REPAIR REPLACEMENT OF OLD RUSTED PIPE LINE AND PUMP MOTOR AND ALL CONNECTED ITEMS INCLUDING CLEANING OF OH/UG SUMPS, FILTRATION PLANTS AND ADDING DISINFECTANTS FOR WATER SUPPLY AND TESTING OF WATER ETC AT NAUSHERA OF AGE EM UNDER GE 862 EWS

Amount

Excavation in trenches n exceeding 1.5 m wide and n exc 1.5 m depth for water pipe line in any type of soil, complete all as specified and directed.

Excavation in trenches n exceeding 1.5 m wide and n exc 1.5 m depth for water pipe line in soft/disintegrated rock, complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick (soil), complete all as specified and as directed.

Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

S&F in repair for CI foot valve unit, suitable for 100mm bore conforming to IS-4038 including nuts, bolts and washers etc fixing the same to the suction pipe of the pump set available in the sump at a depth of 10 feet below the ground level, including taking down old unserviceable foot valve, complete all as specified and directed.

All as per srl item No 5 above but 80 mm bore, complete all as specified and directed.

All as per srl item No 5 above but 50 mm bore, complete all as specified and directed.

M&L for 150 mm bore cast iron non return valve, heavy duty with gun metal sheet, both end flanged including making flanged joint, rubber gasket, nuts, bolts and washers ISI marked, class PN- 1.6 conforming to IS-5312 (Part-2)-1986 complete after taking down old unserviceable non-return valve of any type, complete all as specified and directed.

All as per srl item No 8 above but 100 mm bore, complete all as specified and directed.

All as per srl item No 8 above but 80 mm bore, complete all as specified and directed.

M&L in replacement for CI fittings suitable for CI flanged / socket ends pipe 80 to 150mm bore such as bends, (any radius and angle), tapers any type (straight, bend increasing, deceasing or double socket etc) tee piece, single branch 'Y' junction, double branch, cross (all flanged), collers, caps & plus, tail pieces, reducers, mechanical joints etc, complete all as specified and directed.

Supply, laying, jointing and testing GI pipes 150mm bore medium grade with flange ends centrifugally cast, class LA laid in trenches on supports including all required fittings such as bends, tee, socket, flanges etc and connection and taking down old GI pipe, complete all as specified and directed

All as per srl item No 12 above but 100 mm bore, complete all as specified and directed.

All as per srl item No 12 above but 80 mm bore, complete all as specified and directed.

Supply, laying and testing of 15 mm bore steel water tube (medium grade) with screwed and socket joints together with all fittings such as bends, elbows, tees, short pieces, connection, back nuts, diminishing pieces, caps plugs & union etc and fixed to wall, ceilings or laid in floor/ trenches including taking down old unserviceable GI pipes, complete all as specified and directed.

All as per srl item No 15 above but 20 mm bore, complete all as specified and directed.

All as per srl item No 15 above but 25 mm bore, complete all as specified and directed.

All as per srl item No 15 above but 40 mm bore, complete all as specified and directed.

All as per srl item No 15 above but 50 mm bore, complete all as specified and directed.

S&F for 80mm bore CI sluice valve class PN-1.6, heavy duty ISI marked as per (IS-14846- 2000) with flanged ends with 02 Nos of rubber gaskets, nut, bolts and washers alongwith stainless steel spindle and operating wheel complete after taking out old unserviceable sluice valve with fitting etc, complete all as specified and directed.

All as per srl item No 20 above but 100 mm bore, complete all as specified and directed.

All as per srl item No 20 above but 150 mm bore complete all as specified and directed.

S&F nut bolts washers of different sizes, complete all as specified and directed.

M&L in repair for construction of brick masonry new valve pit chamber of size 1200mmx1200mmx1200mm (internal) size, 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate, providing well burnt brick masonry wall of 230 mm thick, built in CM 1:6, 15 mm thick rendering in cement mortar 1:4, finished even and smooth without using extra cement internally and externally and providing 3.15 mm thick MS sheet steel cover fixed on 50mmx50mmx6mm thick angle iron frame, embbeded in PCC coping with locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of 25x4mm flat iron, appplying two coats of synthetic enamel paint of approved shade, over a coat of primer (Red Oxide zinc chrome) to all exposed surface of sheet and making good all disturbed surface complete after dismantling old unserviceable valve chamber, complete all as specified and directed.

