Construction of Joint Sub Registrar's residence along with toilets, new archives and boundary wall on the first floor of waiting room at District Registration Office, Nawada.

योजना एवं विकास विभाग

योजना का नाम :-

जिला निबंधन कार्यालय, नवादा में प्रतीक्षालय के प्रथम तल पर संयुक्त अवर निबंधक के वैश्म के साथ प्रसाधन, नये अभिलेखागार एवं चहारदीवारी का निर्माण ।

izkDdfyr jkf'k :- Rs. 4,50,37,00.00

विधानसभा :- नवादा

प्रखण्ड :- नवादा

dk;Zikyd vfHk;ark

LFkkuh; {ks= vfHk;a=.k संगठन

dk;Z izeaMy&01] नवादा

योजना का नाम:- जिला निबंधन कार्यालय, नवादा में प्रतीक्षालय के प्रथम तल पर संयुक्त अवर निबंधक के वैश्म के साथ प्रसाधन, नये अभिलेखागार एवं चहारदीवारी का निर्माण ।

izkDdfyr jkf'k:- Rs. 4,50,37,00.00

प्रस्तुत प्राक्कलन जिला अवर निबंधक, नवादा के पत्रांक-863/निo दिनांक –26/09/2025 के आलोक में एवं कार्यपालक अभियंता, स्था० क्षे० अभि० सं० कार्य प्र०-01 नवादा के आदेशानुसार स्थल निरीक्षण के उपरांत प्राक्कलन तैयार किया गया है।

प्रस्तुत प्राक्कलन में प्रतीक्षालय भवन के प्रथम तल पर Record Room-35'2'' x 28'4'', Waiting Hall-7'7'' x 17'10'', Entrance Lobby-9'9" x 13'9", Joint Sub-Registar Chamber-15'3" x 9'8", Joint Sub-Registar Rest Room-7'3" x 12'5" तथा Toilet-7'3" x 5'0" निर्माण का प्रावधान किया गया है। उक्त प्राक्कलन में Main building-Ceiling Height-11'0", Mumty Ceing ht-7'6" and Parapet ht-3'0" है।

उक्त प्राक्कलन में Brick Work with 100 A Brick in CM (1:6) in Super-structure, RCC (1:1.5:3), Roof treatment work, 6mm thick Ceiling plaster (1:4), 12 mm thick Inner wall Plaster (1: 6), 15 mm thick outer plaster (1:6) above Plinth, Vetrified Tiles flooring, Kota stone flooring, Ceramic Glazed wall & Floor Tiles, T-iron frame, MS sheet door & window, Local wood Chaukhat, Flush door shutter (Decorative Type), UPVC window, collapsible steel shutters, MS Grill, steel work build up Tubular Truss Railing, Upvc Rain water Pipe, white cement based putty (2mm thick) & Oil bound distemper with primer in inner surface, Finishing walls with Acrylic Smooth exterior paint in outer surface and ready mixed paint on steel Surface के साथ-साथ PHED work का भी प्रावधान है ।

उक्त प्राक्कलन में 75'0'' लम्बाई में 7'0" ऊंचा Barbed Wire के साथ चहारदीवारी,50 Nos Steel Rack के साथ-साथ Electrification Work का भी प्रावधान है ।

उक्त प्राक्कलन में सिविल कार्य भवन निर्माण विभाग (बिहार -सरकार ) के वर्तमान अनुसूचित दर जो दिनांक- 01-01-2022 से प्रभावी है, पर आधारित है । प्राक्कलन में 10% सामग्री का मालिकाना शुल्क जोड़ा गया हैं तथा साथ ही साथ 5.36% EXTRA GST शुल्क भी प्राक्कलन शुल्क जोड़ा गया है।

उक्त प्राक्कलन में विद्युतिकरण कार्य भवन निर्माण विभाग (बिहार -सरकार ) के वर्तमान अनुसूचित दर जो दिनांक-01-09-2023 से प्रभावी है, पर आधारित है ।

अतः प्राक्कलन की तकनीकी अनुमोदन तथा प्रशासनिक स्वीकृति अपेक्षित है, अग्रतर कारवाई हेतु कार्यालय को समर्पित किया जाता है।

duh; vfHk;ark] lgk;d vfHk;ark] कार्यपालक vfHk;ark

LFkk0{ks0vfHk0laxBu] LFkk0{ks0vfHk0laxBu] LFkk0{ks0vfHk0laxBu]

dk;Z izeaMy 01 नवादा dk;Z izeaMy 01 नवादा dk;Z izeaMy 01 नवादा

GENERAL ABSTRACT OF COST

योजना का नाम :- जिला निबंधन कार्यालय, नवादा में प्रतीक्षालय के प्रथम तल पर संयुक्त अवर निबंधक के वैश्म के साथ प्रसाधन, नये अभिलेखागार एवं चहारदीवारी का निर्माण ।

Sl. No. Particulars Amount (Rs)

1 Cost of civil work 2469727.00

2 60 Nos Iron Rack 1357850.00

3 Boundry Wall 210446.00

4 Add cost of sign Board 4000.00

5 Add cost of inaugration board 6000.00

6 Total Cost Rs. 4048023.00

7 Add extra GST -5.36% 216974.00

8 Total Cost Rs. 4264997.00

9 Electrification work 215642.00

10 Add Seignorage Fee 22985.00

11 Gross Total Cost Rs. 4,50,36,24.00

Junior Engineer Assitant Engineer Executive Enginner

LAEO WD-01 Nawada LAEO WD-01 Nawada LAEO WD-01 Nawada

योजना का नाम:- जिला निबंधन कार्यालय, नवादा में प्रतीक्षालय के प्रथम तल पर संयुक्त अवर निबंधक के वैश्म के साथ प्रसाधन, नये अभिलेखागार एवं चहारदीवारी का निर्माण ।

जिला नवादा प्रखण्ड नवादा विधानसभा नवादा

वित्तीय वर्ष 2025 -26 मद :-

S.NO S.O.R Items of work NO No L B H/D Qty Units Rate (Rs) Amount (Rs)

(Fit) (Fit) (Fit)

1 5.2.2 Providing and laying R C C (1:1.5:3 ) with Cement, Coarse Sand and Stone Chips in Clumn, Stiffner……..do all com job

1st Floor To Roof Stiffner-

Mumty Stiffner-

Parapet Stiffner-

Total = 338.72 Cft

2 5.3+ 5.33B.4 Providing and laying R C C (1:1.5:3 )with Cement, Coarse Sand and Stone in beams, suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases ……..do all comp job

1st Floor 0'10'' Lintel Length-

X-axis 2 x 56.92 = 113.83 Rft

X-axis 1 x 15.25 = 15.25 Rft

Y-axis 3 x 26.66 = 80.00 Rft

Y-axis 1 x 27.50 = 27.50 Rft

Total = 236.58 Rft

Qty of Lintel Band 1 x 236.58 x 0.83 x 0.50 = 98.18 Cft

1st Floor 0'5'' Lintel Length-

X-axis 1 x 7.25 = 7.25 Rft

Y-axis 1 x 17.00 = 17.00 Rft

Total = 24.25 Rft

Qty of Lintel Band 1 x 24.25 x 0.42 x 0.50 = 5.09 Cft

1st Floor Chajja -

1st Floor Beam & Roof -

Open Beam- 1 x 1 x 39.83 x 0.83 x 1.25 = 41.32 Cft

Open Beam- 2 x 1 x 25.50 x 0.83 x 1.25 = 52.91 Cft

Wall Beam- 1 x 1 x 31.83 x 0.83 x 0.50 = 13.21 Cft

1st Floor Roof slab- 1 x 1 x 63.75 x 31.00 x 0.42 = 830.03 Cft

Munty Beam & Roof -

Open Beam- 1 x 1 x 9.00 x 0.83 x 0.83 = 6.20 Cft

Mumty Wall Beam Length-

X-axis 2 x 9.00 = 18.00 Rft

Y-axis 2 x 13.75 = 27.50 Rft

Total = 45.50 Rft

Wall Beam Qty- 1 x 1 x 45.50 x 0.83 x 0.50 = 18.88 Cft

Mumty Roof slab- 1 x 1 x 11.75 x 16.50 x 0.42 = 81.43 Cft

Stair (1st Floor to Roof)-

Landing Beam 1 x 1 x 9.00 x 0.83 x 0.83 = 6.20 Cft

Waist Slab - 1 x 1 x 4.25 x 12.00 x 0.50 = 25.50 Cft

Landing Slab - 1 x 1 x 9.00 x 4.00 x 0.50 = 18.00 Cft

Waist Slab - 1 x 1 x 4.25 x 11.00 x 0.50 = 23.38 Cft

2nd Floor ppt band Length-

X-axis 1 x 47.92 = 47.91 Rft

X-axis 1 x 56.92 = 56.92 Rft

Y-axis 2 x 26.66 = 53.33 Rft

Total = 158.16 Rft

Qty of Ppt Band- 1 x 158.16 x 0.83 x 0.25 = 32.82 Cft

Total = 1395.58 Cft

3 5.22.7B Providing M.S rainforcement including cutting ,bending,binding and placing do…..do all com job

RCC Work for Stiffner vide item no (01) = 9.59 M3

RCC Work In for Lintel, beam, Roof, Chajja vide item no (02) 160.15 229.30 = 39.52 M3

4 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

(i) 5.9.3 Suspended floors, Roofs, landings, balconies and access platform.

1st Floor Roof slab- 1 x 63.75 x 31.00 = 1976.25 Sft

Open Beam- -1 x 1 x 39.83 x 0.83 = -33.06 Sft

Open Beam- -2 x 1 x 25.50 x 0.83 = -42.33 Sft

Stair Room -1 x 1 x 9.00 x 13.75 = -123.75 Sft

Mumty Roof Slab

Mumty Roof slab- 1 x 11.75 x 16.50 = 193.88 Sft

Open Beam- -1 x 1 x 9.00 x 0.83 = -7.47 Sft

Wall Beam- -1 x 1 x 45.50 x 0.83 = -37.77 Sft

Total = 1702.97 Sft

(iii) 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers.

