Item 3 Construction of Block 3 B1 Plus B2 Plus G Plus 12 26 HIG Flats at AIS Residency Sector 17 Pratap Nagar Jaipur

Amount

Providing and fixing 1 mm thick laminate on flush doors including cost of fevicol, nails etc complete in all respect

Providing and fixing factory made uPVC white colour 3 Track sliding with 2 glazed & 1 mosquito net shutter windows / doors comprising of uPVC multi-chambered frame with 92/52 mm, sash ( window -32/68mm, door 32/84mm), and interlock (34/19mm) where ever required) extruded profiles duly reinforced with 1.5 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), upvc profile should comply with weathering test 24GJ/Mtrs2 at 12000 hrs UV exposure (according to BS 513 16-GJ/Mtrs2 at 8000 hrs UV exposure and impact resistant test as per EN12608 uPVC extruded glazing beads of appropriate dimension, TPE gasket, stainless steel (SS 304 grade) mesh, zinc alloy (white powder coated) touch lock, Sliding rollers of appropriate weight, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc as required. 5 mm clear toughened Glass included.-

Providing and Fixing of white vitreous China wall mounting double syphonic type European water closet with concealed cistern with Cover Plate 40mm Size with all accessories including cost of C.P. bolts, nuts, C.I. chair or other hanging arrangements, special soft close toilet seat & cover with C.P.wall hinges & rubber buffers including cutting and making good the walls and floors where required.

Providing & fixing S.S. 304 Grade Auto Close Floor Drain With Size (127 X 127)mm, drainage dia should be 74 mm complete in all respet as per direction of engineer in charge

Providing & fixing S.S. 304 Grade Auto Close Shower Floor Drain With Size (100 X 900)mm, drainage dia should be 58 mm complete in all respet as per direction of engineer in charge

Providing and fixing pressure reducing valve for inlet pressure 4-6 kg with flow rate depicted 24 to 27 litre per minute. 32 mm dia

Supplying, Installation, testing and commissioning of passanger/goods/stretcher or bed elevator of group 1 (Having gearless drive with machine room) having following main features:

(a) MOTOR : Gearless lift drive comprising of high starting torque lift duty, 3 phase 440 Volts A.C. permanent magnetic synchronous motor of proper rating with high efficiency shall be used.

(c) Traction Media: main hoist falt coated steel belt/rope. Thimbles of spring permit adjustment of uniform tension for smooth operation of the elevator Pulse belt monitoring system to avoid the cut in the belt.

(d) Car : Car should be with MS platform with bracing of adquated size and to sustain the impact load cabin plus passangers with safety factor of fire for steel with antiskid PVC flooring and side panels should be of stainless steel with honeycomb / moonrock finish of sheet of grade 304 duty with S.S. handrails. Car ceiling shall be steel finish with aesthetic appreances with LED ceiling lights. The size of the car shall be taken as per available lifr well size and relevant code of BIS for lifts. Car panels will also be of SS 304 grad efinished with emergency stop device, emergency alarm, mechanical door safety device, fuul length infra-red curtain in caar door, facility of auto / attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. Agency shall also provide & install 1 No 2 MP, IR , IP based ceiling mounted dom Camerian the car complete with connecting cables & accessories (To be connected with existing CCTV system in the building). The inspection unit shall be provided at the top of car.

(e) Landing Doors : All landing door shall be fully automatic centre opening/ telescopic made of with honeycomb / moonrock finish of sheet of grade 304 with key holes and infrared curtains with unlocking facility from outside.

(f) Emergency light: Appropriate rechargeable battery operated LED emergency light in the car and along with alarm switch shall be provided.

(g) ARD : Automatic rescue Device (ARD) shall be provided according to passener capacity with SMF batteries of approved brands as per BSR

(h) Audio-Visual Indication : Audio visual indication in the lift car, showing over loading such that doors kept open till excess load is removed.

(i) Scrolling Indicators : Digital Scrolling indicator system for up-down arrow with floor position indicator shall be rovided inside the car and at all stops/floors.

(j) Buffers : Spring buffers/PU Buffers shall be provided.

(k) Car Fan : Energy Efficient Car fan/ blower with automatic sleep timer shall be provided.

(l) Voice Annunciator : Voice annunciator with suitable music shall be provided in lift car

(m) Self diagnostics system for operational and safety parameters shall be provided in control panel

(n) Mechanical / Electronic over speed governor, door key holes in the floor doors, fireman switch shall be provided.

