SPECIAL REPAIR TO BLDG NO T-13, T-17A (COOK HOUSE), P-133 (JCO ACCN) and SP-158 (LRW and MT OFFICE IN THE AOR OF AGE B/R-I UNDER GE 969 EWS

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level) all as specified and directed.

Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of the permishes complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded stone aggregate as in floor finished even & fair complete all as specified and directed.

M&L non skid coloured printed ceramic tile 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified.

M&L non skid coloured printed ceramic tile 7 to 8 mm thick (Square / rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified.

M & L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over and incuding 15 mm thick cement plaster using CM (1:4) .complete all as specified and directed.

M&L 20-25mm thick machine cut kota stone slab flooring over 15mm thick cement screed base in cement mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 20-25mm thick machine cut kota stone slab in riser of steps, skirting, dado and pillar laid including 15mm thick rendering on and stone masonry surfaces or surface other than fair face of brick-work or concrete surfaces on one side of lathing jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for rendering plaster 10 mm thick on brick work or cement concrete surfaces in cement mortar 1:4 including finishing the surface even and smooth without using extra cement complete all as specified.

M & L for rendering plaster 15 mm thick on stone masonry surfaces or surface other than fair face of brick or concrete work or on one side of lathing in CM (1:4) using water proofing compound @ 3% be weight of cement and finished surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only Integral waterproofing compound.

S&F Sheet glass thickness 4.00 mm,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer all as specified.

M&L for preparation of newly or previously untreated surfaces and finishing wall surfaces with Acrylic Smooth exterior paint of required shade and applying two coats @ 1.67 ltr/10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for complete removal of existing treatment on old wall surfaces & Finishing walls with Acrylic Smooth exterior paint and applying two coat @ 1.67 ltr/10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

Preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

S&F 6 mm thick insulation consisting of PVC insulated panels as in wall having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing Note : Panelling shall be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

S&F 6 mm thick insulation consisting of PVC Insulated Panels as in ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing Note : Panelling shall be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excl flushing cistern ) including flush pipe 60 cm long complete all as specified and directed.

S&F in repair vitreous chine wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl braxkets with waste fittings and connection pipe etc including pedestal complete all as specified

S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed.complete all as specified and directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 450mm fixed to GI tubbing complete all as specified and directed.

S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified.

S&F in repairs pillar taps, 15 mm dia cast copper alloy fancy type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe.complete all as specified.

S & F soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified.

S&F 15 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceiling/ floors complete all as specified & directed.

S&F 20 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilingS&Floors complete all as specified & directed.

S & F 110mm bore PVC (SWR) pipe single socket any length with rubber ring joints laid in trenches or in floors complete all as specified.

S & F 75mm bore PVC (SWR) pipe single socket any length with rubber ring joints laid in trenches or in floors complete all as specified.

S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement complete all as specified.

S&F 100mm bore PVC (SWR) junction double (Double 'T') equal or unequal, all as specified.

S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement complete all as specified.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 mm long between flanges, complete all as specified and directed.

S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard complete all as specified

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type, disposal of rubbish,complete all as specified.

S & F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc. 1.5 sq. m each (without taking of shutters from the frame) and removal from site all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m (without taking of shutters from the frame) and removal from site all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all al specified.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each all as specified and directed.

S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood (kail),(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers completed, all as specified.

S&F 2nd class soft wood (kail) glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass,etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats, all as specified.

S&F aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, all as specified.

S&F M S butt hinges 100 mm medium weight, cold rolled mild steel all as specified and directed.

S&F aluminium handles 100 mm , cast type,anodised all as specified and directed.

S&F aluminium handles 150 mm , cast type,anodised all as specified and directed.

S&F aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed all as specified and directed.

S&F aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed all as specified and directed.

S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for cement concrete in roof kerbs, roof padding or mud stops, rounded or chamfered on edges using water proofing compound complete all as specified and directed.

M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.

S&F aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

Demolition and breaking up 100mm PVC/AC drain pipes set in cement mortar all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness inlcuding cover fillets complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Hacking out old broken glass /gauge (any thickness, size, quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

M & L of 6 mm thick veneered decorative plywood, grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work, all as specified.

M & L of 6 mm thick veneered decorative plywood, grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work, all as specified.

M S butt hinges 75 mm medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

M&L 50 mm thickness cement concrete 1:2:4, type B-1 (20mm graded stone aggregate) as in flooring finished even & fair complete all as specified and as directed.

M&L for 2nd class 35mm thick plain frame panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L glazed and skeleton shutters thickness 30 mm,(2nd class softwood) (kail), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, sectionspecified 8 clause 8.24(b) complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite, all as specified.

M&L plain fillets square rectangular or triangular in section using 2nd class soft wood (kail) clean swan secured with nails exc 13 sqcm & n.exc 25 Sqcm in section, all as specified.

