Renovation of Temporary churachandpur medical college and Construction of store hall of Temporarry churachandpur medical college at Kyamgei Imphal, Manipur

Amount

EARTH WORKS:

Pr+B14:B44oviding and fixing Aluminium doors,windows and ventilators shutters and pastition etc. with EPDM rubber or neoprene gasket etc complete as per architectural drawings and directions of the engineer in charge(Cost of aluminium snap beadig shall be paid in basic item) with floating glass panes of 8 mm thickness

Granite stone slab flooring over 20 mm ( average ) thick base of cement mortar 1 : 6 ( 1 cement: 6 coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete withGranite stone slab flooring over 20 mm ( average ) thick base of cement mortar 1 : 6 ( 1 cement: 6 coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Earth wSH-WS & SI (Earth Work) work in surface excavation not exceeding 30 cm in depth but exceeding m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be All Kinds of soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Concrete Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level:( 1 Cement.• 3 coarse sand 6 graded stone aggregate 40 mm nominal size)

1:4:8 ( 1 Cement: 4 coarse sand 8 graded stone aggregate 40 mm nominal size)

FormWork Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access

RCC Work Reinforced cement concrete work in beams, suspended floors, roofs having stope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars

Precast Providing, hoisting and fixing upto floor five lovol procast reinforced comont concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the tike including tho cost 01 required contoring, shuttering but excluding cost of reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3graded stone aggregate 20mm nominal size).

BRICK WORKS: Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: a) Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Honey-comb brick work 10/11.4 cm thick with 1st class common burnt clay FP.S. (non modular) bricks in superstructure above plinth level and upto floor V level in cement mortar 1 : 4 ( 1 cement : 4 coarse sand)

Flooring : Cement concrete flooring 1:2:4 (I cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost Of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.

Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (I cement : 3coarse sand) finished with a floating coat of neat cement 18 mm thick

Sanittary Installation Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with scat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever). conforming to IS : 7231. with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

White Vitreous China Wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps

Providing and fixing a mm dia C.P. / Ses Jct with flexible tube upto 1 metre tong with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing 600x450 mm bovolod cdgo mirror of superior 1,053.30 glass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 each 195.80 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, tenching, refilling & testing of joints complete as per direction of Engineer in charge 75 mm dia

110 mm dia

Water Supply Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the wall etc. 20 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing 01 pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm diameter

32 mm diameter

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. External work 32 mm diameter

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm diameter

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm diameter

Providing and placing on tcrrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and tho baso support for tank.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points Of approved quality conforming to IS:8931 15 mm nominal bore

IEI (1.2) Wiring for light point /fan pt./ Exhaust fan pt./Call bell pt./ with 1.5 mm ² FRPVC insulated copper conductor single core cable in surface/ recessed steel conduit with modular type switch modular plate suitable G.I box and earting the point with 1.5 mm ² FRPVC insulated copper conductor single core cable etc as required 1) Gr A

(1.68) S/F suitable size G.I box with modular plate and cover infront on surface or recess i/c P/F 3 pin 5/6 amp modular socket outlet 5/6 amp modular switch,connectionpainting etc as reqd.

Suitable size GI box with modular plate and in front on surface or in recess i/c p/f 6 pin 16/15 amp modular socket outlet 15/16 amp modular switch, connection painting etc as required

(1.7) wiring for circuit/ submain wiring along with earth wire with the (following size of) FRPVC insulated copper conductor single core cable in surface/recessed steel conduit etc as reqd. 1) 2x1.5mm²+ 1x1.5mm² Earth wire

2) 2x4.0mm²+ 1x4.0mm² Earth wire

3)2x6.0mm²+ 1x6.0mm² Earth wire

(1.87) S/F (following way) single pole and neutral, sheet steel MCCB DB 240 v on surface /recessed complete with tinned copper busbar, neutral busbar, earthbar, dinbar, hinged front acrylie cover for the MCCB knobs datacable grand plate, enter connnection, phosphatised and power painted including earthing etc, as required ( but without MCB/RCCB/ isolator) (1) 2 + 4 way

(1.107) S/F 5amp to 32 amp rating 230 V "B" series for lighting and other purposes, load of (following poles)in the existing MCB DB complete with connection, testing and commissioning etc as required.(2) Single pole and neutral

(1.109) S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as required. (1) 40 Amp

1.84) P/F (following capacity TP&N) dis-connector fuse switch unit inside the exiting cubicle panel board with I.S.I mark HRC fuses i/c drilling holes in the cubicle panel board making connection as reqd. (2) 200 Amp TP & N

P/F 200Amp TPN stand ground on load on load change own switch (compact design) 415/500v including connection to as required.