Stair (1st Floor to Roof)-

Landing Beam 1 x 2 9.00 x 0.83 = 14.94 Sft

1st floor Lintel Band-

0'10'' wall Lintel Band- 1 x 2 236.58 x 0.50 = 236.58 Sft

0'5'' wall Lintel Band- 1 x 2 24.25 x 0.50 = 24.25 Sft

1st Floor Roof Beam-

Open Beam- 1 x 1 39.83 x 3.33 = 132.63 Sft

Open Beam- 2 x 1 25.50 x 3.33 = 169.83 Sft

Wall Beam- 2 x 1 236.58 x 0.50 = 236.58 Sft

Wall Beam- 2 x 1 31.83 x 0.50 = 31.83 Sft

Mumty Roof Beam-

Open Beam- 1 x 1 9.00 x 2.50 = 22.50 Sft

Wall Beam Qty- 2 x 1 45.50 x 0.50 = 45.50 Sft

D/Mumty 1 x 1 4.00 x 0.83 = 3.32 Sft

2nd Floor ppt band- 1 x 2 158.16 x 0.25 = 79.08 Sft

Total = 1050.79 Sft

(iv) 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts.

1st Floor To Roof Stiffner-

Mumty Stiffner-

Parapet Stiffner-

total = 796.79 Sft

(v) 5.9.7 Stairs,(excluding landings) except spiral-staircaces.

Stair (1st Floor to Roof)-

Waist Slab - 1 x 4.25 x 12.00 = 51.00 Sft

Landing Slab - 1 x 9.00 x 4.00 = 36.00 Sft

Waist Slab - 1 x 4.25 x 11.00 = 46.75 Sft

Total = 156.75 Sft

(vi) 5.9.16.1 Edges of slabs and breaks in floors and walis- Under 20 cms wide.

1st Floor Roof slab- 1 x 1 x 189.50 = 189.50 Rft

Mumty Roof slab- 1 x 1 x 56.50 = 56.50 Rft

Total = 246.00 Rft

(vi) 5.9.19 Weather shade,Chajjas, corbels etc. including edges

W Chajja - 6 x 1 5.00 x 1.50 = 45.00 Sft

D Chajja - 1 x 1 4.50 x 1.50 = 6.75 Sft

Total = 87.75 Sft

5 6.1.14A+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 : 6 (1 cement: 6 coarse sand ) in super structure …..do all com job

1st Floor Brick Work-

Deduction- 63.32

Mumty Brick Work-

Deduction- 63.32

2nd Floor ppt Brick Work-

Total = 2391.81 Cft

6 13.24.2 Providing 6 mm thick C.P. 1:4(1 cement: 4 coarse sand) in celling do …..do all com job

Record Room- 1 x 35.16 x 28.33 = 996.08 Sft

Enterance Lobby- 1 x 9.00 x 13.75 = 123.75 Sft

Stair Room- 1 x 9.00 x 13.75 = 123.75 Sft

Joint Sub-Registar Chamber- 1 x 15.25 x 9.66 = 147.32 Sft

J. Sub-Registar Rest Room- 1 x 7.25 x 12.42 = 90.05 Sft

Waiting Hall- 1 x 7.58 x 17.83 = 135.15 Sft

Toilet- 1 x 7.25 x 5.00 = 36.25 Sft

1st Floor Roof Fins- 1 x 189.50 x 0.50 = 94.75 Sft

Mumty Roof Fins- 1 x 56.50 x 0.50 = 28.25 Sft

W Chajja - 6 x 5.00 x 1.50 = 45.00 Sft

W1 Chajja - 6 x 4.00 x 1.50 = 36.00 Sft

D Chajja - 1 x 4.50 x 1.50 = 6.75 Sft

total = 1986.85 Sft

7 13.11.4 Providing 12 mm thick C.P. (1:6) in wall do…..do all com job

Enterance Lobby- 1 x 2 x( 9.00 x 13.75 )x 11.00 = 500.50 Sft 3 2 5 30

Joint Sub-Registar Chamber- 1 x 2 x( 15.25 x 9.66 )x 11.00 = 548.02 Sft 3 2 5 30

J. Sub-Registar Rest Room- 1 x 2 x( 7.25 x 12.42 )x 11.00 = 432.74 Sft 3 2 5 30

Total = 4188.06 Sft

8 13.12.4 Providing 15 mm thick C.P. (1:6) on rough side of wall do…..do all com job

2nd Floor Parapet- 1 x 2 x 158.16 x 3.00 = 948.96 Sft

Total = 3682.05 Sft

9 12.52.2 Grading roof for water proofing treatment with Cement concrete 1:2:4(1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Total = 316.20 Cft

10 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Total = 1723.25 Sft

11 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm

Joint Sub-Registar Chamber- 1 x 1 x 15.25 x 9.66 = 147.32 Sft

J. Sub-Registar Rest Room- 1 x 1 x 7.25 x 12.42 = 90.05 Sft

Waiting Hall- 1 x 1 x 7.58 x 17.83 = 135.15 Sft

Total = 381.03 Sft

12 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm.

Joint Sub-Registar Chamber- 1 x 1 x 42.82 x 0.50 = 21.41 Sft

J. Sub-Registar Rest Room- 1 x 1 x 32.84 x 0.50 = 16.42 Sft

Waiting Hall- 1 x 1 x 47.57 x 0.50 = 23.79 Sft

Total = 61.62 Sft

13 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand)

Record Room- 1 x 1 x 35.16 x 28.33 = 996.08 Sft

Enterance Lobby- 1 x 1 x 9.00 x 13.75 = 123.75 Sft

1st Floor Portico- 1 x 1 x 11.66 x 5.50 = 64.13 Sft

Stair Room/Op- 1 x 1 x 9.00 x 0.83 = 7.47 Sft

Stair Tread- 21 x 1 x 4.25 x 1.00 = 89.25 Sft

Stair Landing- 1 x 1 x 9.00 x 4.00 = 36.00 Sft

Total = 1324.57 Sft

14 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm

Record Room- 1 x 1 x 121.00 x 0.50 = 60.50 Sft

Enterance Lobby- 1 x 1 x 29.75 x 0.50 = 14.88 Sft

1st Floor Portico- 1 x 1 x 5.50 x 0.50 = 2.75 Sft

1st Floor to Roof Stair-

Stair Riser- 23 x 1 x 4.25 x 0.50 = 48.88 Sft

Landing Skrting- 1 x 1 x 17.00 x 0.50 = 8.50 Sft

Stair Skrting- 21 x 1 x 1.00 x 0.50 = 10.50 Sft

Total = 146.01 Sft

15 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete.

