752942A ALLIED WORKS OF 600 SEATING CAPACITY AUDITORIUM AT JABALPUR MIL STN

Item No. 01 : PET PANEL PANELING @ 8 FEET FROM FFL : Supply Installation Testing and Commissioning of Pet panels with acoustical properties made of 100 % polyster fibre with thickness of 9 mm homogenieous material with many color option as per the choice of the GE of size 2440 mm x 1220 mm. Can be cut in to any size for E G like 600 mm x 600 mm 1200 mm x 600 mm etc. as per client requirement. NRC Value of the eccoboard will 0.6. should be weather ressitant with anti fungal properties. Thermal insulation should be easy to install with the help of water proof bostik / fevicol SR 505 Adhesive. on the walls of the auditorium using GI frame work of 48mm GI Studs using 0.55mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing. The frame work to be filled with 50 mm thick micron having the density of 1000 GSM to achieve the 1.0 NRC value Then 8 mm perforated Boiling Water Proof, FR is Born Tough HDF Board density is above 1000 kg/m3 Borer Proof and Termite proof board will be nailed on G.I. frame. Finally 9mm thick pet panels will be paste on 8 mm perforated board with the help of S.R.

Item No. 02 : STRECHED FABRIC IN UPVC GRIPPER PANELING FROM 8 FEET TILL CEILING LVL Supply Installation Testing and Commissioning of Acoustical Panels on the side and back wall of the auditorium using GI frame of 48mm GI Studs using 0.55mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with GI angle 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing, 50 mm thick synthetic wool having the density of 1000 GSM to achieve the 1.0 NRC value, and chicken wire mesh support on the rear side abuting the wall face. Finally streched fabric will tucked into the gripper strips teeth and a tool stretch it tightly before fastening. this creates a smooth wrinkle free surface finish, using UPVC grippers fixed to 8 mm perforated Boiling Water Proof, FR is Born Tough HDF Board density is above 1000 kg/m3 Borer Proof and Termite proof board .

Item No. 03 : PET PANEL PANELING IN BETWEEN FABRIC PANELING Supply Installation Testing and Commissioning Pet panels with acoustical properties made of 100 % polyster fibre with thickness of 9 mm homogenieous material with so many color option as per the choice of the GE of size 2440 mm x 1220 mm. Can be cut in to any size for E G like 600 mm x 600 mm 1200 mm x 600 mm etc. as per client requirement.NRC Value of the eccoboard will 0.6. should be weather ressitant with anti fungal properties. Thermal insulation should be easy to install with the help of water proof bostik / fevicol SR 505 Adhesive on the side walls of the auditorium using GI frame work of 48mm GI Studs using 0.55mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing. The frame work to befilled with 50 mm thick micron insulation synthetic wool having the density of 1000 GSM to achieve the 1.0 NRC value Then 8 mm perforated board will be nailed on g.i frame.Finally 9mm thick pet panels will be pasted on 8 mm perforated Boiling Water Proof, FR is Born Tough HDF Board density is above 1000 kg/m3 Borer Proof and Termite proof board with the help of S.R

Item No. 04 : STAGE WALL PANELING Supply Installation Testing and Commissioning Pet panels on the stage walls using GI frame work of 48mm GI Studs using 0.55mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing. The frame work to befilled with 50 mm thick micron having the density of 1000 GSM to achieve the 1.0 NRC value Then 8 mm perforated biolo board will be nailed on g.i frame. Finally 9mm thick pet panels will be paste on 8 mm perforated Boiling Water Proof, FR is Born Tough HDF Board density is above 1000 kg/m3 Borer Proof and Termite proof board with the help of S.R

Item No. 05 : Supply Installation Testing and Commissioning of Pet panel ceiling with acoustical properties made of 100 % polyster fibre with thickness of 9 mm homogenieous material with so many color option as per the choice of the GE of size 2440 mm x 1220 mm. Can be cut in to any size for E G like 600 mm x 600 mm 1200 mm x 600 mm etc. as per client requirement.NRC Value of the pet panel will 0.6. should be weather ressitant with anti fungal properties. Thermal insulation should be easy to install with the help of water proof bostik / fevicol SR 505 Adhesive on the ceiling consisting of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending GI intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angles of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleats and steel expansion fasteners.

