete all as specified and directed by Engineer-in-Charge

M & L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles as in repair bedded and jointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

S & F in repair 100 mm dia CP grating etc complete all as specified and directed by Engineer-in-Charge

S & F in 12 mm thick toughned glass for doors, sheets in corner etc including floor spring, door lock with othe connecting items etc complete all as specified and directed by Engineer-in-Charge

M & L for providing water proofing treatment on roofs, as per manufacturere's instructions and as specified after taking down/out as existing out at site etc complete all as specified and directed by Engineer-in-Charge

(a) Cleaning the newly plasterd surfaces with wire brushes and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface.

(b) Applying and laying torch APP polymer modifiedbituminous membrance 3mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by therofusion process as per manufacturers specification including applying one coat of aluminium paint Make : Super Thermolay of STP or equivalent in TEXSA India Ltd / IWL Ltd / Tiki Tech

Material and labour for plastering 10 mm in cement and sand mortar (1:3) using 100 % course sand on roof mied with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement.

S & F in repairs stainless steel vertical pipe having dia 40 mm of length 77 cm and having dia of 12 mm of balance 10 cm length with bottom base for fixing in floor having 12 mm thickness of pipe etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs stainless steel pipe 50 mm dia and 2 mm thick with the arrangement of fixing with the vertical stainless steel pipe bracket etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs stainless steel pipe 12 mm dia and 2 mm thick with the arrangement of fixing with the vertical stainless steel pipe bracket etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 89,715.00 shall be deducted from BOQ on account of schedule of credit

M/s AG PATHAN

Ms. M.D. Auty

OM SAI ASSOCIATES

M/s. N D Karande

R. T. Saluji