Toilet- 1 x 1 x 7.25 x 5.00 = 36.25 Sft

Total = 36.25 Sft

16 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Total = 150.50 Sft

17 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Total = 173.00 Sft

18 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer.

Total = 42.00 Sft

19 10.14.1 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

D/Mumty 1 x 18.00 = 18.00 Rft

Total = 102.00 Sft

20 10.5.2 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece.

D/Mumty 1 x 4.00 x 7.00 = 28.00 Sft

Total = 100.00 Sft

21 9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Local wood

Total = 5.75 Cft

22 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 24.00 Each 130.80 Rs.3139.00

23 9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirh necessary screws.

Total = 96.25 Sft

24 9.147D.2 Providing and fixing factory made uPVC white colour sliding glazed window. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Total = 101.00 Sft

25 9.141 Providing and fixing pvc door frame of size 50x47 mm with wall do ...do all com job

Total = 17.00 RFT

26 9.142.1 Providing and fixing factory made panel pvc shutter 35 mm thick per laminated pvc door shutter do.......do all com job

Total = 21.00 Sft

27 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Stair Railing 1 x 24.00 x 3.00 = 72.00 Sft

Portico Railing 1 x 20.00 x 3.00 = 60.00 Sft

Total = 132.00 Sft

28 9.62.2 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm 4.00 Each 154.40 Rs.618.00

29 9.63.3 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 150x10 mm 4.00 Each 48.40 Rs.194.00

30 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm 8.00 Each 57.10 Rs.457.00

31 9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. 4.00 Each 108.10 Rs.432.00

32 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 4.00 Each 979.50 Rs.3918.00

33 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 12.00 Each 165.40 Rs.1985.00

34 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 42.00 meter 257.50 Rs.10815.00

35 12.79.4.2 Providing and fixing on wall face unplasticised -PVC molded fittings/ accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single tee without door-110x110x110 mm 4.00 Each 190.70 Rs.763.00

36 12.79.5.2 Providing and fixing on wall face unplasticised -PVC molded fittings/ accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm bend 6.00 Each 132.00 Rs.792.00

37 17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including ntegrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 1.00 Each 14663.50 Rs.14664.00

38 17.5.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass lush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 1.00 Each 6469.00 Rs.6469.00

39 17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. 1.00 Each 2369.90 Rs.2370.00

40 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm 1.00 Each 857.00 Rs.857.00

41 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

42 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc

43 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore 2.00 Each 715.10 Rs.1430.00

44 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 1.00 Each 594.80 Rs.595.00

45 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893 : 15 mm nominal bore 2.00 Each 500.40 Rs.1001.00

46 18.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 1.00 Each 424.00 Rs.424.00

47 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. 1.00 Each 96.80 Rs.97.00

48 18.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. 1.00 Each 45.20 Rs.45.00

49 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

vide item no (06) = 184.65 M2

vide item no (07) = 389.22 M2

vide item no (12) = -5.73 M2

vide item no (14) = -13.57 M2

vide item no (16) = -13.99 M2

50 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade. New work (two or more coats ) over and including priming coat with cement primer

vide item no (49) = 540.58 M2

51 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

vide item no (08) = 342.20 M2

52 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats)

vide item no (17) (A) 16.08 M2 x @ 1.00 times 16.08 M2

vide item no (18) 3.90 M2 x @ 2.00 times 7.80 M2

vide item no (20) 9.29 M2 x @ 2.25 times 20.90 M2

vide item no (27) (A) 12.27 M2 x @ 1.00 times 12.27 M2

Materials statements

S.NO ITEMS Qty Units C.sand S.chips Bricks L.sand Cement

1 Local sand 0 M3 x x x 0 x

11 20mm CP(1:4) in Floor Tiles 161.88 M2 3.88 x x x 1.38

12 12mm CP(1:3) in Wall Tiles 33.29 M2 0.51 x x x 0.24

53 Add carriage cost of materials

(ii)Local sand 0.00 M3 316.34 Rs.0.00

(iii)Coarse Sand 64.06 M3 461.14 Rs.29541.00

(IV)Stone chips 49.71 M3 1391.97 Rs.69195.00

Total Rs.2469727.00

54 Add cost of S.fee 10% of materials

(ii)Local sand 0.00 M3 14.18 Rs.0.00

S.F. Total Rs.20320.00

Junior Engineer Assistant Engineer Executive Engineer

LAEO WD-01 Nawada LAEO WD-01 Nawada LAEO WD-01 Nawada

योजना का नाम:- जिला निबंधन कार्यालय, नवादा में प्रतीक्षालय के प्रथम तल पर संयुक्त अवर निबंधक के वैश्म के साथ प्रसाधन, नये अभिलेखागार एवं चहारदीवारी का निर्माण ।

