WBPWD/EE-II/KNHD/NIT-31e/25-26

Dismantling carefully terraced floor only (including floor finish if any) or lime terracing in ground floor roof and removing rubbish as directed within a lead of 75 m. In Ground Floor including roof. In 3rd floor

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. In ground floor including roof. In 4th floor

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. In 3rd floor

Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. In ground floor including roof.

Cutting chase upto 125 x 150 mm. and subsequent mending of damages. in brick wall [Cement-3.6 Kg/Mtr]

Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.

Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department]

Guniting concrete surface with cement mortar (25 mm nominal thick) applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification.

Brick work with 1st class bricks in composite mortar with cement, lime and sand (1:1:6) (1 cement:1 lime putty/paste:6 sand) In foundation and plinth In 3rd floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:6 cement mortar 20 mm thick plaster In ground floor

In 1st floor

In 2nd floor

In 3rd floor

With 1:4 cement mortar 15 mm thick plaster In ground floor

In 1st floor

In 2nd floor

In 3rd floor

In 4th floor

With 1:4 cement mortar 10 mm thick plaster In ground floor

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier] With approved concrete pump

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m Tor steel/Mild Steel SAIL/ TATA/RINL In 3rd floor

In 4th floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work In 3rd floor

In 4th floor

Extra for staging beyond 4 m in any floor (Mode of measurement: area in plan x mean height of staging upto soffit of shuttering above initial 4 m)

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Malayasian

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: 35mm thick shutters (single leaf)

Taking out shutter of door and window dismantling by parts (for repair or placement of damaged parts) reassembling and refitting and rehanging same with old fittings but with new screws as necessary.

Venetian shutters of doors and windows as per design with valves fixed to valve and rod with plated hooks including cost oi plated hooks and fitting, fixing shutters in position but excluding the cost of hinges and other fittings. 35mm thick shutters with 12mm thick valve. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 1st.Floor

In 2nd floor

In 3rd floor

Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. mm. Thick) fitted with putty bed and teak wood bead and nails ncluding fitting and fixing shutter in position but excluding the ost of hinges and other fittings, cost of glass, putty, wooded leads etc which will be paid seperately. n Ground floor 35mm thick shutters. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 1st.Floor

In 2nd floor

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) 4 mm thick

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. In 4th floor

Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fittedand fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm). 19mm mesh.

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)Water Proof

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) One Coat Solvent based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer): (Two coats) Standard Quality

Band moulding (horizontal or vertical) rectangular section,made with cement plaster (1:4) complete. Projection 40 mm in Ground Floor. Depth or width (125 mm to 150 mm] (Cement 2.6Kg/Mtr.) In ground floor

In 1st floor

In 2nd floor

In 3rd floor

Band moulding (horizontal or vertical) of rectangular section made with 15 mm thick cement plaster (1:4) on brick projection or concrete projection (excluding the cost of such brick or concrete projection). In ground floor. Projection upto 75 mm. Depth or width (75 mm to 150 mm) (Cement 2.46Kg/Mtr.) In ground floor

In 1st floor

In 2nd floor

In 3rd floor

In 4th floor

Renewing cornice(with mouldings but without floral o similar intricate patterns) including necessary masonry work and 15 mm. thick cement plaster(l:4) complete: In Ground Floor 15mm cement plaster (1:4) complete : Projection (175 to 225) mm. Depth (150 to 200) mm (Cement 8.0Kg/Mtr.) In ground floor

Depth (150 to 200) mm (Cement 8.0Kg/Mtr.) In 1st floor

In 2nd floor

In 3rd floor

In 4th floor

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. One coat on old surface. In ground floor

In 1st floor

In 2nd floor

In 3rd floor

In 4th floor

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat In ground floor

In 1st floor

In 2nd floor

In 3rd floor

In 4th floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Super Protective 100% Acrylic Emulsion. Two coats. In ground floor

In 1st floor

In 2nd floor

In 3rd floor

In 4th floor

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface: With super gloss (hi-gloss) Two coats (with any shade except white)

Renewing ornamental baluster (Balustrade) as per design including mending good all damages complete. With baluster of plain cement concrete with (1:1½:3) with stone chips(floral or intricate pattern of height not exceeding 1200 mm.)

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required jointing materials and two coats of painting with approved paint in any position above ground. For Exposed Work 15 mm Dia Light quality

25 mm Dia Light quality

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 25 mm

Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/1970 and 1729/1964 including lead caulked joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). 100 mm X 600 mm

Supplying, fitting & fixing H.C.I. bend without door conforming to I.S.S. including jointing complete and painting two coats to the exposed surfacewith approved paint complete. (Payment of Painting will however be paid(seperately). With valamoid joints including sealing the top with cement mortar (4:1) 100 mm dia.

Dismantling H.C.I, pipe with fittings including melting lead caulked joints. 100 mm

Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 / 1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe Ijne in fitted condition including specials,payment for specials & Painting will however be paid seperately). With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth. 150 mm dia. (internal)

100 mm dia.

Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/1970 including joining and painting two coats to theexposed surface with approved paint complete. (Payment of Painting will however be paid seperately). With valamoid joints including sealing the top with cement mortar (4:1) 150 mm dia.

100 mm dia.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 including labour charges Single Socketed 3 Meter Length 110 mm Dia

160 mm Dia

Fittings Plain Tee 110 mm

Door Tee 110 mm

Bend 45º 110 mm

Bend 87.5º 110 mm