Laying of water supply line through stakmo village to thiksay monastery.under capex.

Earthwork in excavated by mechanicall means Hydraulic excavator in treanches for foundation , drain, pipes, cables etc., including dressing of side and ramming of bottoms lift upto 1.5m, including getting out excavated earth as All kinds of soil.All kind of soil

Ordinary Rock

Hard Rock

earthwork in excavation by manual means in trenches for foundation , drains, pipes, cable etc. including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed with in lead of 50 meters.All kind of soil

Ordinary Rock

Hard Rock

Earthwork in excavated by mechanicall means over areas exceeding 30cm in depth 1.5m in widht as well as10sqm on plan inclding Dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth and disposal of surpluse excavated earth as with leads of 50meter All kind of soil

Ordinary Rock

Hard Rock

Providing ,laying and fitting of HDPE Pipe conforming to IS 984.1995 with latest amendments and coneying to site including loading and unloading at both destinations 20mm

Manufacuting supplying and delivery of DI/DF resilent seated sluice valve of pipe with bdy and bonnet of ductile cast iron of grade GGG-40 Wedge with fully encaptulate EPM rubber

Providing ,supplying and fitting of gum metal gate valve class 1-2 conforming to IS 778/1986 with all necessary fitting required for installation in HDPE PIES 65MM

Filling of available excavated earth excluding rock in trenches,plinth,sides of foundation etc

Providing ,supplying and installing 15mm CP brass tap conforming to IS specification including all specials such as MDPE -to- GI connector ,elbow pipe nipple and an necessary accessories to connect with MDPE /HDPE /GI pipe,complete with labur ,fitting all leds and lifts as directed by engineer -in -charge

Providing and fixing enclosed type watermeter (BULKTYPE ) conforming to IS 233 and tested by municipal board complete with bolts nuts rubber insertion etc.the tail pieces if required will be paid separately )63mm nominal bore

Providing and laying in position stone boulders incl.watering ,dressing and ramming with all carriage ,loading unloading and stacking etc. complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortor 1:3 (1cement :3coarse sand )cost of required centering shuttering complete 1:1/2:3 mix (cement :coarse sand aggregate 20mm )

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size

12 mm cement plaster of mix 1:6 incl.carriage by MT and head load complete job

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approval steel primer

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 upto plinth level with cement mortor 1:6 incl carriage by MT and head load complete job

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform