Various Outer Development works for College Buildings of Yoga Ayurvedic and Naturopathy at Sikar (Excluding cost of Cement)

Boundry wall

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)(Excluding cost of cement)

Random Rubble stone masonry in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand)(Excluding cost of cement)

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. .M20 grade Nominal Mix/ Design Mix Providing M-25 grade R.C.C. instead of M-20 grade R.C.C.(Excluding cost of Cement)

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc..M20 grade Design Mix Providing M-25 grade R.C.C. instead of M-20 grade R.C.C.(Excluding cost of Cement)

Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level.

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Columns, pillars, posts and struts etc.

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : :Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam etc.

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code)

Brick Work with FPS bricks of class designation 75 in superstructure above plinth level upto floor five level in all shape and size :Cement mortar 1 : 6 (1 cement : 6 coarse sand) (Excluding cost of Cement)

Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification :(Excluding cost of Cement)

Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished :-20 mm thick (Excluding cost of Cement)

Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision Rollar Finish av. thickness 400 to 500 microns.

Internal Road work

Construction of embankment with approved material obtained from borrow pits with a lift upto1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300-1 and 300-2 with a lead upto 50m as per MoRTH Specification Clause 305.3

CARRIAGE OF MATERIALS -Earth, Sand ,line morrum, manure or sludge, The rates are inclusive of loading and unloading for 10 km

Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with notor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S. 2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete [MoRTH specification : Clause 401]. By Mechanical means.For Grading II Material

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. As per MORTH Specification Clause 601.

Providing and Laying of Interlocking M-30 grade Concrete Block Pavements as per drawings and IS 15658:2006. with all materials shall conform to MoRTH Specification Clause 602. Interlocking Concrete Block Pavements having thickness 80 mm.

Supply & fixing cement concrete precast Kerb or Dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing earth work, pointing & jointing with cement mortar 1:4 of size: 20 x 25 cm Including cost of M-15 Kerb/Dand complete

Parking Shade

Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm shets be casted with regular modified plyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and foe a minimum up to 12mts with all scaffolding.

Add extra for 0.60mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel sheet in place of 0.50mm thick

Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.

Hot finished welded type tubes

Add extra if square, rectangular hollow tubular sections are used.

Painting with enamel paint of approved brand and manufacture to give an even shade:

Wall Panelling

Providing and fixing of wall paneling on grid made out of PVC profile section of size 21x17mm with a wall thickness of 1.5mm+/-0.2mm,fixed on the existing wall with wood screw of size 50mm X 8mm with rowel plug at a spacing of 900mm center.uPVC profile section of size 150mm X 10mm with a wall thickness of 1.0mm+/-0.2mm to be fixed on the grid by self tapping screw of size 19mm X 6mm.Necessary cutouts for electrical connection to be provided at required places. The edge and periphery, finally to be covered by extruded PVC beading section of size 28mm X 12mm with a wall thickness of 1.0mm+/-0.2mm complete as per manufacture’s specification and direction of Engineer-in-charge.

Providing & Fixing in position "Optra Acoustical Wall Panelling with square edges made of fire glass substrate 25 mm thick and wrapped on the front side with an acoustically transparent and classified for fire reaction Class A, as per ASTM E-84, fabric with an option of colour- Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell as per the choice of the Architect of sized 600x1200 mm Providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel impelllers supplied by Armstrong Ceiling Solutions and construction adhesives as per the instructions laid done by the manufacturer.

Granite & Expanded Grill

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour)1501 Cm2 to 3600 Cm2 (Excluding cost of Cement)

Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)

Granite & Expanded Grill

3 seater fix seating arrangements This unit has to be mounted in a lecture theatre of step ladder type with each ladder of approx 1080mm. The units have to aligned at side by side with passage in between or as per layout approved by engineer in charge/ client. 3-seater desk size - Top : 1800W x 375 to 400D x 750H , Intermediate partition for storage : 1800W x 200D. The Desk top shall be made with 25mm thick ply with 1mm laminate of approved shade on both sides and 2mm thick edge taping of matching colour on all edges.There shall be MS perforated modesty panels of 1.2mm thick. Understructure consists of MS oval tube 70x30x2mm, rectangular pipe 75x30x2.5mm, 25x10x1.6mm, epoxy powder coated of 40-50 microns. All tube ends to be provided with high density caps. All corners to have 10mm radius. 3 seater seat size - 1800W x 350D x 450H. Seat shall be 18mm thick ply with 1mm laminate of approved shade on both sides and 2mm thick edge taping of matching colour on all edges and seat fixed to understructure with pop-up rivets. Understructure consists of MS oval tube 70x30x2mm , rectangular pipe 75x10x2.5mm , 25x10x1.6mm thk, 25x25x2mm, 55x35x2mm with base plate of 2mm thick sheet grouted on floor , epoxy powder coated of 40-50 microns. All tube ends to be provided with high density.