Detailed Estimate for construction of Boundry Wall along with barbed wire (Length-75'-0'')

जिला नवादा प्रखण्ड नवादा विधानसभा नवादा

वित्तीय वर्ष 2025 -26 मद :-

S.NO S.O.R Items of work NO No L B H/D Qty Units Rate (Rs) Amount (Rs)

(Fit) (Fit) (Fit)

1 20.2.1 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 300 mm dia piles

Total = 100.00 Rft

2 2.8.1 Earth work excavation in foundation trenches do….do all com job

250 mm GB wall QTY 1 x 66.75 x 0.83 x 0.50 = 27.70 Cft

Total = 27.70 Cft

3 2.28 Supplying & Filling local sand filling in foundation trenches do…..do all com job

250 mm GB wall QTY 1 x 66.75 x 0.83 x 0.25 = 13.85 Cft

Total = 13.85 Cft

4 11.72 Providing 100 A B/F/S with local sand do…….do all com job

250 mm GB wall QTY 1 x 66.75 x 0.83 = 55.40 Sft

Total = 55.40 Sft

5 5.1.2 Providing and laying R C C (1:1.5:3 ) with Cement, Coarse Sand and Stone Chips all work upto Plinth level do ……..do all com job 20.66

250 mm GB wall QTY 1 x 66.75 x 0.83 x 0.83 = 45.98 Cft

Total = 45.98 Cft 20.66

6 6.1.14A+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 : 6 (1 cement: 6 coarse sand ) in super structure …..do all com job

250 mm GB wall QTY 1 x 66.75 x 0.83 x 5.83 = 323.00 Cft

Total 323.00 Cft

7 5.2.2 Providing and laying R C C (1:1.5:3 ) with Cement, Coarse Sand and Stone Chips in Clumn, Stiffner……..do all com job

EGL to Top Stiffner- 10 x 0.83 x 0.83 x 7.00 = 48.22 Cft

Total = 48.22 Cft

8 5.3+ 5.33B.4 Providing and laying R C C (1:1.5:3 )with Cement, Coarse Sand and Stone in beams, suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases ……..do all comp job

Total = 18.28 Cft

9 5.22.7B Providing M.S rainforcement including cutting ,bending,binding and placing do…..do all com job

RCC Work upto Plinth Level vide item no (05) = 1.30 M3

RCC Work for Column vide item no (07) = 1.37 M3

RCC Work In for Lintel, beam, Roof, Chajja vide item no (08) = 0.52 M3

Total = 5.34 M3

10 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

(i) 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers.

250 mm thick Wall 1 x 2 x 66.75 x 0.83 = 110.81 Sft

0'4'' thick Top Band- 1 x 2 66.75 x 0.33 = 44.06 Sft

Total = 154.87 Sft

(ii) 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts.

EGL to Top Stiffner- 10 x 1 X( 0.83 x 0.83 ) X 7.00 = 116.20 Sft

total = 116.20 Sft

11 13.11.4 Providing 12 mm thick C.P. (1:6) in wall do…..do all com job

B/Wall Side 1 x 1 x 75.00 x 7.00 = 525.00 Sft

Total = 525.00 Sft

12 13.12.4 Providing 15 mm thick C.P. (1:6) on rough side of wall do…..do all com job

B/Wall Side 1 x 1 x 75.00 x 7.00 = 525.00 Sft

B/Wall Top 1 x 1 x 75.00 x 0.83 = 62.25 Sft

Total = 587.25 Sft

13 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Angle For Barbed Wire (40mmx40mmx5mm) 10 x 5.00 = 50.00 Rft

Total = 50.00 Rft

14 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats)

vide item no (13) 15.24 M x @ 0.17 times 2.59 M2

15 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface:Cement primer

vide item no (11) = 48.79 M2

vide item no (12) = 54.58 M2

16 13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade: New work (three or more coats).

vide item no (11) = 48.79 M2

vide item no (12) = 54.58 M2

17 M-1029 +12%GST +15%CP +1%LC Pro & Fixing Galvanised steeL barbed wire

Barbed Wire (6 Row) 8 x 75.00 = 600.00 Rft

Total = 600.00 Rft

18 10.33.4 Labour for fitting and fixing barbed wire fencing in six rows horizontal up to a height of 1.85m and two diagonals including fixing of post in cement concrete at 2.5m centres including cost of staples (but excluding the cost of cement concrete, angle, iron post, its cutting and making holes, nuts & bolts) all complete as per building specification and direction of E/l.

Barbed Wire (6 Row) 1 x 1 x 75.00 = 75.00 Rft

Total = 75.00 Rft

Materials statements

S.NO ITEMS Qty Units C.sand S.chips Bricks L.sand Cement

1 Local sand 0.39 M3 x x x 0.39 x

19 Add carriage cost of materials

(ii)Local sand 0.47 M3 316.34 Rs.149.00

(iii)Coarse Sand 6.47 M3 461.14 Rs.2984.00

(IV)Stone chips 4.54 M3 1391.97 Rs.6320.00

Total Rs.210446.00

20 Add cost of S.fee 10% om materials

(ii)Local sand 0.47 M3 14.18 Rs.7.00

(iii)C .sand 6.47 M3 17.58 Rs.114.00

(IV)S.chips 4.54 M3 59.54 Rs.270.00

S.F. Total Rs.2665.00

Junior Engineer Assistant Engineer Executive Engineer

LAEO WD-01 Nawada LAEO WD-01 Nawada LAEO WD-01 Nawada

BOQ(BILL OF QUANTITIES)

जिला निबंधन कार्यालय, नवादा में प्रतीक्षालय के प्रथम तल पर संयुक्त अवर निबंधक के वैश्म के साथ प्रसाधन, नये अभिलेखागार एवं चहारदीवारी का निर्माण ।

COST OF B.O.Q AMOUNT RS. 4503650.00

COST OF B.O.Q RS. 5000.00

EARNEST MONEY RS. 90100.00

TIME OF COMPLETION 6 MONTHS

S.No DESCRIPTION UNIT QTY. Rate(Rs) AMOUNT(Rs)

1 20.2 Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

2 2.8.1 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Cum 0.78 360.70 281.00

3 2.28 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. cum 0.39 287.30 112.00

4 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work puto plinth level; 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) cum 1.30 4688.30 6095.00

5 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) Cum 10.96 5670.00 62143.00

6 5.3+ 5.33B.4 Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in the existing metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc' as required. cum 40.04 5719.70 229017.00

7 5.9 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.

(ii) 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 158.27 437.50 69243.00

(iii) 5.9.7 Stairs,(excluding landings) except spiral-staircaces. sqm 14.57 439.90 6409.00

(iv) 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 112.05 404.70 45347.00

(v) 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 84.85 494.40 41950.00

(vi) 5.9.16 Edges of slabs and breaks in floors and walls.

5.9.16.1 Under 20cm wide Metre 75.00 130.20 9765.00

(vii) 5.9.19 Weather shade, Chajjas, corbels, etc. including edges. sqm 8.16 550.90 4495.00

8 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia Kg 6427.20 92.60 595159.00

9 6.1.14A+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 : 6 (1 cement: 6 coarse sand ) in super structure …..do all com job cum 76.88 5662.10 435302.00

10 9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Local wood cum 0.16 54628.90 8905.00

11 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Each 24.00 130.80 3139.00

12 9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges with necessary screws. sqm 8.95 2578.00 23073.00

13 9.147D.2 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). sqm 9.39 9471.00 88933.00

14 9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws,the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge m 5.18 433.40 2245.00

15 9.142.1 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm,out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel,all complete as per manufacturer’s specification and direction of Engineer-in-charge. sqm 1.95 3305.50 6446.00

16 9.62.2 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm Each 4.00 154.40 618.00

17 9.63.3 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 150x10 mm Each 4.00 48.40 194.00

18 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm Each 8.00 57.10 457.00

19 9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. Each 4.00 108.10 432.00

20 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Each 4.00 979.50 3918.00

21 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 257.28 144.50 37177.00

22 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. sqm 3.90 6303.40 24583.00

23 10.5.2 Providing and fixing 1 mm thicks M.S sheet door with frame of 40x40x6mm angal iron and 3mm M.S gusset plates at the junction and corners. All necessary fittings completejncluding applying a priming coat of approved primer using flats 30x6mm for diagonal braces and central cross piece. sqm 9.29 3467.90 32217.00

24 10.14.1 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). kg 108.85 110.40 12017.00

25 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. Kg 10845.16 123.90 1343715.00

26 10.18 Providing and fixing circular cast iron box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one ;pcf at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 12.00 165.40 1985.00

27 M-1029 +12%GST +15%CP +1%LC Pro & Fixing Galvanised steeL barbed wire Kg 30.00 71.55 2147.00

28 10.33.4 Labour for fitting and fixing barbed wire fencing in six rows horizontal up to a height of 1.85m and two diagonals including fixing of post in cement concrete at 2.5m centres including cost of staples (but excluding the cost of cement concrete, angle, iron post, its cutting and making holes, nuts & bolts) all complete as per building specification and direction of E/l. m 22.87 74.60 1706.00

29 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 13.99 795.00 11122.00

30 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm sqm 35.41 1638.80 58030.00

31 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. sqm 5.73 1191.80 6829.00

32 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand) sqm 123.10 1252.70 154207.00

33 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm sqm 13.57 1334.90 18115.00

34 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. sqm 3.37 686.80 2315.00

35 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. sqm 5.15 283.30 1459.00

36 12.52.2 Grading roof for water proofing treatment with Cement concrete 1:2:4(1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cum 8.95 3932.20 35193.00

37 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter m 42.00 257.50 10815.00

38 12.79.4.2 Providing and fixing on wall face unplasticised -PVC molded fittings/ accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single tee without door-110x110x110 mm Each 4.00 190.70 763.00

39 12.79.5.2 Providing and fixing on wall face unplasticised -PVC molded fittings/ accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm bend Each 6.00 132.00 792.00

39 13.11 12mm cement plaster of mix:

13.11.4 1:6(1 cement: 6 coarse sand) sqm 438.01 141.50 61978.00

40 13.12 15mm cement plaster on the rough side of single or half brick wall of mix:

13.12.4 1:6(1 cement: 6 course sand) sqm 396.78 162.80 64596.00

41 13.24 6mm cement plaster to ceiling of mix:

42 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall. sqm 160.15 229.30 36722.00

43 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 342.20 137.00 46881.00

44 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade. New work (two or more coats ) over and including priming coat with cement primer sqm 540.58 102.30 55301.00

45 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 540.58 105.40 56977.00

46 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) sqm 697.64 83.50 58253.00

