Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹27.1 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹34.6 L+₹7.5 L (27.8%)Rejected-Finance | L-2 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
12 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
PERIODICAL SERVICES TO CERTAIN BUILDINGS AND MISC B/R WORKS IN ZONE A AT MIRAN SAHIB UNDER GE JAMMU
2023_MES_607016_1
GEJC-40/2023-24
Open Tender
Civil Works
Item Rate
210 days
AoR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹80,000
Yes
4 Sept 2023
30 Jun 2023
14 Aug 2023
22 Jul 2023
12 Aug 2023
29 Jul 2023
Amount
Material and labour for preparation of old plastered surfaces and applying one coat of white wash on walls complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces of ceiling and applying two coat of white wash over and incl a coat of primer complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces and applying one coat of Oil Bound distemper on walls complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying two coats of Oil Bound distemper any color on walls complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying one coat of cement based paint up to 12 metre height complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying two coats of cement based paint up to 12 metre height complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying two coats of exterior emulsion paint any colour up to 12 metre height complete all as specified and directed colored approved by Engineer-in-Charge.
Material and labour for preparation of old surface of wood, rubbing down by sand, paper washing by water and applying one coat of synthetic enamel paint over wood surface over 10 cm width or girth complete all as specified and as directed.
Material and labour for preparation of old surfaces of steel over 10cm width or girth including rubbing down by sand paper, washing by water or scrapping the old coat by blowing lamp and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished fair and even without using extra cement and including taking down cement plaster from brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for rendering 5 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement including two coats of oil bound distemper over and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for preparing new plastered surfaces and applying two coats of cement based paint over and including one coat of primer complete all as specified and as directed.
Material and labour for preparing new plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparing new plastered surfaces and applying two coats of oil bound distemper over and including one coat of 1 mm wall care putty on a coat of primer complete all as specified and as directed.
Material and labour for cleaning and preparing kota surfaces and polishing of existing kota stone complete all as specified and directed.
Material and labour for writing letters or figure (Block roman itallic or Indian) 10cm high as in building No's complete all as specified and directed.
Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer in Charge.
Demoilition of lean/cinder concrete filled in sunken slab , wire brusing the surface ,cleaning all loose dirt by dusting/watering sunken portion of WC, Toilet etc and applying cement slurry @1.5 kg per Sqm complete all as specfied and directed
Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) not exceeding 1.50 Sqm and removing from site complete all as specified and directed.
Taking down shutters from the frame of any description exceeding 1 Sqm but not exceeding 2 Sqm each leaf and removing from site complete all as specified and directed.
Material and labour for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.
Material and labour for Non - skid joint free coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge..
Description all as per serial item no 27.00 above but in vertical surfaces including 10 mm thick cement rendering /backing coat of cement in CM 1:4 complete all as specified and directed.
Material and labour for Non skid tiles coloured exc 0.06 sqm and n.exc 0.11 sqm , 6-7mm thick of any colour pattern and 1st quality as approved by GE in floor set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and Shade, Colour complete all as specified and directed by Engineer-in-Charge.
Material and labour for coloured glazed ceramic tiles glossy finish of size 450x300x 5-6mm thick in dado’s/skirting etc (1st quality). set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and Shade, Colour including 10 mm thick cement motar CM 1:4 complete all as specified and directed by Engr in Charge complete all as specified.
Material and labour for 16 to 18mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and incl Screed bed or bedding layer of mortar 20mm thick in CM 1:6 and taking down old complete all as specified and directed.
Material and labour for for Machine cut kota stone slab flooring 18-20 mm thick over and incl 20 mm thick cement screed bad in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete including dismantling of old stone floor and PCC complete all as specified and directed.
Material and labour for 75mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.
Material and labour for providing water proofing treatment to sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface. (f) PCC 1:5:10 type E2 in sunken area complete all as specified and directed.
Supply and fixing pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and as directed.
Supply and fixing pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and as directed.
Material and labour for cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) filling in pressed steel chowkhats, bed block for holdfast and the like all as specified and as directed.
Supply and fixing 35mm thick second class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing 35 mm thick second class hard wood glazed and skelton shutters sizes of members as specified in SSR (Part-I) clause 8.24(a), open rebated and prepared to receive glass or gauge (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc all as specified and as directed.
Supply and fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube supplying, fixing in opening as per specification and drawing as in door / kitchen cabinet frame complete all as specified and as directed.