Cleaning of valve pit chamber of any size and depth by taking out mud, muddy water, including cleaning of vegetation around the pit covering area 1mtr around the pit and depositing the same at a distance n. exc 20 mtr away from pit including swipping free from all type of dirt including rectifying the leakage of valve of any size by using of appropriate size required packing materials, complete all as specified and directed.

S&F in repair for 15 mm bore gun metal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for galvanised iron pipe, complete all as specified and directed.

S&F in repair for 20 mm bore gun metal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for galvanised iron pipe, complete all as specified and directed.

S&F in repair for 25 mm bore gun metal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for galvanised iron pipe, complete all as specified and directed.

S&F in repair for 40 mm bore gun metal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for galvanised iron pipe, complete all as specified and directed.

S&F in repair for 50 mm bore gun metal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for galvanised iron pipe, complete all as specified and directed.

S&F in replacement for 80mm bore MS flange plain / thread type of suitable for 80mm MS tubing minimum 10mm thick with 08 / 06 drilled holes including suitable size nuts, bolts, washers & packing materials with welding of flange with pipe where required, complete all as specified and directed.

All as per srl item No 31 above but 100 mm bore, complete all as specified and directed.

All as per srl item No 31 above but 150 mm bore, complete all as specified and directed.

Disconnecting the 10 HP to 20 HP centrifugal pump of any make from the motor after disconnection of mechanical tyre coupling, suction/discharge pipe line and unbolting from foundation base plate, loading/unloading the pump to vehicle and transportation of the pump from Naushera E/M installation to workshop as directed by Engineer-in-Charge for repair/replacement/maintenance of unserviceable parts including strip opening and dismantling of pump for repair, with necessary oiling and greassing and again transportation of the pump through vehicle from workshop to Naushera E/M installations after necessary repair/ replacement/maintenance and loading/ unloading the pump and re-coupling the pump with motor on base frame, after checking of the alignment with motor, testing, commissioning complete all as directed by Engr-in-Charge. ( Note : Spare parts of pump will be measured and paid separately under respective items).

S&F of brass impeller suitable for 10 HP to 20 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of neck ring suitable for 10 HP to 20 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of Bush suitable for 10 HP to 20 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of CI keys suitable for 10 HP to 20 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of sleeves suitable for 10 HP to 20 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of stainless steel shaft of suitable for 10 HP to 20 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F in replacement of pulley tyre coupling complete by drilling grinding and stud etc 10 HP to 20 HP capacity pump, complete all as specified and directed by Engr-in-Charge

All as per srl item No-34 here in before but for pump capacity 25 HP to 30 HP.

S&F of cast brass impeller suitable for 25 HP to 30 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of neck ring suitable for 25 HP to 30 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of Bush suitable for 25 HP to 30 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of CI keys suitable for 25 HP to 30 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of sleeves suitable for 25 HP to 30 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of stainless steel shaft of suitable for 25 HP to 30 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of pulley tyre coupling complete by drilling grinding and stud etc 25 HP to 30 HP capacity pump, complete all as specified and directed by Engr-in-Charge

All as per srl item No-34 here in before but for pump capacity 40 HP to 50 HP.

S&F of cast brass impeller suitable for 40 HP to 50 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of neck ring suitable for 40 HP to 50 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of bush suitable for 40 HP to 50 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of CI keys suitable for 40 HP to 50 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of sleeves suitable for 40 HP to 50 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of stainless steel shaft of suitable for etc 40 HP to 50 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F in replacement of pulley tyre coupling complete by drilling grinding and stud etc 40 HP to 50 HP capacity pump, complete all as specified and directed by Engr-in-Charge

All as per srl item No-34 here in before but for pump capacity 60 HP to 100 HP.

S&F of cast brass impeller suitable for 60 HP to 100 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of neck ring suitable for 60 HP to 100 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of bush suitable for 60 HP to 100 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of CI keys suitable for 60 HP to 100 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of sleeves suitable for 60 HP to 100 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of stainless steel shaft of suitable for 60 HP to 100 HP capacity pump, complete all as specified and directed by Engr-in-Charge

S&F of pulley tyre coupling complete by drilling grinding and stud etc 60 HP to 100 HP capacity pump, complete all as specified and directed by Engr-in-Charge

Disconnecting / dismantling of motor from pump sets of 10HP to 20 HP capacity after removing existing electrical connection from control panel from any locations as directed de-coupling the motor from pump set, removing from foundation without damaging foundation and transporation to workshop for carring out rewinding / repairs, re-assembling transporting back, fixing on foundation, re-coupling and making all electrical connections and testing, complete all as specified and directed. Note: Copper winding wire used for rewinding shall be measured and paid seperately. All other items used for rewinding / repair are deemed to be included in the quoted rate.