47 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface:Cement primer sqm 103.37 38.60 3990.00

48 13.79 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

13.79.1 New work (three or more coats) sqm 103.37 81.20 8394.00

49 17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including ntegrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Each 1.00 14663.50 14664.00

50 17.5.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass lush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Each 1.00 6469.00 6469.00

51 17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. Each 1.00 2369.90 2370.00

52 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm Each 1.00 857.00 857.00

53 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

18.7.3 25 mm nominal outer dia Pipes m 25.00 317.30 7933.00

54 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc

18.8.1 15 mm nominal outer dia Pipes m 7.60 278.20 2114.00

55 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore Each 2.00 715.10 1430.00

56 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore Each 1.00 594.80 595.00

57 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893 : 15 mm nominal bore Each 2.00 500.40 1001.00

58 18.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms Each 1.00 424.00 424.00

59 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. Each 1.00 96.80 97.00

60 18.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 1.00 45.20 45.00

61 Providing & Fixing of Sign Board Each 1.00 4000.00 4000.00

62 Providing & Fixing of Inauguration Board Each 1.00 6000.00 6000.00

63 Carriage of Materials:-

(ii) Coarse sand 10 km (P ) Cum 70.53 461.14 32524.00

(iii) Stone chips - Cum 54.25 1391.97 75515.00

(iv) Local Sand - 3 KM( Lead 1K+2P) Cum 0.47 316.33 149.00

ELECTRIFICATION WORK

65 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

66 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Point 7 414.00 2898.00

67 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Point 6 531.00 3186.00

68 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. Meter 90 309.00 27810.00

69 1.55 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. Each 7 632.00 4424.00

70 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 105 201.00 21105.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 70 246.00 17220.00

1.7.11 4 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire Meter 20 660.00 13200.00

71 2.1 Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in the existing metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc' as required.

72 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.

73 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

74 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.9.2 6 way ( 4 + 18 ), Double door, horizontal type Each 1 5,132.00 5,132.00

75 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 A to 32 A, Single pole Each 18 237.00 4,266.00

76 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 19 64.00 1216.00

77 1.34 Supplying and fixing batten / angle holder including connections with 1.5 sq.mm FR PVC insulated, copper conductor single core cable etc. as required. Each 8 80.00 640.00

78 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.6 15 watt LED lamp Each 8 250.00 2,000.00

79 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. Each 6 521.00 3126.00

80 5.14 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required.

81 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. Each 2 1,038.00 2,076.00

82 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. Each 6 358.00 2,148.00

83 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 6 2,482.00 14,892.00

84 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

85 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. Set 1 13,271.00 13,271.00

86 3.17 Providing and fixing 4mm dia copper wire on surface or in recess for loop earthing etc as required. Meter 20.00 144.00 2880.00 215642.00

87 Add S.F (10%)

(i) Bricks -8 KM(local lead 1K+7P) %0 nos 38145.00 485.20 18508.00

(ii) Coarse sand 10 km (P ) Cum 70.53 17.58 1240.00

(iii) Stone chips - Cum 54.25 59.53 3230.00

(iv) Local Sand - 3 KM( Lead 1K+2P) Cum 0.47 14.19 7.00

Total (Rs.) 4503650.00

Junior Engineer Assistant Engineer Executive Engineer

LAEO, WD-01,NAWADA LAEO, WD-01,NAWADA LAEO, WD-01,NAWADA

ANALYSIS OF RATE FOR CARRIAGE OF MATERIALS FROM SOURCE TO WORK SITE BY ROAD Warisleeganj - 90.00 KM Nawada - 67.00 KM

Pakiwarawn - 86.00 KM Hisua - KM

Block- Nawada Kasheechak - 100.00 KM Akbarpur KM

Kauaakol - 109.00 KM Narhat

Govindpur - 52.00 KM Rajauli

Roh - 75.00 KM Meskaur

Sl.No. Materials Source Surfaced Road Lead Kutcha Road Lead Cost of Loading & Unloading Unit Per Trip Truck Capacity By Weight Per Trip Truck Capacity Multiplying Factor Per TripTruck Capacity (Net Payable Volume)

1 Stone Chips / Aggregate 54.00 1 195.10 Cu m 8.00 MT 5.40 cum 0.924 4.99 cum

2 Coarse Sand 9 1 195.10 Cu m 8.00 MT 5.40 cum 0.924 4.99 cum

3 Local Sand Local 2 1 195.10 Cu m 8.00 MT 5.40 cum 0.924 4.99 cum

4 Bricks Local 7 1 403.15 %0 Nos 8.00 MT 2000.00 Nos 1.000 2000 Nos

5 Cement Local 5 0 225.00 M T 8.00 MT 8.00 M T 1.000 8.00 M T

6 Steel Local 5 0 225.00 M T 8.00 MT 8.00 M T 1.000 8.00 M T

Haulage Rate Excluding Cost of Loading, Unloading & Stacking Unit : - Tonne.KM

I Surfaced Road 11.20

II Kutcha Road 27.20

Sl.No. Materials Haulage Cost Cost of Loading & Unloading Carriage Cost By Rail Total Carriage Cost

Surfaced Kutcha 9304119207

#REF! #REF! #REF! / #REF! x 27.20 x #REF! = #REF! #REF! / #REF! x 0.00 x #REF! = #REF! 195.10 0 ` #REF! #REF!