Supply and fixing 30 mm thick PVC factory made panel door shutter(style) consisting of frame made out of MS tubes for top & bottom rail, MS Frame shall be covered with heat moulded wood grain printed PVC channel and 5 mm thickX15 mm wide PVC Sheet beading used inside style and rails and decorative PVC beading of 10x10 mm used instead of exposed portion of PVC sheeet beading as in toilet/kitchen cabinate Shutters complete all as specified and as directed.Make Rajshree/Sintex or equivelent
Supply and fixing box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZ/TD-324/07 Sh 1/3 to 3/3 all as directed. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm Iron flat 200 mm long. (iii)10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint. (vi) Galvanized mild steel wire cloth power woven 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
Supply and fixing galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.
Description all as per Ser item No 44.00 here-in-before but figured glass, pin head type complete all as specified and as directed.
Supply and fixing galvanised iron tubing of 15mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed.
Supply and fixing galvanised iron tubing of 20mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed.
Supply and fixing in repair vitreous china squatting pan Orrissa pattern size 580x440 mm white with intrgal footb reat and P Or S trap and connection to flushing pipe anti-syphonage pipe etc complete all as specified and as directed.
Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and as directed.
Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 8 - 10 liters capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stain less steel with long bend of 32mm dia complete all as specified and as directed.
Supply and fixing in repair stainless steel kitchen plate rack made out of not less than 1mm thick stainless steel sheet of size 750mm x 600mm x 250mm of approved pattern complete all as specified and directed.
Supply and fixing in repair kitchen sink with drainage board made out of 1mm thick stainless steel sheet with plug washer, waste coupling, waste pipe including bedding in cement mortar, connection to union and drain pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fixing in repairs Bib taps, fancy type chromium plated ( long body) with crutch or butterfly handle,screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and directed.
Supply and fixing in repairs Stop cock, chromium plated fancy type screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and directed.
Supply and fixing in repairs Stop cock, chromium plated fancy type with long shank and cup (concealed type) screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore incl cutting walls and making good surfaces complete all as specified and directed. Note : Incl makig good of surface as existing incl tiling,color wash, distempering, plastering etc.
Supply and fixing in repairs chromium plated Pillar taps, with capstan heads, chromium plated, screwed down high pressure,of size 15mm dia bore complete all as specified and directed.
Supply and fixing in repair Looking mirror with PVC moulded frame and hard board back white colour of size 450x600mm complete all as specified and directed.
Supply and fixing in repair PVC connection 15mm bore and for 600 mm long with brass or PVC nuts and PVC washer complete all as specified and directed.
Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and directed.
Supply and fixing in repairs Chromium plated Tubular towel rail, 20mm dia D type 60cm long between flanges complete all as specified and directed.
Supply and fixing in repairs chromium plated shower rose with arm and n.less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and directed.
Supply and fixing in repair 100mm dia steel grating with or without hole complete all as specified and directed.
Supply and fixing soap dish in postion complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store complete all as specified and directed.(measured overall as fixed along the centre line over fittings and accessories).
Supply and fixing 75 mm borePVC (SWR) pipes single socketed in any length with rubber ring joints , bends ,Tees complete fixed to walls at any height complete all as specified and directed.
Supply and fixing 110 mm borePVC (SWR) pipes single socketed in any length with rubber ring joints , bends ,Tees complete fixed to walls at any height complete all as specified and directed.
Supply and fixing PVC (SWR) bends 110 mm radius complete all as specified and directed.
Supply and fixing 110 mm PVS(SWR) Junction single(T) equal /Unequal complete all as specified and directed.
Supply and fixing PVC (SWR) bends/shoes any radiusof 75 mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and directed.
Supply and fixing 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fixing nahani PVC (SWR) trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 nos GI tank nipple complete and all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, , screwed both ends for iron pipe complete all as specified and directed.
Supply and fixing in repairs Gun metal, globe or gate valve with iron wheel head, 15 mm bore, , screwed both ends for iron pipe complete all as specified and directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engr-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (e) Material and labour for cement concrete tiles 25 cm x 25 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors/terraces over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as specified and directed.
Supply and fixing aluminium anodised barrel tower bolts 150 mm size, and fixed complete all as specified and directed.
Supply and fixing 150 mm aluminium handle cast type complete all as specified and directed.
Supply and fixing in repairs,300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Supply and fixing in repair floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed.
Supply and fixing 100mm butt hinges medium weight cold rolled and fixed mild steel hinges complete all as specified and directed.
Material and labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
Material and labour for preparing pre-primed steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Dismantling Stone slabs laid dry and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified and as directed.
Material and labour 100mm thick PCC type D-2, 1:4:8 (40mm aggregate) in floor as sub base complete all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
Providing cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
ASHFAQ AHMED MANHAS
Bidder Name
ASHFAQ AHMED MANHAS
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .