Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹35.3 L+₹18,731.74 (0.53%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹37.2 L+₹2.1 L (5.92%)Rejected-Finance WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹37.4 L+₹2.3 L (6.50%)Rejected-Finance E 30 RAJIV NAGAR BEGUMPUR NEW DELHI 110086 | NEW DELHI | NEW DELHI | DELHI | 110086 | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹39.1 L+₹4.1 L (11.6%)Rejected-Finance | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cnatt-10
GE (Central) Delhi Cnatt-10
PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE B/R-I, AGE B/R-II AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10
2023_MES_601569_1
GE/C-19/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cnatt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cnatt-10
₹99,800
Yes
17 Jul 2023
6 Jun 2023
28 Jun 2023
6 Jun 2023
26 Jun 2023
20 Jun 2023
6 Jun 2023 - 20 Jun 2023
Amount
S&F for fe 410-w (Gde-E-250) Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.
S & F Pre-painted galvalume aluminum Zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Excavation in post holes (or similar holes) in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed by Engineer-in-Charge.
S&F powder coated ( 50 micron thick) aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified.
M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F 4mm thick pin headed glass (figured) panes used in anodised aluminium glazed/gauzed windows and ventilators shutters complete all as specified.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed stainless steel wire staple, complete all as specified.
Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on Aluminium Frame as per specifications and drawing.
Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers
M&L for plain Cement concrete1:3:6 type C2 (40mm graded aggregate) in foundations, filling and mass concrete
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.
M&L 25 mm thick PCC 1:2:4, type B-0 using 12.5mm graded crushed aggregates as in floor surface all as specified and directed.
M&L for polished Vitrified tile ultra charge , 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:6 complete all as specified .
M&L for joint less Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .
All as per item No 15 above but over 10mm thick rendering in CM 1:4 as in skirting all as directed.
S&F factory made solid PVC wire gauged door shutter 35mm (styles) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded prelaminated PVC C channel having a prelam PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and prelam PVC sheet for top, lock and bottom rail on either side and as gap insert for top rail and bottom rail. The wire gauge shall be stainless steel alloy wire cloth 0.36mm nominal dia of wire and average aparature 1mm, wrapped on an additional square 8mm MS solid tube and this tube shalll be welded to MS tube and wire gauge shall be stretched to tighten firmly complete all as specified and directed.
S & F factory made solid PVC moulded door shutter 35mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick prelam PVC sheet on back face complete all as specified and directed.
S&F stainless steel handle of size 200mm size long complete all as specified.
S&F 100 mm long (size) butt hinges, stainless steel with brass/bronze hinge pin, complete all as specified.
S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified.
S&F stainless steel barrel tower bolt 200 mm long extruded sections complete all as specified.
S&F stainless steel floor door stopper with hard drawn steel spring 140mm long complete all as specified.
M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.
M &L 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70 Kg per ltr, water ration 17 to 19 % by weight with compressive str as per IS 4031 part 6 applied as per the manufactore instr including necessaery cement screed and prepartion of surface to received ready mix plaster. Complete all as specified and directed by Engineer-in-Charge.
M&L for 10mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed compound complete.
Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint or equivalent over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.
M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete.
M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410-W (GdeE- 250) quality A all as specified and directed.
M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified.
M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth.
M & L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment set jointed and pointed in neat cement slurry in floors, and cut and polished.
M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 80mm thickness, M-40 Gde,Over and including 20mm thick layer of sand complete all as specified and directed.
Providing and fixing 9mm thick designer ceiling board in ceiling fixed with screws as per manufactures instructions (Make : Everest) laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be under coated white. The frame shall comprise of main runner made from 0.33mm thick galvanized steel sheet & size of 24x32x300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200 mm maximum centres. hangers of GI wire 4mm dia to be fixed by the approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with(double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300 mm long of white colour all as per instruction complete all as specified & directed.
Removing excavated soil materials n.exc 50m and depositing where directed at a level.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting loose /soft soil and getting out.
Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.
M&L Rendering 15 mm thick of CM 1:4 on fair faces of brick or concrete surfaces is to be finished even and smooth without using extra cement with mixing of water proofing compound complete all as directed.
M&L preparation of newly plastered surfaces of work and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed.
M&L for mild steel works as in angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including al necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S & F of Fe 410-W Gde -E- 250 quality (A) Mild steel in flat, round or square bars, in available lengths complete all as directed.
S&F Mild steel screw sbolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed ene to be fitted with washers and one hexagonal or square nut, exc 5cm long but n.exc 10cm long and dia of neck 11mm to 15mm complete all as specified and directed.
Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire .
Supply only Chain link MS galvanisd fencing, any size or type.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.
M& L PVC moulded cement concrete Chequered cement concrete colour tiles 30 cm x 30 cm x 25mm thick with mixture of grey cement & pigment set jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in C M 1:6 complete all as specified and as directed.
M&L forming 12mm thick Expansion joints in 100mm th concrete slab and filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘ complete all as specified and directed.
S & F Steel work in tubular hollow pipes( square, round,rectangular shape), for vertical posts , purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as specififed and dircted by Engr-in-Charge.
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with srew.
Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L Glazed ceramic coloured tiles (300x200mm) x 6-7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match such skriting /dado and risers to steps etc laid over and including bedding layer of 10mm thick in cement mortar 1:4 complete.
M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in multistorey building ,complete all as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level).
S&F PVC kitchen and cupboard frame of the size 75mmx40mm with a wall thickness of 4mm, made out of extruded 4mm thick prelam PVC sheet reinforced with 15mmx15mm MS tube of 19 gauge thickness througout the fame and mitre cut at two corners and jointed with 2 Nos of 150mm long brackets of 10mmx10mm MS tubes.The door frame shall be fixed to the wall using 65/100mm long MS screw through the frame by using PVC fastners . A minimum of 4 Nos. of screws to be provided for each vertical member and minimim 2 Nos for Horizontal members Complete all as per manufacturers specifications and as directed.
S&F WPC board, S&F 18mm thick single extruded WPC (Wood Polymer Composit) Solid Board having density not less than 600 kg/ Cbm one side white and other side of board laminated with PVC Foil including finishing all edges at all level for making edge lipping /beading or .. 50 mm thick PVC sheet lipping at all 4 edgesusing binding tape, Solvent, screws, stainless steel, Piano hinges / self closives box type hinges etc Manufactured by ISO 9001-2008 certified company.
S&F Stainless Steel plate rack (Gde-304)of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plate rack, complete all as specified.
S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.
S&F Modular Kitchen trolly/Basket cupboard and cabinate Confirming to Stainless steel of AE - SI grade 504 as per size Required for complete all as specified.
M&L for telescopy channels 22" long fixed in cupboard complete all as specified and as direct by Engineer in charge.
Supply & fixing 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20mm bore and fixed in position complete, all as specified & directed by Engineer-in-charge.
S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.
S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.
M&L MS round bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.
Taking down chowkats or frames exc. 1.5sqm but n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.
Taking down chowkats or frames exc 4 Sqm but not exc. 6 sqm each with shutters (without taking off shutters from frames ), complete all as specified.
Providing and fixing factory made uPVC any colour sliding window Three track of area n exc. 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm), Sliding sash (42mm x 67mm), Sliding mesh sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm).Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (30mm x 18) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware (Touch lock of zinc alloyed (any colour powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories). Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.
S&F pressed steel frames,size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. incl one coat of red oxide primer.
S & F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels,commercials type on both sides complete all as specified.
S&F factory made 35mm thick second class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I, section 8 clause 8.24(b)
M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfaces complete all as specified and directed.
S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved.
Dismantling floor, hearth or wall tiles including cement mortar concrete bedding amd removing rubbish off the premises complete all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide & n.exc 1.5 mtr deep in soft/loose soil and getting out.
M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping to wall complete all as specifed and as directed.
S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.
Removing of existing water proofing treatment of APP and removing of debris outside all as directed.
M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note: The application shall be executed on any type of surface and on horizontal/Vertical areas.
M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ Nerolac/STP Ltd. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
Disconnecting existing water tanks, setting aside (or lowering if required) for cleaning,repairing and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes and reconnecting and refixing in position for tanks capacity exc 500 and n.exc 1000 ltr complete all as specified.
M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed.
M&L for old decorated surfaces plastered or unplastered surface of wall complete removal of existing treatment brooming down , rubbing , scraping and washing with water etc and applying two coat of oil bond distemper over one coat of wall care putty on wall complete all a spcefied.
M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint up to 10 m height complete all as specified and directed.
Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed.
Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work.
M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-charge.
M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required including alu hinges 150 mm, alu handle 150 mm ,tower bolt 150 mm ,floor spring heavy duty "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.
S & F Steel window (Factory made) double rebate, guard bar flat and round with side hung, shutter incl hinges, tower bolt, steel handle and peg stay complete with glaze and gauge shutters (both are complete) devotailed or welded including making good to cutting holes with PCC 1:2:4 and complete finishing to cill and jamb corners with plaster and match all as specified.
S&F aluminium anodised barrel tower bolt extruded section 75 mm long and fixed with MS screws.
S&F 75 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.
S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with MS screws.
