Estimate for civil works furniture and furnishing of Interstate Checkpost

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ). 600 x 600 mm

Providing and laying Anti skid Ceramic floor tiles of size 300 x 300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect

Providing and fixing in position CP Brass single lever surgical mixer with swinging spout approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.

Providing & Fixing in postion stop cock /Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing

Single Socket Type B

a) 160mm o/d SWR UPVC pipe lines laidcomplete

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc.

With 100mm x 75mm i/d Floor Trap(weighing 4.0 Kg)

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.

For 110mm o/d pipes

Elbow 90 Degree (All side socketed)

For 90mm o/d pipes

Elbow 90 degree (all side socket)

Coupler

Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete.

Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform,vanity counter and similar location in marble/granite/ stone work, including necessary holesfor pillar taps etc. including moulding, rubbingand polishing of cut edges etc. complete.

Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite(size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of theEngineer-in-charge) with or without 10 ltr.chinaware matching flushing cistern and seatcover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing jet spray with 2'-6" long With C.P. Brass nut

Providing & Fixing in postion 15 mm i/d bibcock of approved make (to the approval of Engineer-in-charge )complete in all respect

Providing & Fixing in postion stop cock /Angle valve of approved make (to theapproval of Engineer-in-charge ) complete in all respect.

C.P.brass 15mm Angle valve without flange

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.

PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut

Providing and fixing in position Vitreous Chinaware white urinal withconcealed or inbuilt P-trap (size 310x370x640 mm) with builtin water seal, outlet to wall and water inletfrom back of approved make (to the approvalof Engineer-in-charge) complete in all respect.

Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete having span:- Up to 15.00 Mtr. Span (50mmx25mm)

Providing and fixing in position automatic brass Ball Cock in tanks (A) Brass Ball Cock with rod and Plastic Ball of 25mm i/d

SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mmdia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches withindicator etc. and covered with Frame Plateetc., PVC connector (For Fan Box and Call Bell), MS saddle clamp, PVC Circular junctionBoxes (Four way 1½" deep for walls), bonding to earth with PVC insulated copperconductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of abovematerial and painting as required:

Wiring 6Amp. wall socket point

Wiring 16/20Amp. power plug control point

Providing & Fixing of 40mm Wall PUF(polyurethane foam ) insulated thick Panel with Prepainted Galvanised Ironsheet both sides in 40±2 Kg Density The PU panel shall be CFC( Chlorofluorocarbon)free and Zero Ozone depleting panel using N Pantane blowing agent & made out of continuous line running on uninterrupted power supply. Panel shall have pre coated GI sheet on both side of Polyurethane Foam confirming to IS 12436:1988. The pre coated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS : 277 : 1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The panels shall be vertically joined together by tongue and groove joints. The PU Foam shall be self-extinguishing, fire retardant type having minimum density of 40 Kg/Cu.mt (+, -2 Kgs). Surface of steel sheets has plain & light grooves to enhance their strength & aesthetic appearance complete with corner panels as required.

Providing & Fixing of 30 mm Roof PUF(polyurethane foam ) insulated thick Panel with Prepainted Galvanised Ironsheet both sides in 40±2 Kg Density The PU panel shall be CFC( Chlorofluorocarbon)free and Zero Ozone depleting panel using N Pantane blowing agent & made out of continuous line running on uninterrupted power supply. Panel shall have pre coated GI sheet of 0.5mm thickness on both side of Polyurethane Foam confirming to IS 12436:1988. The pre coated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS : 277 : 1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The panels shall be vertically joined together by tongue and groove joints. The PU Foam shall be self-extinguishing, fire retardant type having minimum density of 40 Kg/Cu.mt (+, -2 Kgs).The centre to centre pitch of crest profile on top sheet should be between 250mm- 270mm to ensure proper water flow. The roof shall have a projection of minimum 300mm on all sides. Metallic facing sheets are plain with intermediate small ribbed finish on inner skin & Hi Rib sheet as outer skin.(Make: Kingspan Jindal, Sintex, Mectecno,LLoyd insulation)

ROOFTOP

WINDOW

VENTILATION WINDOW

COUNTER WINDOW

UPVC FLUSH DOOR

(i) Triple Layer Tanks (200ltr)

Office Table

Office Chairs

A.C 1 ton

LED LIGHT

Wall Mounted moving Fan

luminous Invertor with battery 200watt

Vehicle (M&M passenger car SUV Scorpio N Z4 D MT 2WD 7STR BS6.2)