8 #REF! #REF! / #REF! x 27.20 x #REF! = #REF! #REF! / #REF! x 0.00 x #REF! = #REF! #REF! 0 R #REF!

9 #REF! #REF! / #REF! x 27.20 x #REF! = #REF! #REF! / #REF! x 0.00 x #REF! = #REF! #REF! 0 R #REF!

#REF! #REF! #REF! / #REF! x 27.20 x #REF! = #REF! #REF! / #REF! x 0.00 x #REF! = #REF! #REF! 0 R #REF!

#REF! #REF! #REF! / #REF! x 27.20 x #REF! = #REF! #REF! / #REF! x 0.00 x #REF! = #REF! #REF! 0 R #REF!

#REF! #REF! #REF! / #REF! x 27.20 x #REF! = #REF! #REF! / #REF! x 0.00 x #REF! = #REF! #REF! 0 R #REF!

Junior Engineer Asstt. Engineer Executive Engineer

LAEO WD-01 Nawada LAEO WD-01 Nawada LAEO WD-01 Nawada

योजना का नाम:- जिला निबंधन कार्यालय, नवादा में प्रतीक्षालय के प्रथम तल पर संयुक्त अवर निबंधक के वैश्म के साथ प्रसाधन, नये अभिलेखागार एवं चहारदीवारी का निर्माण ।

Detailed Estimate For Constriction of 01 No Iron Rack (07 Self in Each Rack-Size-1.80m x 0.45m x 0.40 m & Height-3.0 m)

जिला नवादा प्रखण्ड नवादा विधानसभा नवादा

वित्तीय वर्ष 2025 -26 मद :-

S.NO S.O.R Items of work NO No L B H/D Qty Units Rate (Rs) Amount (Rs)

1 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

4 Nos Foot (8 Gauge Thick) 1 x 4 x 0.15 x 0.15 = 0.09 Sqm

Total = 0.09 Sqm

Angle (50 x 50 X 5mm)-

Vertical Post - 1 x 4 x 3.00 = 12.00 m

Horizontal Post - 1 x 14 x 1.80 = 25.20 m

Horizontal Post - 1 x 14 x 0.45 = 6.30 m

Total = 43.50 m

7 Nos Rack (20 Gauge Thick) 1 x 7 x 1.80 x 0.45 = 5.67 Sqm

Total = 5.67 Sqm (i)

Total Weight (A+B+C)= = 210.59 KG 123.90 Rs.26092.00

2 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats).

vide item no (01) (i) 5.67 M2 x @ 2.25 times 12.76 M2

For 01 Rack Total Rs.27157.00

For 50 Rack Total Rs.1357850.00

Junior Engineer Assistant Engineer Executive Engineer

LAEO WD-01 Nawada LAEO WD-01 Nawada LAEO WD-01 Nawada

योजना का नाम:- जिला निबंधन कार्यालय, नवादा में प्रतीक्षालय के प्रथम तल पर संयुक्त अवर निबंधक के वैश्म के साथ प्रसाधन, नये अभिलेखागार एवं चहारदीवारी का निर्माण ।

Electrification Work

Shedule of Rates (Electrical-2023)-Dated-01/09/2023 Of BCD Bihar Note

SL.No. Code Particular Unit Qty Rate (Rs) Amount (Rs)

1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Button Holder Point 12

Tube Light Point 16

Ceiling Fan Point 12

Exhuast Fan Point 1

LED Street Light Point 2 Group-C For office

1.3.3 Group C Point 43 1,146.00 49,278.00 Group-B for Residential

2 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Each 7 414.00 2,898.00 for fan, tubelight, bulb,Exhaust fan cutout-assume-06 switch in a board

3 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Each 6 531.00 3,186.00 power socket-iron, heater

4 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. Metre 90 309.00 27,810.00 wire for power socket

5 1.55 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. Each 7 632.00 4,424.00 Socket for Mobile Charging

6 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

(i) 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 105 201.00 21,105.00

(ii) 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 70 246.00 17,220.00

(iii) 1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 20 660.00 13,200.00

7 2.1 Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in the existing metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc' as required. 0.00 Main Switch Disconnector

8 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required. 0.00 Main Chamber For power distribution

9 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.9.2 6 way ( 4 + 18 ), Double door, horizontal type Each 1 5,132.00 5,132.00 6 way ( 4 + 18 ) MCB

10 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 MCB

2.12.1 6 A to 32 A, Single pole Each 18 237.00 4,266.00

11 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 19 64.00 1,216.00 for new fan ceiling rose is included

12 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 8 80.00 640.00 Holder of bulb

13 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00

6.1.6 15 watt LED lamp Each 8 250.00 2,000.00 LED bulb

14 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. Each 6 521.00 3,126.00 Tube light

15 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00 Street Light

16 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. Each 2 1,038.00 2,076.00 Street light bracket

17 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. Each 6 358.00 2,148.00 Regulator for Ceiling Fan

18 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 6 2,482.00 14,892.00 Ceiling Fan

19 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00 Exhaust Fan

20 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. Set 1 13,271.00 13,271.00 Earthing

21 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. Meter 20 144.00 2,880.00 Wire For Earthing

Total Rs. 215,642.00

Junior Engineer Assitant Engineer Executive Enginner

LAEO WD-01 Nawada LAEO WD-01 Nawada LAEO WD-01 Nawada

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 7 414.00 2898

1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 6 531.00

Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 90 309.00

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 7 632.00

Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in the existing metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc' as required.

Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.

Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 6 521.00

Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.