M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed using marble dust with admixture in CM (1:4) with pointing and white cement (1:2) of pigment to match with shade of granite all as spd.
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and finishing over 20 mm screed bed in CM 1:6 complete all as specified.
M&L Machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and finishing over 15 mm screed bed in CM 1:4 complete all as specified.
Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt.
S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection , sub base & flooring laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified.
S & F for Aluminium drapery Rod 25mm dia Powder Coated including wooden side caps, brackets, and rings @ 120mm c/c/ complete all as approved by Engineer-in-charge.
Dismantling tunframed timber scantlings 40sq cm and over in section in any position all as specified and directed.
M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified.
M&L for 50mm thick cement concrete type D-2 1:4:8 (40mm graded aggreate)in sub base, filling and mass concrete.
M&L for sand filling under floor or in foundations including watering and consolidation.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
Taking down old MCCB , TPN DBs , SPN DBs, sp mcb & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.
Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.
M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box suitable for modular switch ,socket etc boxes all as specified and as directed.
(a) One light /Ceiling fan/exhaust fan point controlled by one switch.
(b) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.
(c) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board
M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.00 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified
All as per item No 110 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15/16 A socket outlet point on independent board complete all as specified and directed by Engineer in charge.
M&L for Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed. Note:- (1) Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length. (2) The damaged surfaces to be made good with plastering will be carried out by contractor and cost of the same deem to be included in the quoted rates. Nothing extra in this account will be admissible.
M&L for Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed. Note:- (1) Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length. (2) The damaged surfaces to be made good with plastering will be carried out by contractor and cost of the same deem to be included in the quoted rates. Nothing extra in this account will be admissible.
M&L switch piano flush type 5 Amp SP one way
M&L switch piano flush type 15 Amp SP one way
M&L socket outlet 5 pin 5 Amp flush type
M&L socket outlet 2 in 1,3 pin 5/15 Amps
M&L ceiling rose 3 phase PVC polycorbonate,isolated body.
S & F electronic fan regulator 5 step connecting complete all as specified.
M& L angle lamp holder with metalic ring, pvc /polycarbonate type with black plate complete.
S & F led bulb 9 watt ,900 lumens output ,6500 k suitable B-22 base.
M&L for earthing of machinery/equipment/panel/installed at power house/subatation, complete with galvanised steel earth palte electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.5 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to connected to galvanised earth iron strip 25 x 4mm dia as a earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I )2009) and testing on completion all as specified and directed.
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection single door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
M&L MCB SPN 63 Amp "C " curve, 10 kA complete all as specified.
M&L MCB SPN 40 Amp "C " curve, 10 kA complete all as specified.
M&L MCB SP 6 to 32 Amp "C" curve ,10 kA. complete all as specified.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 105 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures..
Supply and fix in repairs LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete.
M& L in replacement decorative wall mountaning CITY-1 decorative wall light fixture made up of polycarbonate. Note : price of led bulb included wity city -I fitting.
Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary - is >100lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%,THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.
Supply and fixing ceiling fans against BER AC single phase 230/240 V of size 1200 mm sweep ,min air delivery 210 CFM with service value 6.0 BEE, 5 star rated BLDC fan including making connection with three core flexible, copper cable pvc insulated of suitable length and marking of fan no with black paint complete all as directed by Engr-in-Charge.
S&F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.
S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 60 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire.
S&F factory made epoxy powder coated switch disconnector fuse unit TPN with sheet metal enclosure confirming to IS 60947-3, 200Amps, positive isolation suitable for DIN & Bolted HRC fuse links fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts also incluiding one TPN-MCCB 125/160 Amp as incommer and 40 to 63 amp sp mcbs outgoing copmplete all as specified and directed by Engineer-in-Charge
S&F switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.
M&L for switch Modular type 16 Amps 1Way, 1 module with modular plate light marking 230V AC complete all as specified and directed by Engineer in charge.
M&L in replacement Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.
S&F Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.
STRATO 2x2 Ultra Slim recess mounted EdgeLit LED module with high brightness LED package and unique pattern acrylic de-glaring diffuser sheet for glare free uniform light distrubution suitable for armstrong/grid ceiling pannel light.
Supply and fix wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord (two) system complete all as specified and directed.
M&L for two coats of synthetic enamel paint on surface area n.exc 10sqcm on steel surface.
Schedule of Credit
a.k constructions
imran construction company
GIAN ENGINEERS
R S CONSTRUCTION CO.
ANSH VANSH CONSTRUCTION COMPANY
J S CONSTRUCTION CO
Ex Serviceman Enterprises
SHREE RAM BUILD TECH
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .