CONSTRUCTION OF DIVISIONAL SPORTS COMPLEX LATUR, AT KAVHA, DIST. LATUR

ITEM No. 1 :-       Providing, Supplying, fabricating and fixing panel of PERFORATED aluminium composite panel cladding with CNC Cutting, as per Architectural design, approved shape made out of 4 millimetre thick ACP sheet material consisting of 3 millimetre thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 millimetre thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and shade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etcetera overall weight of the ACP shall not be less than 7.5 Kilogram/ One Square Metre)

ITEM No. 2 :-  Providing and fixing 12 millimetre thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etcetera including required door fittings, all complete as per direction of Engineer in charge

ITEM No. 3 :-  Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear Portions of the building for all heights and all levels, including:(a) Structural analysis design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminium sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etcetera gaskets, screws, toggles, nuts, bolts, clamps etcetera , structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including (b) Fabricating and supplying serrated M.S. hot dip galvanised /Aluminium alloy of 6005 TS brackets of required sizes, sections and profiles etcetera to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC / Masonry / Structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etcetera of stainless steel grade 316, of the required capacity and in required numbers.

ITEM No. 4 :-       Providing and positioning bunk bed made out of approved colour, powder coated, M.S. (IS 513:2008) pipe frame and angle supports. Two end frames shall be made out of 16 guage and 40 millimetre diametre M.S. pipes as vertical supports and 16 guage 25 millimetre diametre M.S pipes along with 40 X 40 X 6 millimetre M. S. angle lateral frame to receive 12 millimetre thick marine grade ply base for 100 millimetre thick, 100 density coir mattress etcetera complete. Edges of the base ply shall be sealed with 6 millimetre thick T.W lipping. Two nos of 25 millimetre diametre 16 guage pipe supports shall be provided to support both the base ply and ladder and with necessary Nylon bushers for pipe ends touching to floor and with approved colour powder coating and complete as per the instructions of the Architect or Engineer in charge. Note : This item shall be made in knock down type of arrangement.

ITEM No. 5 :-       Dining Table - 1800 X 1200 X 750 MILLIMETRE Providing and Supplying Modular Dining Table with 25 millimetre thick Top made out of BWR 303 plywood finished with laminate, other edges finished with 2.0 millimetre thick rehau / sidmark / equivalent make edgeband, Understructure - MS CRCA 1.6 millimetre Tubes with Powder coating. Vertical member will be made from 50 X 50 Square tube and 2 vertical horizontal member will be made from 40 X 40 Square tube. Vertical and Horizontal member will be connected using welding. ABS caps and foot with levellor will be provided on the vertical member. Polycarbonate brackets will be provided to fit the work top. Complete as per Architects detailed drawing & design & as directed including accessories, Provision for necessary wire management as directed. Complete with All necessary hardware & Fixture. Note : All Furniture to Be Made Out of Plywood of Greenply / Duro / Kenwood / Indiano / Blueberry / Samrat or Equivalent make All Internal & External Surfaces of Plywood Finished with 1.0 millimetre thick Laminate of merino/ Greenlam or Equivalent. Complete as per detailed Drawing & Instructions Engineer in charge.

ITEM No. 6 :-       Dining Table - 1200 X 1200 X 750 MILLIMETRE - Providing and Supplying Modular Dining Table with 25millimetre thick Top made out of BWR 303 plywood finished with laminate, other edges finished with 2.0 millimetre thick rehau / sidmark / equivalent make edgeband, Understructure - MS Crca 1.6 millimetre Tubes with Powder coating. Vertical member will be made from 50 X 50 Square tube and 2 vertical horizontal member will be made from 40 X 40 Square tube. Vertical and Horizontal member will be connected using welding. ABS caps and foot with levellor will be provided on the vertical member. Polycarbonate brackets will be provided to fit the work top. Complete as per Architects detailed drawing & design & as directed including accessories, Provision for necessary wire management as directed. Complete with All necessary hardware & Fixture. Note : All Furniture to Be Made Out of Plywood of Greenply / Duro / Kenwood / Indiano / Blueberry / Samrat or Equivalent make All Internal & External Surfaces of Plywood Finished with 1.0 millimetre thick Laminate of merino/ Greenlam or Equivalent. Complete as per detailed Drawing & Instructions Engineer in charge.

ITEM No. 7 :- Dining Chair - Providing & Supplying Dining chair in fiber frame structure. color in Orange, Light Blue, Light Green, Red, Black, White. Complete as per Architects detailed drawing & design & as directed including accessories, Provision for necessary wire management as directed. Complete with All necessary hardware & Fixture. Note : All Furniture to Be Made Out of Plywood of Greenply / Duro / Kenwood / Indiano / Blueberry / Samrat or Equivalent make All Internal & External Surfaces of Plywood Finished with 1.0 millimetre thick Laminate of merino/ Greenlam or Equivalent. Complete as per detailed Drawing & Instructions Engineer in charge.