S/F Busbar chamber with 4 strips copper busbar of length 600mm suitable for 2oo amps capacity complete with all accessories i/c connection earthing the body as required.

(8.01) S/F 48'' sweep (1200mm)a.c ceiling fan complete with down rod, canopy, 3 blades but without regulator etc as reqd.( Havells or similar 5 star)

(1.62) s/f stepped type electronic fan regulator on the modular plate switch box i/c connection but excluding modular plate etc as reqd.

s/f recess mounting LED down lighter .

SH-Construction of Store hall at Temporary Churachandpur Medical College at Kiyamgei Earth work Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5M including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50M (a) All kinds of soil.

Filling available excavated earth ( excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering lead upto 50 m and lift upto 1.5 m

Filling in plinth with sandy soil under floors including watering, ramming, consolidating and dressing complete.

Stone Works: oulder with minimum size of 300mm for pitching at Site

Cement Concrete Works : Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering (a) 1:4:8 (1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size )

RE-INFORCED CEMENT CONCRETE WORKS: Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level: (a) 1:1.5:3 ( 1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral staircases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with (a) 1:1.5:3 ( 1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) i/c attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level but excluding the cost of centering and shuttering and reinforcement:(a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Steel Reiforcement : Steel reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete. (a) Thermo-Mechanically Treated bars

FORM WORK: Providing form work i/c centering & shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in-situ reinforced concrete and plain concrete work in:a) Foundation footings, bases of columns etc. and mass concrete.

(b) (i) Columns, pillars,posts and struts (square, rectanglar or polygon in plan)

(c) sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1m in depth

Brick Works:: Local first class brick in foundation and plinth in cement mortar 1:4 (1 cement :4 coarse sand)

Steel Works: Steel work in built up tubular trusses includidng cutting, hoising, fixing in position and applying a coat ofapproved steel primer red oxide zinc chrome primer (conforming to IS :2079 ) welded and bolted inclusing special shape washer etc. complete. Electrical resistance welded tube (Conforming to IS:1611-1979).

Providing and fixing ridges and hips …... and EPDM washer etc. Complete. (a) Close fitting adjustable ridges

FINISHING: 15 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.

Providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete.

Varnishing with varnish of approved brand and manufacture. (a) Two or more coats glue sizing with spar varnish

IEI (1.2) Wiring for light point /fan pt./ Exhaust fan pt./Call bell pt./ with 1.5 mm ² FRPVC insulated copper conductor single core cable in surface/ recessed steel conduit with modular type switch modular plate suitable G.I box and earting the point with 1.5 mm ² FRPVC insulated copper conductor single core cable etc as required 1) Gr A

(1.68) S/F suitable size G.I box with modular plate and cover infront on surface or recess i/c P/F 3 pin 5/6 amp modular socket outlet 5/6 amp modular switch,connectionpainting etc as reqd.

Suitable size GI box with modular plate and in front on surface or in recess i/c p/f 6 pin 16/15 amp modular socket outlet 15/16 amp modular switch, connection painting etc as required

(1.7) wiring for circuit/ submain wiring along with earth wire with the (following size of) FRPVC insulated copper conductor single core cable in surface/recessed steel conduit etc as reqd. 1) 2x1.5mm²+ 1x1.5mm² Earth wire

2) 2x4.0mm²+ 1x4.0mm² Earth wire

(1.87) S/F (following way) single pole and neutral, sheet steel MCCB DB 240 v on surface /recessed complete with tinned copper busbar, neutral busbar, earthbar, dinbar, hinged front acrylie cover for the MCCB knobs datacable grand plate, enter connnection, phosphatised and power painted including earthing etc, as required ( but without MCB/RCCB/ isolator) (1) 2 + 4 way

(1.107) S/F 5amp to 32 amp rating 230 V "B" series for lighting and other purposes, load of (following poles)in the existing MCB DB complete with connection, testing and commissioning etc as required. (2) Single pole and neutral

(1.109) S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as required. (1) 40 Amp

(1.84) P/F (following capacity TP&N) dis-connector fuse switch unit inside the exiting cubicle panel board with I.S.I mark HRC fuses i/c drilling holes in the cubicle panel board making connection as reqd. (1) 100 Amp TP&N

(2.02) P/F125Amp TPN stand ground on load change own switch (compact design) 415/500 v including connection to as required.

(5.04) S/F Busbar chamber with 4 strips copper busbar of length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing them body as required

305mm sweep exhaust fan complete with all accessories connection etc as required

s/f recess mounting LED down lighter .

Yumnam Somendro Singh (BID ID -8267)

M/s G.Thaninjao R.Naga and Sons (BID ID -8265)