M&L plain fillets square rectangular or triangular in section using 2nd class soft wood (kail) clean swan secured with nails not exc 3 sqcm in section, all as specified.

M&L preparation of new wooden surface of any description and two coat of synthetic enamel paint over a coat of pink primer, not otherwise descri-bed,over 10cm width or girth complete all as specified and as directed.

M&L preparation of old wooden surface of any description and two coat of synthetic enamel paint over a coat of pink primer, not otherwise described,over 10cm width or girth including complete removal complete all as specified and as directed.

M&L for rendering plaster 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed.

M&L weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed complete all as specified and as directed.

PVC (SWR ) pipes,110 mm bore, single socketed,in any length, with rubber joints, fixed to walls complete including fixing clamps etc with nut & bolts incl taking down of pipe, all as specified.

S &F repair bib tap, 15 mm of cast copper allowy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified & directed.

S&F 16mm thick HDHMR waterproof MDF board for cabinets fixed with screws to timber frame work complete all as specified and as directed

S&F 2nd class soft wood (kail) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified

S&F in repair 2nd class softwood (kail) in scantling clean swan timber framed and fixed to the position including dismantling existing scantling complete all as specified

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane complete all as specified and as directed.

S&F 2nd class softwood (kail) clean sawn with butt joints eaves boards 20 mm thick complete all as specified and as directed.

S&F SS auto concealed hinges (Zero degree) fully overlay cabinet hinges) fixed complete all as specified and directed.

S&F SS modular kitchen basket accessories & multipurpose utensils cabinet drawer with sliding channel for kitchen wired ( consist of set of 06 Nos i.e curtlery basket-01, Cup & saucer-01, Thali basket-02 & Plain basket -03 Nos) fixed complete, all as specified.

S&F stainless steel sink 1mm thick, without drainage plug, washers,PVC waste pipe, union, CP coupling & cantilever brackets including bedding cement and sand mortar,overall size of sink 915mmx460mm, bowl size 410mmx310mmx160mm complete all as specified.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified

-Ditto- all as per item No 93 but 20mm bore, all as speicified

Complete removal of existing treatment on old wall surfaces and applying three coats of white wash complete all as specified.

Demolition of brick work, cement concrete block masonary, stone masonary or boulder masonry built in cement mortar .complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for, all as specified.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm to face stones and dressing of face beds and joints,as specified,of random rubble walling,uncoursed or brought upto courses for Granite or Trap Stone all as specified and directed.

S&F forming construction joint 150mm deep x 10mm wide filled with sealing compound, all as specified.

M&L 150mm thick cement concrete 1:4:8, D-2 using 40mm graded aggregate in sub base floor, paving and hard standing complete all as specified and directed.

M&L for cement concrete work in pavement/ hardstanding of flexural strength 40 Kg per square centimetre in field using 400 Kg of cement per cum thickness of concrete 25cm or less complete all as specified and directed.

M&L for walling or random rubble stone masonry,uncoursed well bonded bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

-Ditto-all as per item 102 but except stone only complete all as specified and directed.

M&L forming 12mm thick expansion joints for 150mm thick concrete, filled with pre-formed bituminious filler and top 30mm primed and sealed with sealing compound, Grade `A', complete all as specified and directed.

M&L forming contraction (dummy) joints 65mm deep x 10m wide, filled with sealing compound `A' grade, all as specified.

M&L raised pointing in cement mortar 1:4 to random rubble stone masonry, uncoursed or brought upto courses all as specified and directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar complete all as specified and directed.

M&L for cement concrete type C2, 1:3:6 (40mm graded aggregate) as in subbase under floor complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified.

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall with the help of heavy duty ISI mark PVC casing capping strip in any length wiring system and along with its all connected fittings accessories including providing of wooden board with bakelite sheet for housing / mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc for one light point / fan point controlled by one switch of one way point wiring system complete, all as specified & directed by EIC

-Ditto- all as per item No 110 one 3 pin 5 Amp switch socket outlet on independent board, all as specified.

-Ditto- all as per item No 110 one 3 pin 5 Amp switch socket outlet on same board with accessories, all as specified.

-Ditto- all as per item No 110 but 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor for 15 amps switch socket outlet on independent board, all as specified.

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system concealed on wall with the help of heavy duty ISI mark PVC conduit in any length wiring system and along with its all connected fittings accessories including providing of modular type terminal sunken boxes and dully fixed it concealed on wall or surface on wall and providing alongwith modular type back and face top covered plate frame for housing / mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc for one light point / fan point controlled by one switch of one way point wiring system complete, all as specified & directed by EIC Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is.

-Ditto- all as item No 114 but for one light board control by 2 way switches

-Ditto- all as item No 114 above but for one switch socket combination 5 Amps on independent board.

-Ditto- all as item No 114 above but for one switch socket outlet 5 Amps on same board with other switches.