Item No. 06 : Supply Installation Testing and Commissioning STRETCHED FABRIC IN UPVC gripper panelling on ceiling of Acoustical Panels on ceiling consisting of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending GI intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angles of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleats and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in a direction perpendicular to the intermediate channel at 457mm c/c

Item No. 07 : Supply Installation Testing and Commissioning of STAGE GRID CEILING of Stage false ceiling of 9 mm polyster fiber board with homogenieous material with many color option as per the choice of the GE in charge of size 2440 mm x 1220 mm. Can be cut in to any size for E G like 600 mm x 600 mm 1200 mm x 600 mm etc. as per client requirement.NRC Value of the pet panel will 0.6. should be weather ressitant with anti fungal properties laid over MS Suspension Grid consisting of 2 nos 40 X 40X 5mm MS Angles, welded back to back @1200mm c/c & M.S. Tees @ 600mm c/c .

Item No. 08 : Installation Testing and Commissioning of PROCENIUM of MS structure & fixing of 9 mm pet panels on L-angle (40x40x5) will fixed outside the provenium, then will make frame 600 x 600 c to c with MS angle (50 x 25 x 5) at center then 12mm boiling water proof, FR is born tough HDF Board density is above 1000kg/m3 borer proof and termite proof board will nailed on the MS FRAME finally 9mm polyster fiber board with homogenieous meterial with many color option as per the choice of the GE of size 2440 mm x 1220mm. can be cut in to any size for E G like 600 mm x 600 mm 1200 mm x 600 mm etc. as per client requirement. NRC Value of the pet panel will 0.6 should be weather ressitant with anti fungal properties. Thermal insulation 9 mm pet panel will pasted on 12 mm board with the help of S.R.

Item No. 09 : Excavating / Digging out pits of suitable size (but dia not less than 400 mm and depth not less than 500 mm) each pit not exc 0.50 Cum in soft/loose of soil, manually or with using augar/pickxe including removing excavated soil to a distance not exc 50 m and making good the surfaces complete all as specified and directed.

Item No. 10 : Supply only approved each mixed with suitable as well as suffcient manure & chloropyriophos complete all as directed and specified.

(a) Rose

(b) Bougainvine cwarf mix colour hybrid

(c) Hibiscus

(d) Plumeria champa

(e) areca palm

(f) bottlel palm

(g) Foxtail palm

(h) Adanium palm

(a) Michelia champa 1.20 mtr minimum height

(b) Night bluming jasmine

(c) Ficus banjaminia

(d) Amal Tar

(e) Tabebuja Roses (savana oka)

(f) Tubebuia avelianedas (pink trumpet)

(g) Cassia fistula (golden shower tree)

(a) Mango 3 year agred (MIYAZAKI, RED PALMER, MALLIKA, ALPHANSO)

(b) Water Apply 3 year agred (dalhari, Bell chamba)

(c) Jamun 3 year agred

(d) Sapota (cricket ball)

(e) Guava 2 year agred (VNR, L49, Red diamond)

Item No. 14 : Supply & planting of shrubs/hedges in double row at desired distances of suitable shurbs like durantla, laisa and aclipha (Min height 25 cms) one the prepared formation around the peripheri of the area complete incl necessary trenching to plantation all as specified and directed. Note: (a) Rate for laying of approved earth in including in the items. (b) Rate for approved earth mixed with suitable manure will be measured & paid seperately.

Item No. 16 : Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia of pipe is 15 mm complete all as specified and directed.

Item No. 17 : Supply and Fixing of 20 mm GI tubes 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Item No. 18 : Supply and Fixing of 15 mm GI tubes 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Item No. 46 : S & F of BRASS Handle 600mm long, fancy type, of any colour (as approved by GE) heavy duty complete all as specified and directed.

Item No. 20 : S&F of Gun-metal, globe or gate vlaves, 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Item No. 21 : Supply Installation Testing and Commissioning of 3-Way Cinema Screen Speaker System has been specially developed as a cost effective solution for large and extra large cinemas. Frequency Response 45Hz to 20kHz Power Rating LF: 1600W AES, 6400W peak; MF: 150W AES, 1000W peak; HF: 80W AES, 450W peak. Sensitivity LF: 104dB @ 1W/1m; MF/HF: 118dB @ 1W/1. Dimensions (H x W x D) 1808 mm x 893 mm x 760 mm (71.1″ x 35.1″ x 30″). Net Weight 137 kg (302 lb).

