REPLACEMENT OF EXISTING IPS BATTERY BANK ON CODAL LIFE CUM CONDITION BASIS OVER CHENNAI DIVISION

Supply of VRLA Battery Analyzer FLUKE-BT510 or better make (as per spec attached) (Inspection By RITES)

Supply of Set of Torque wrench ratchet type, a) 1/2 inch square drive Kgfm 1-6 & 10- 60NM. b) 1/2 inch square drive Kgfm 2-12 & 20-120NM. c) 1/2 inch square drive Kgfm 4-22 & 40- 220NM. as per Spe. attached. Make- Taparia, Everest , Jhalani or better. (Inspection By Consignee)

Item Breakup - A-SOR 2022 ITEMS

1408204.80 120Ah - 1 Cell as per RDSO Specifications IRS S: 93/96 with Amnd 1 or latest CHENNAI DIVISION-S AND T/SOUTHERN RLY

12713625.60 200Ah - 1 cell as per RDSO Specifications IRS S: 93/96 with Amnd 1 or latest

4683000.00 300Ah - 1 cell as per RDSO Specifications IRS S: 93/96 with Amnd 1 or latest

5068800.00 t h e f o l l o w i n g c a p a c i t i e s w i t h necessary i n s p e c t i o n a s p e r specificatio n/ drawing/ description enclosed in this document.d)Supply of Secondary cells - 2V-200AH capacity

13786560.00 t h e f o l l o w i n g c a p a c i t i e s w i t h necessary i n s p e c t i o n a s p e r specificatio n/ drawing/ description enclosed in this document. e) Supply of Secondary cells - 2V-300AH capacity

216.00 1562.33 b a t t e r y s t a n d i n t h e b a t t e r y r o o m using M.S.Angles 65mmx65mmx8mm and MS flats

hardwood reapers, and installation of secondary cells. The work involves charging of secondary cells, fixing and connecting the batteries with strips, manufacture and fixing of teakwood terminal box, termination of cables, wiring with suitable w i r e PVC 7/1.40mm a n d 3/0.75mm c o p p e r through suitable PVC pipes/ casing properly clamped, provision o f battery particulars board made of phynolic sheet 6mm thick of size 900mm x 1200mm with Aluminium grooved channel frame i n t h e relay room. The particulars shall b e digitally using good quality laminated gum sheet, provision of hydrometer -1 No. on a stand and battery tester-1 No. Charging o f secondary cells shall b e d o n e b y the contractor through reputed agencies.(Supply of secondary cells is not covered in this schedule). a) Provision of battery stand and installation of 2V-300AH cell(Per Unit = Per Cell)

108.00 1354.20 b a t t e r y s t a n d i n t h e b a t t e r y r o o m using M.S.Angles 65mmx65mmx8mm and MS flats

hardwood reapers, and installation of secondary cells. The work involves charging of secondary cells, fixing and connecting the batteries with strips, manufacture and fixing of teakwood terminal box, termination of cables, wiring with suitable w i r e PVC 7/1.40mm a n d 3/0.75mm c o p p e r through suitable PVC pipes/ casing properly clamped, provision o f battery particulars board made of phynolic sheet 6mm thick of size 900mm x 1200mm with Aluminium grooved channel frame i n t h e relay room. The particulars shall b e digitally using good quality laminated gum sheet, provision of hydrometer -1 No. on a stand and battery tester-1 No. Charging o f secondary cells shall b e d o n e b y the contractor through reputed agencies.(Supply of secondary cells is not covered in this schedule). b)Provision of battery stand and installation of 2V-200AH cell(Per Unit = Per Cell) CHENNAI DIVISION-S AND T/SOUTHERN RLY

1318896.72 t h e following capacities, o n existing battery stand/ RCC slabs in the battery room. The work involves charging of secondary cells, fixing and c o n n e c t i n g the batteries with strips, manufacture and fixing of teakwood terminal box, termination of cables, wiring with suitable w i r e PVC 7/1.40mm a n d 3/0.75mm copper through suitable PVC pipes/ casing properly clamped, provision o f battery particulars board made of phynolic sheet 6mm thick of size 900mm x 1200mm with Aluminium grooved channel frame in the relay room. The particulars shall b e digitally using good quality "laminated gum sheet, provision of hydrometer -1 No. o n a s t a n d a n d battery tester-1 N o . Charging of secondary cells shall be done b y the contractor through reputed agencies.(Supply of secondary cells is not covered in this schedule). [Teakwood plank 25mm thick for manufacturing termination box with locking facility, wire PVC 7/1.4mm and 3/0.75mm copper, anti-corrosive paint, varnish, PVC pipes/ casing, a n d a l l other miscellaneous materials required for this work shall be supplied by the contractor]." a) Installation o f 2V-300AH cell on existing stand / slabs(Per Unit = Per Cell)

612.00 t h e following capacities, o n existing battery stand/ RCC slabs in the battery room. The work involves charging of secondary cells, fixing and c o n n e c t i n g the batteries with strips, manufacture and fixing of teakwood terminal box, termination of cables, wiring with suitable w i r e PVC 7/1.40mm a n d 3/0.75mm copper through suitable PVC pipes/ casing properly clamped, provision o f battery particulars board made of phynolic sheet 6mm thick of size 900mm x 1200mm with Aluminium grooved channel frame in the relay room. The particulars shall b e digitally using good quality "laminated gum sheet, provision of hydrometer -1 No. o n a s t a n d a n d battery tester-1 N o . Charging of secondary cells shall be done b y the contractor through reputed agencies.(Supply of secondary cells is not covered in this schedule). [Teakwood plank 25mm thick for manufacturing termination box with locking facility, wire PVC 7/1.4mm and 3/0.75mm copper, anti-corrosive paint, varnish, PVC pipes/ casing, a n d a l l other miscellaneous materials required for this work shall be supplied by the contractor]." b)Installation o f 2V-200AH cell on existing stand/ slabs(Per Unit = Per Cell)

296.00 gears by deputation of Helpers/Unskilled Labour Days f o r executing additional S & T portio n o f the works. The work can involve fixing, releasing, dismantling, replacement,excavation, clearing of vegetation, loading and unloadingof material and assisting skilled persons etc as per instruction of Railway representative. CHENNAI DIVISION-S AND T/SOUTHERN RLY

148.00 1073.45 g e a r sb y d e p u t a t i o n of Days Fitter/Wireman/Painter/Welder/ Mason/Cable Jointer (Skilled Labour or Technician ) etc., for executing additional S&T portion of works. The work can involve fixing, releasing, dismantling, replacement, painting or alteration o f various signallilng assets or parts, termination of cables, minor patch work on damages at location box, Plastering, Concreting b r i c k w o r k , wiring alterations, cable jointing etc a s per instruction of Railway representatives at size.

1000.00 per the instructions of Railway representative at s i t e . T h e w o r k also includes l o a d i n g and unloading o f the materials a)Transportation of Signalling materials upto 100kms