All as per srl item No 66 above but capacity of motor 25 HP to 30 HP, complete all as specified and directed.

All as per srl item No 66 above but capacity of motor 40 HP to 50 HP, complete all as specified and directed.

All as per srl item No 66 above but capacity of motor 60 HP to 100 HP, complete all as specified and directed.

M&L for rewinding with super enamelled copper winding wire of existing size and gauge including all insulating materials such as insulating paper, sleeves, warnish etc drying the copper winding after varnishing with blower or heater including soldering all internal connection and testing including taking down old unserviceable winding wire, complete all as specified and directed.

M&L for replacement of ball bearing No SKF/NBC-6305 for motor including refixing of nuts, bolts, washer and sleeves etc, complete all as specified and directed.

All as per srl item No-71 here in before but ball bearing No SK/NBCF-6308.

All as per srl item No-71 here in before but ball bearing No SKF/NBC-6309.

All as per srl item No-71 here in before but ball bearing No SKF/NBC-6312.

All as per srl item No-71 here in before but ball bearing No SKF/NBC-6316.

All as per srl item No-71 here in before but ball bearing No SKF/NBC-7311.

All as per srl item No-71 here in before but roller bearing No SKF/NBC-NU-307.

All as per srl item No-71 here in before but roller bearing No SKF/NBC-NU-411.

All as per srl item No-71 here in before but roller bearing No SKF/NBC-NU-308.

Lifting out and lowering of submersible pump set Capacity 03 HP to 20 HP of any make from bore well for carrying out repair in civil workshop including transportation and dismantling/repair of pumpset by taking out old unserviceable parts and lowering the same after repair/replacement and testing complete all as directed. (Note : Spare parts of pump/motor, re-winding wire of new super enamelled coper wire of existing gauge/size/quality will be measured and paid separately under respective items).

M&L for cutting and removing burnt winding of all submersible motor of capacity of 3 HP to 20 HP, rewinding of motor with super enamelled copper winding wire of original gauge and size including insulation etc, complete all as specified and directed.

M&L in repair of submersible pump of any make capacity of 3HP to 20HP inlcuding replacement of neck ring, bush, impeller, coupling for pump and motor, stainless steel sleave for pump shaft any capacity bowl assembly, body bush, ss shaft and all connected items which required, complete all as specified and directed

M&L for cleaning, scrubbing the surface to remove dust and rust of pump motor set and iron base frame inclusive of one primer coat, one under coat and one finishing coat of smoke grey paint to pump set and black paint to iron base frame to the pump set of any capacity in different location any capacity, complete all as specified and directed.

S&F in repair for Onload change over switch of sheet steel enclosure confirming SS Enclosure, front operated 4Pole 415 V, 50 Hz of Capacity 100Amps, complete all as specified and directed.

S&F in repair for Onload change over switch of sheet steel enclosure confirming SS Enclosure, front operated 4Pole 415 V, 50 Hz of Capacity 63Amps, complete all as specified and directed.

S&F in repair for moulded case circuit breakers with fixed thermal magnetic setting. MCCB 3Pole, 160 Amps, 36KA, 415 V, 50 Hz, complete all as specified and directed.

S&F in repair for moulded case circuit breakers with fixed thermal magnetic setting. MCCB 3Pole, 200 Amps, 36KA, 415 V, 50 Hz, complete all as specified and directed.

S&F in replacement glow sign board backlight in box printed on polycarbonated sheet PVC of Size 4.5 x 3x 1/2 feet size with LED light fitting including angle iron frame, complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick burried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m deep below normal ground level connected to and including 32X6mm thick galvanised iron strip by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as specified in electrical plate No 3 of SSR (2009) part-I including 40mm bore GI pipe light grade for protection of earth strip and PCC 1:2:4 type B-1 as in pit, Precast RCC earth pit cover 8 cm thick reinforced with 8mm dia TMT bars @150mmc/c and two handles, excavation and earth work in any type of soil and alternate layers of charcoal, common salt and 20mm bore galvanised medium grade steel tubing for watering with one end fixed with cast iron funnel and wire mesh and testing on completion complete inclulding taking down existing unserviceable earthing all as specified and directed. (Note:-Earth strip and protection pipe upto 7.5mtr is included in the rate quoted)

S&F in repair for DOL starter, AC 3 phase, 415 Volt, 50 Hz with sheet metal enclosure type suitable for 15 HP motor including making connection, complete all as sepcified and directed.