Item No. 22 : Supply Installation Testing and Commissioning o

f 2 x 18” (450 mm) long throw weather resistant woofer. Front and rear loaded optimized SIC™ design, High power handling. Frequency Response 35Hz to 200Hz. Power Rating 2000W AES, 8000W peak. Sensitivity 101dB @ 1W/1m. Maximum SPL 134dB continuous, 140dB peak @ 1m. Nominal Impedance 4Ω. Dimensions (H x W x D) 552 mm x 1000 mm x 700 mm. Net Weight 80 kg (176 lb).

Item No. 23 : Supply Installation Testing and Commissioning of Cinema Surround Speaker System is specially designed for immersive sound playback in medium and large cinemas. Frequency Response 100Hz to 18kHz. Power Rating 250W AES, 750W peak. Sensitivity 102dB @ 1W/1m. Maximum SPL 126dB continuous, 132dB peak @ 1m. Nominal Impedance 8Ω. Dimensions (H x W x D) 470 mm x 380 mm x 279 mm. Net Weight 10 kg ( 22 lb).

Item No. 24 : Supply Installation Testing and Commissioning of active crossover designed to maximise the performance of cinema speaker systems. It has 4 balanced inputs and 7 balanced outputs for the left, centre and Right screen channels and one subwoofer channel in a 1U rack space chassis. 24dB/octave Linkwitz Riley configured with low noise OPAMPS and close tolerance components. The additional features include subsonic roll off, delays, CD horn EQ and screen loss equalisation. Externally accessible thumbwheel switches are provided for HF, LF and BM level settings.

Item No. 25 : Supply Installation Testing and Commissioning of four channel power amplifier designed and built for applications where sonic transparency and robust high power output capability are the prime criteria. No.Of Channels 4 Output Power(per channel) >4 x 480 Watts @ 8&Omega 4 x 820 Watts @ 4&Omega 2 x 1380 Watts @ 8Ω in bridge mode. Frequency Response 20Hz - 20kHz, +0/0.5dB.nput Power 1200 Watts. Dimentions 88 mm x 440 mm x 480 mm (3.47" x 17.3" x 18.9"). Net Weight 28.4kg (62.6 lb).

Item No. 26 : Supply Installation Testing and Commissioning of the isolation base, 2 two layer of 19 mm ply with MS support for speaker paltform for the main speaker as per drg.

Item No. 27 : Supply Installation Testing and Commissioning of 2-Way Passive Speaker consists of 2 x 12” low frequency driver in conjunction with 1.75″ voice coil high frequency driver of high sonic quality and dynamic range. 90° horizontal and 40° vertical pattern control horn exhibits uniform HF response throughout the cinema auditorium Frequency Response 50Hz to 20kHz, Power Rating 800W AES, 2400W peak Sensitivity 100dB @ 1W/1m, Maximum SPL 127dB continuous, 133dB peak @ 1m, Nominal Impedance 4ΩCrossover 1.2kHz Passive, low loss air core inductors and MKP capacitors Finish-Black impact resistant structured coating Enclosure 15 mm Birch Plywood direct radiator vented enclosure with mounting options, Grill Acoustically transparent perforated steel with foam backing complete with MS support accessories.

Item No. 28 : Supply Installation Testing and Commissioning of 2-Way Cinema Surround Speaker System,wall mounting with a 15° downward lt Frequency Response 60Hz to 20kHz Power Rating 400W AES, 1600W peak Sensitivity 97dB @ 1W/1m, Maximum SPL 123dB continuous, 129dB peak @1m Nominal Impedance 8Ω Low Frequency Driver 12" (308 mm) Low-Mid driver, High Frequency Driver 1.75" (44 mm) voice coil compression driver mounted on 90° x 40° horn, Crossover 1.3kHz Passive, low loss air core inductors and MKP capacitors, Dispersion 90° horizontal, 40° vertical Finish Black impact resistant structured coating Enclosure15 mm MDF direct radiator vented enclosure Grill Acoustically transparent black woven fabric with complete MS support accessories

Item No. 29 : Supply Installation Testing and Commissioning of high sensitivity, high power 8″ full range driver with well defined directivity Frequency Response 65Hz to 18kHz Power Rating 250W AES, 750W peak, Sensitivity 94dB @ 1W/1m, Maximum SPL 117dB continuous, 123dB peak @ 1m Nominal Impedance 8Ω, Transducers 8″ (200 mm) dual cone full range driver, Dispersion 90° conical Finish Black impact resistant structured coating Enclosure 15 mm MDF direct radiator vented enclosure Grill Acoustically transparent black woven fabric complete with MS support accessories.