(o) Lift machine hoisting arrangement in the lift machine room, counter balance to promote smooth and economic operation complete with steel guide rails for the car & counter weight, Trap Door, Lifting hoocks as required and monkey ladders for lift pit should be provided by the agency along with all other steel structure works, foundations for the machine etc as required.

(p) Permanent wiring in lift machine room and in lift well with providing and fixing of electrical distiribution board complete with SP & TP MCB'S proper numbers of light points, with LED fixtures, exhaust fan, 2 nos copper plate/ chemical earthing with 8 SWG copper earth wire and plug points shall be provided by the agency (power supply of 3 phase 440 V shall be made available by department in lift machine room)

(q) all civil work related to installation of lift like finishing, cleaning and levelling of lift pit, white wash of lift well and in machine room shall be done by the lift erecting agency without any extra cost.

(r) Granite or marble cladding around all landing door openings shall be in the scope of lift installation agency and additional payment shall be made according to the actual measurement / schedule by the department to the lift agency.

(s) Agency has to provide all working drawings and documents to comply latest BIS specifications and make proper liasion service for obtaining all necessary permissions.

Note : Approved make of Group 1 : Mistsubishi / Otis / Kone / Schindier (As per PWD Electrical BSR 2013 Addendum-3 vide order no 1201 dated 21-01-2019)

(A) 8 passangers/544, 15 stops, rated speed Adjustable upto 1.0 mtr / sec with 2 years comprehensive maintenance / DLP.

(B) 15/16 Bed Elevator/1020/1088 Kg, 15 stops, rated speed Adjustable upto 1.0 mtr / sec with 2 years comprehensive maintenance / DLP.

The last hanger at the end of each main runner should not greater than 600 mm, from the adjecent wall. Flush fitting 1200 mm long silhouette to be intr lock between main silhouette longer than 600 mm required independent support, 600 x 600 mm module to be formed by lifting, 600 mm. Flush fitting cross silhoutte enterely between 1200 mm. ARMSTRONG wall fixing material powder oated seured to wall as per manufaturer speifiation. The eiling tiles of fine fissured/ ADRLA HYGIENE having 130.00 sqm. humidity resistane 95% RH, Light refletane more Sqm than 90%, N.R.C. 0.20, Soundattenuation 34dB, Thrmal ondutivity 0.052 - 0.057 W/m0C, olour White, fire performane lass 0/ lass I (BS476)

Providing and fixing spacers between tiles and filling the grout with colour to match the shade of the tiles, finishing and cleaning the tiles of extra grout etc complete width of spacer 3 mm

Epoxy Grout with resin hardner 3parts, non shrinkable, acid resistant, crack resistant and water proof

Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 20 amp. Switch and socket outlet , making connection , testing , etc. as required.

SITC Nickel chrome plated brass Water Curtain Nozzels, K-45 @ 3.5 kg/sq cm, complete with couplings , fittings etc complete

SITC of 15 mm dia quartzoid bulb type sprinkler of rating 60 degree celcius Side Wall Sprinklers

SITC of Deluge Valve. The deluge valve shall be of hydrauliSupply, erection, testing & commissioning of Deluge Valves. The deluge valve shall be of hydraulically operated diaphragm valve of quick release type with pilot trim,electrical trim ( 24 V Solenoid valve) ,water motor gong and all associated fittings/accessories and shall be suitable for vertical mounting. The body and clapper assembly material shall be of ductile iron with UL/FM aaproval.

Bidder Name

Amount

M/S RJB ENGINEER AND CONSTRUCTION CO(GSTN-08AAHFR6772R1Z6)

Kumawat Contractors(GSTN-08AABFK8231C1ZO)

bhorilal mohanlal(GSTN-08AABFB2993G1ZG)

Lakhlan kurashi Const. Co.(GSTN-08AAAFL9525H1Z7)

M/S LADDURAM BABU LAL(GSTN-08AACFL9622M1ZW)

M/S Anand Construction Group(GSTN-08AFNPR9714G1ZW)

M/s Ashok Kumar Mahnot(GSTN-08AAIFA2150R1Z6)

prabhu dayal kanojia(GSTN-NA)

M/S Anand Construction Group

M/s Ashok Kumar Mahnot

prabhu dayal kanojia

Lakhlan kurashi Const. Co.

bhorilal mohanlal

M/S LADDURAM BABU LAL

Kumawat Contractors

M/s Ashok Kumar Mahnot

Lakhlan kurashi Const. Co.

M/S LADDURAM BABU LAL

bhorilal mohanlal

M/S RJB ENGINEER AND CONSTRUCTION CO

prabhu dayal kanojia

Kumawat Contractors