M&L for 10 sqmm, 3 core submersible copper conductor multistranded cable, LT 1100volt grade,water proof lowering with the column pipe into the bore/ well and testing complete after taking down old unserviceable cable, complete all as specified and directed.

Removal of boulder of various sizes from river bed to the place as directed for making channel towards the main suction line, complete all as specified and directed by the Engr-in-Charge.

Taking out existing filter bed media 5.5x 3.65 m i.e old gravel layers of different size of gravel sand etc and depositing same upto 50m distance as directed and washing the wall and bottom internally with clean water mixed with bleaching powder in the ratio of 1.10 one part of bleaching powder and ten part of water, reusing as required qty of filter media items, writing date of cleaning in 80mm wide letters in white colour over a black ground with synthetic enamel paint, complete all as specified and directed.

M&L for cleaning of old gravels from filtration bed of any size and refilling of granules of any size in six layers of different sizes, complete all as specified and directed

M&L for cleaning of semi underground /OH reservoir sump 100000 gallons capacity by dewatering of muddy water removing through diesel pump sets and lifting mud/sludge from the bottom of sump, scraping removing and cleaning of interior surface of the sump, wall and bottom surface without damage of cement portion removing the same upto 50m distance and depositing as directed. After cleaming /removing washing the same with clean water by using pressure spray water at least two times and removing the muddy /dirty water from the bottom of sump and finally washing with clean water mixed with bleaching powder in the ratio of 1:10 ( one part of bleaching powder ten parts of water ) providing two coats of white washing internally and one coat of cement base paint externally writing date of cleaning and capacity of sump in 10cm height, 80mm wide letters in white colour over black back ground with synthetic enamel paint, complete all as specified and directed by Engr-in-charge.(Location :- Naushera Area)

All as per Srl Item No. 95 here-in-before but for 50000 glns.

All as per Srl Item No. 95 here-in-before but for 25000 glns.

All as per Srl Item No. 95 here-in-before but dug well deep of 30000 glns.

All as per Srl Item No. 95 here-in-before but over head tank of 10000 glns.

Repair of calcium hypochlorite based electronic automatic dosing equipment 100 ltr capacity of any type and make complete with dozing tube and solution drum and other accessories required, complete all as specified and directed. Note: (i) Cost of items / parts which are requried for repair / replacement for satisfactory functioning for the plant shall be included in the rate quoted for this item. (ii) Dosing pump to be cleaned twice in a month. (iii) Labour charges for removal of unserviceable parts and fixing of spare items / parts shall be deemed to be included in the rate quoted for this item.

S&F in replacement of microprocessor based electrionic water level indicataor based on 3 wire interfacing system in between OH tank/ UG tank sensor to main water level indicator units showing indication in percent by seven segment LED display in 10 step (10%, 20%, 30%, ........... 100%) having 10 combined sensor for total depth of tank with all fixing/ grouting arrangement suitable for RCC OH tank/ UG tank of 0.5 to 1.5 lakh gallons capacity including dismantling and complete all as specified and directed. Processor based electronic water level indicator shall also comprising of the followig items : Multi level (10 to 100%) indication in three digit with seven segment with bright LED disply. Sensor with suitable fixing arrangement in over haed tank having electronic circuit to transmit the sensing signal of each level to display unit shall be fitted in pump house. Controller/ power unit with sensing volts (6-12 volts) enclosed with sheet metal enslosure/ wooden board and hylum sheet including proper mounting arrangements. PDC insulated multi strauded copper conductor communication cable 2.5 Sqmm, 3 core from LT Panel to controller/ power unit drawn through 20mm dia non metalic PVC conduit medium grade with all accessories including all fixing arrangements. Hooter with ON/OFF switch to alarm the pump operator when tank is full.

