REPAIR TO ROADS, CENTRE LINE MARKING, ROAD SIDE FURNITURE AND ALLIED WORK SERVICES IN TECH AREA, DOMESTIC AREA AND CQAE (WE) AREA UNDER AF STN YELHANKA

Amount

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a priming / tack coat with bituminous primer (VG-10) @ 05 Kg per 10 Square metre providing bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder (bitumen VG-30) content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne roller complete all as specified and directed. (Note : Mixing to be carried out at Hot mixing plant and laid by Mechanical paver)

Repair to pot holes of any depth, not exc 1.00 Sqm each sweeping free from dust and mud or water scoring sunken surfaces in roads paths etc cutting around edges to at least 25mm in depth and making good by applying tack coat at the rate of 5 Kg/10 Sqm, putting premixed carpet , rolled / rammed and sealed with premixed sand seal coat(6.80kg of binder with 0.06 cum of sand) and again well rammed to true surface (including supply of premixed macadam binder and chipping) depth of pot holes not exc 30 mm using paving bituminous complete all as specified and directed.

M&L preparation of road surfaces and applying refective themoplastic road marking paint (White or golden Yellow) of minimum 2.50 mm thick (conforming to BIS-3262), single coat as in centre line and edge line road marking of 150/100 mm width using ' HOT MARK' by indigenous modern propelled road marking machine as directed including all ingredients such as binder , glass beads , titanium dioxide , cacium carbonate , inter filler as specified in table 803.4 of MORTH specification , thermoplastic required for glass beads shall be as spd in (intermix) type-I , MOST/BS 6088A and road marking shall done as per provisions contained in IRC -35-1997 , complete all as specified and directed by E-In-C

S&F in repair road solar stud made of aluminium alloy and contruction, size 125x125x25mm, solar powered by monocrystal solar panel, having one high capacity Ni-Cd rechargeable battery for power back upto 12 hrs and 3 Hrs and 3 Nos LEDs -010mm each side total 06 nos , viever distance 1000 mtrs , fixing with nail/screws/fastener / polymer adhesive / epoxy bond to the surfaces , after preparation and making even surfaces , (Make :- Dark eye, Green lite or equivalent)

Miling of existing DAC surface with asphalt zipper machine to a depth exceeding 30mm and not exceeding 50mm averaging 40mm thick (approx) and disposing the scarified material off the premises. Note : Disposal of retrieved material shall be measured and paid separately.

M&L Premix bituminous (paving bitumen any penetration) macadam laid/rolled and compacted to required gradient and camber with 8 to 12 tonne roller (consolidated) thickness 75mm or less and binder content of 4% by weight of total mix complete all as specified and directed.

Removing scarified material exc 500 m and n exc 1500 m depositing where directed complete all as specified and as directed.

Repairs to pot holes any depth n exc 1.00 sqm each including sweeping free from dust and mud or water,scoring sunken surfaces in roads paths etc. Cutting around edgrs to atlest 25mm in depth , making good by filling in screned and graded road metal. watering and well ramming (including supply of road metal)

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a primer/tack coat with bituminous 5Kg/ 10Sqm using rapid setting bitumen catinonic emulision confirming to IS-8887-2001 completed all as specified and dirceted.

Ditto all as per item No.9 but 8Kg/ 10Sqm

M&L for bituminous premix semi dense asphalitic concrete 40mm consolidated with thickness with pavement bitumen of VG-30 with 5.5% binder contents by weight of total mix . rolled and compacted to required camber and gradient using 8 to 10 ton capacity vibratory power roller laid with mechanical paver all as specified and as directed.

M&L for bituminous premix semi dense asphalitic concrete 40mm consolidated thickness with pavement bitumen of VG-30 with 5.5% binder contents by weight of total mix . rolled and compacted to required camber and gradient using 8 to 10 ton capacity vibratory power roller laid with mechanical paver including used processed palstic content to mix up with binder content during hot mixing all as specified and as directed. (processed plastic content shall be measured speerately)

Supply only processed plastic content to mix up with binder content during hot mixing. Make KK Plastic Waste management Ltd.

Scarifying or picking gravelled Macadam or bituminous macadam exc surface in area exc 400 sqm, n.exc 50mm deep and removing n exc 50 meters and stacking

M&L for painting 2.5MM THICK thick road marking strips exc 10 cm width or grith for layout of center line, drashes,rows,speed brakers. Writing letter etc, eith thermoplastic roaad marking paint (reflective) of specified shade or colour by using fully automatic thermoplastic paint applicator machine filled with profile shoe, glass beads speser propane tank heater and profile shoe heater over byexpirenced operator on road surface including road marking paint spray machine as in lines,dashes letters,arrows etc complete all as specified amnd directed.

S&F water proof energy savings and ecofriendly solar energy road stud transparent made of unbreakable poly carbonate shell 7 clear facing designed for maintenance & free operation Powered by solar panels any colour with working time 36 to 40 hours after battery if fully charged with brightness senstive auto switch & high visibility HD's of size 125x125x25mm with shank 265 mm . including connecting screws copleted all as specified and as directed. Make Dark Eye (model No.-SKUDA-113) or equivalent in 3M.

S&F repairs for road studs (cat eye) with self two way relection 100x100x20mm (minium) single shank, plastic body or aluminum body. Lighting mode-Reflection, having visual range of 600 to 800mm globe completed make make eye (Model No. SKUDA-113) or equivalent in 3M completed all as specified and as directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45 /50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150X150X300mm) type B1 complete all as specified and directed.

S&F in repasirs for plastic speed bump or speed breakers of size 500X425X75mm made of sturdy plastic, highly resistant to severe impacts and harsh weather conditiond overtail,interlocking submit to make it bend perfectly into one firm bump made for pre coloured materials (Black& Yellow) and UV stabilised to keep intact is colour studded with reflector's on either side to make it clearly visible to mutants during night hours fixed all as per manufacture's instructions complete all as specified and directed Make Dark Eye/3M.

M&L for preparation of old decorated surfaces of walls, border & vertical projections such as cols, chajja, facia beams, Road side Kerb and the like, floor interlocking tiles & chequrred tile cladding etc by scrubbing, washing rubbing down and stopping of painted surfaces and applying one coat of exterior acrylic emulsion anti fungal paint any colour shade complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n. exc 15cm thickness (below or above ground level) all as specified and as directed.

Dismantling floor, earth or wall tilling including cement mortar bedding (but not backing) removing scerviceable tiles to store and rubbish off the premises all as specified and as directed.

Excavation over areas, n exc 1.5m deep and getting out in soft/ loose soil all as specified and as directed.

M&L for hard core of gauge n.exc 63mm deposited,spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface by broken stone or boulders all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations,filling and mass concrete all as specified and as directed.

M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in Path/ hardstanding/ flooring etc finished even & fair of 100mm thick all as specified and as directed.

M&L for machine pressed pre-cast concrete interlocking paver block rubber moulded lacquer finish any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and no pigment all as specified and as directed.

Ditto- all as per item No.27 above built except tiles.

Sand filling under floors or in foundations including watering consolidation sprading and levelling in layers n.exc 25cm thick,well rammimg including watering all as specified and as directed.

Forming 20mm thick expantion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'B' thickness of concrete slab in 100mm all as specified and as directed.

Forming constraction joint 30mm deep x10mm wide filled with sealing compound Grade 'B' all as specified and as directed.

Removing excavated material exc 1.50Km but n.exc 5.00Km and deposit where directed in soil.

Taking down steel Gratings of any description area not exc 1.00 sqm fixed on wall and refixing the same in same opening after raising the level (by means of concrete) for free flow of strom water all as specified and as directed.

MANJUNATHA CONSTRUCTIONS

SMLP ASPHALTS