-Ditto- all as per item No 114 but 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor for 15 amps switch socket outlet on independent board, all as specified.

S&F switch piano flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed

S&F socket outlet 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed.

S&F moduler switch 1 way 6 Amp, one module, complete all as specified and as directed

S&F flush type socket 6A 2/3 pin combined 2 module, 2 in 1, 3 pin complete all as specified and directed.

S&F moduler switch 2 way 10 Amp, complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed.

Supply and fix ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as specified and directed

S&F in repairs double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 way, 240V with 200 Amps rated bus bar complete fixed properly in concealed position and to provide required sizes of flexible conduit any open surfaces near DBs of cable/wires all as specified.

S & F in repairs MCB, DP 40 Amps 240 Volts 'B' curve, complete all as specified and as directed

S&F LED lamp 10W all as specified and directed.

S&F switch piano flush type, single pole, one way 16 amp 240 volts, complete all as specified and directed.

S&F switch socket combination 2 in 1,3 pin, 5 & 15 Amps flush type universal complete all as specified and directed.

S&F socket 6A/16A 2/3 pin combined 2 module, 2 in 1,3 pin, 16 amps complete all as specified and directed.

M&L sub main wiring with two run single core 4 sqmm core 4 sqmm FRLS copper conductor cable PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.0 sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall/ceiling complete. Note:- Two runs of main cable and one run earth wire with capping & casing will be measured as one RM.

S&F LED lights fitting 1x20 W, 220V, AC decorative box type with driver holder, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete, all as specified and directed.

S&F in repairs lamp holder PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S&F ceiling rose , 3 terminal/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F moduler switch 1 way 16 Amp, 1 moduler, all as specified

Supply laying and testing cable XLPE insulated, screened, PVC bedded, GI strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm x 4 core, all as specified and directed

Supply laying DWC pipe suitable size for OD 50mm and ID 40mm for XLPE cable aluminium conductor 25 sqmm 4 core, all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth for laying of cable up to proper level complete all as specified and directed by Engr-in-Charge.

Removing, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified and directed by Engr-in-Charge.

Removing, surplus excavated material from excavation not exc 50 meter and depositing where directed at a level not exc 1.5 meter above the starting point complete all as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200 copper winding of sweep 300mm including making hole in wall if required, complete all as specified and directed by Engr-in-Charge.

S&F in renewal LED mirror light 10W, decorative ultra slim square profile with extruded ploycarbonate, environmental friendly, energy efficient ready to used pack suitable for surface mounting on ceiling or wall complete all as specified and directed.

S&F in repairs double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 415 volts with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cable/ wires all as specified and directed.

S&F electric water heater, storage vertical type outer body Engineering Thermoplastic with PUFF injected type insulation, steel tank with glass lined coating inner tank and heating element (copper tube) upto 2 KW capacity 25 litre, 230 Volts AC single phase BEE 5 star rated complete with all accessories such a FRLS grade 3 core PVC cord, multifunctional safety valve, thermostate, connection pieces etc. complete all as specified. Note:- Internal water supply upto service connection wil be measeured and paid separately

S&F in repairs, MCB SPN 40 to 63 amp rating 240V, 10KA 'C curve complete with connection testing and commissioning complete all as specified and directed.

S&F MCCB, DB TPN, double door, IP-43, 8 way with 200 A rated bus bar having earth terminal, including MCCB 250 Amps as incommer and MCB SP as out going for DB SPN complete in all respect concealed in wall including making electrical incoming and outgoing connection with legs/thimbles all as specified and directed.

S&F in repairs MCCB 4P, 63 amp rating, 415V, 16 KA complete with connection testing and commissioning complete all as specified and directed.

S&F in repair MCB, SPN 63 Amps, 240 volts 'B' curve complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 volts 'B' curve complete all as specified and directed.

S&F ceiling fan complete with blades, down rodes, electronic regulator and accessories, 230V, 1200 mm sweep/1400mm sweep minimum air delivery 210/245 cfm with service value 6.00 BEE 5 star rated with BLDS motor, all as specified and directed.

S&F LED inverter bulb 12 watt all as specified.

S&F regulator suitable for BLDC fan 230 volts 50 Hz complete all as specified and directed.

Security light fitting energy saving high efficiency LED street light fitting 35 watts, 5700 K. IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ 0076 from ceilling rose/ PVC connector to light fittings all as specified and directed by Engr-in-Chrage.

S&F GI hood 5 feet wide and having 4 mtr ducting, heavy duty fan, (Electirc chimeny) complete all as specified and directed by Engr-in-Charge.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc

M/S STARE BUILDERS (BID ID -3427470)

M/s SONA ULLAH LONE AND SONS (BID ID -3428156)

MOUNIKA ENTERPRISES (BID ID -3434549)

M/S ESS EMM ENTERPRISES (BID ID -3427953)

M/S GHULAM RASOOL LONE AND SONS (BID ID -3424874)