S&F in replacement of star delta DOL starter, AC 3 phase, 415 Volt, 50 Hz with sheet metal enclosure type suitable for 60 HP motor including making connection complete all as sepcified and directed.

M&L for repair of soft starter LT panel for 40 HP capacity, containing the following items. A- MCCB 100 Amps having thermal adjustment and magnetic setting with rupturing capacity of 36 KA, 415V, 50 HZ. B- supply, installing and commisioning of soft starter for 40 HP motor . C- Supply & fixing of contractor relays, CT, Timer for suitable rating with on/off tripping indicator light, push button, and multi functioning meter along with all assesories complete showing voltage, amp, PF etc, Complete all as specified and directed.

M&L for repair of soft starter LT panel for 15 HP capacity, containing the following items. A- MCCB 63 Amps having thermal adjustment and magnetic setting with rupturing capacity of 36 KA, 415V, 50 HZ. B- supply, installing and commisioning of soft starter for 40 HP motor . C- Supply & fixing of contractor relays, CT, Timer for suitable rating with on/off tripping indicator light, push button, and multi functioning meter along with all assesories complete showing voltage, amp, PF etc, Complete all as specified and directed.

Supply and adding to water as per requirement for Alum ferric Gr-IV as per IS-299 :2012 suitable for treatment of drinking water complete all as specified and directed by Engr-in-charge.

Supply and adding to water as per requirement for Calcium Hypo chlorite granular disinfectant chlorine suitable for treatment of drinking water in 45 Kg HDEP container in factory sealed having chlorine content level 70% complete all as specified and directed.

Supply and adding to water as per requirement for stable bleaching powder containing 15% of chlorine gas ISI maked Gde-I confirming to IS-1065/ISO-9001 CM/L-1650852 in 25Kg packing in HDPE bags complete all as specified and directed.

Supply only chlorine test kit including one bottle each of orthotolidine test solution re-usable test vial storage case all as specified and directed.

M&L for water testing of bore well/dug well and test to be carried out as per IS parameters of drinking water (chemical and beactrological test) from Govt approved labortary as per directed by Engr-in-Charge and report to be submitted to GE 862 EWS for record. Physico-chemical parameters as per the ground water standards IS 10500-2012 colour, odour, taste, turbidity, PH, total dissolved solids, total Hardness (as CaCO3), calcium (as Ca), Magnesium (as Mg, Chloride (as CI), Sulphate (as So4), Iron (as Fe), residual free chlorine (as CI2), Copper (as Cu), Manganess (as Mn), Nitrate (as NO3), Fluoride (as F), Phenolic Compound (as C6H5OH), Mercury (as Hg), Cadmium (as Cd), Selenium (as Se, Arsenic (as As), Cyanide (as CN), lead (as Pb), Zinc (as Zn), Annionic Detergents (as MBAS), Total Alkalinity (as CaCO3), Aluminium (as AI), Boron (as B), mineral oil, Barium (as Ba), Chloramines (as CI2), Silver (as Ag), Sulphide (as H2S), Molybdenum (as MO), Nickel (as Ni), Total Chromium (as Cr), Ammonia (as Total ammonia-N, E Coil, Total Coliforms, Polynuclear Aromatic Hydrocarbons (as PAH), Polychlorinated Biphenyls, Pesticides, Alachlor, atrazine, Aldrin, Dieldrin, Alpha HCH, Beta HCH, Gamma-HCH (Lindane), Delta HCH, Butachor, Chlorpyrifts, 2.4-Dichlorophenoxy Acetic Acid, DDT (o, p and p, p-Isomers of DDT, DDE and DDD), Endosulfan (alpha, beta and sulphate), Redioactive material (alpha emitters, beta emitters Bq/I.max), Ethion, Isoproturon, Malathion, Methyl Parathion, Monocrotophos, Phorate, Trichlocomethane, Bromoform, Dibromochloromethan, Bromodichloromethene, Chloroform. (Note: (i) Cost of collection of samples from any location at and around Rajouri area under the AOR of GE 862 EWS on requirement basis is deemed to be included in the quoted rate. (ii) Cost of transportation of samples form the location of the source to the laboratory within specified time is deemed to be included in the quoted rate. (iii) Test has to be carried out as and when required basis.)

M/S AKHILESHWAR ASSOCIATES (BID ID -3111016)

M/S PARSHOTAM KUMAR GUPTA (BID ID -3111724)