Item No. 30 : Supply Installation Testing and Commissioning of surround subwoofer 18” driver is loaded in a direct radiator bass-reflex enclosure subwoofer. It has a 3” high temperature stabilized voice coil for high power handling and reduced power compression. The specially treat

ed cone is weather resistant and can withstand extremely severe climatic conditions. The large port area reduces turbulence at full power output and low frequencies. Frequency Response , 30Hz to 200Hz Power Rating 600W AES, 2400W peak, Sensitivity 98dB @ 1W/1m, Maximum SPL 125.5dB continuous, 131.5dB peak @ 1m, Nominal Impedance 8 Ω, Transducers 1 x 18″ (455 mm) long throw weather resistant woofer Finish Black impact resistant structured coating, Connector Push type binding post, cable upto 4 mm diameter, Enclosure 18 mm MDF direct radiator vented enclosure, Subsonic Filter 30Hz high pass 18dB/octave slope complete with MS support accessories

Item No. 31 : Supply Installation Testing and Commissioning of Speaker Cable – 4.0 Sqmm (128/0.20mm) x 2 core cable ATC copper conductor PVC insulated, core twisted, outer jacketed with Vasiform Type PVC Sheath.

Item No. 32 : Supply Installation Testing and Commissioning of Speaker Cable – 6.0 Sqmm (128/0.20mm) x 2 core cable ATC copper conductor PVC insulated, core twisted, outer jacketed with Vasiform Type PVC Sheath.

Item No. 34 : Supply Installation Testing and Commissioning of of 42 U Equipment rack to house all rack mountable equipment, with internal wiring, front glass door,heat dissipation fans,power distribution units etc.complete with standard accessories as required.

NOTE: ITEM No 21 to 34: Cost of bulk connectors such as XLR (Male & female), RJ-45, Speakon, Phono, Stereo Jack, velcro tape, cable ties etc shall be included while quoting. No extra cost will be provided.

Item No. 35 : Auditorium Mild Back Chair with cupholder and bolts 12 Main+ 88 add on Supply and placing auditorium chair size is : H: 1030mm W:550 mm D; 560mm with push back, PP armrest with cup holder. Common sharing handle between two seats. Construction seat & back understructure are made in moisture content shall be less than (10-12)%. Thicness of plywood used (mm) shall be 12mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative). framing are made in metal should be finishing with epoxy polyester black powder coated to the thickness of 50-60 microns (+/-5 micron) chair upholstered in standard high resilience polyurethane molded pu foam having density 40 +/-5 laminated with fabric - polyester. chair have common sharng arms made in plastic armrests shall be high impact injection molded polypropylene plastic in black colour with cupholder arms. full plastic seat shell formed to fit the contour of the body when in the sitting position. the multiple curves give the spectator long time support. The waterfall at the front of the cushion reduces pressure points. The seat bottom and seat-lifting mechanism is totally enclosed by an injection molded polypropylene plastic seat shell in black colour unique texture common sharing handle between two seats. Drgs – TP

Item No. 37 : Sofa set 04 Seater (02+02 Seater) Supply and

placing in Potision of 2 seater modernist classic desigh jesse sofa sku : jesse/2 size : 1320mm(I) x 860mm(d)x 830 mm (h), Material: premium leatherette / style : contemporary colour : green-advo green / finish : matte. Supplying and placing two seater exclusive premium leatherette modernist classic desigh louge seating sofa size is 1200mm (I) x 720mm (d)x 845mm(h) with solid wood framing makes it warp and scratch resistant, comfortable seat depth & height designed keeping modern indian lifestyle in mind, wrapped in buttery - soft premium leatherette / classic button-tufting, the panelled back and solid wooden armrests encourage lounging, designed with modernity & elegance, choose the option that suits your home. Combination construction structure are made in moisture content shall be less than (10-12)% thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative). structure frame shall be constructed from solid wood wooden framing is highly durable.

Contd... Item No. 37 : the seat & back structure shall be covered by p.u. foam fixed with adhesive glue, the frame shall be padded with high resilience polyurethane foam having 40 +/-5 density in seat 40mm thik, 40mm thick back foam having 40 +/-5 desity foam used, seat & back structure shall be covered with in green-advo green colour, it complements the modish legs are made by squre shape in solid wood material, (seat: 440mm (h), back height@ 470mm), The seller/ company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : GREEN PRO, indian design mark, AIOTA, FSC & SEDEX. The bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official link/screenshot of the product listing must be provided. Drgs – TP

Item No. 39 : Table Office Clk Steel: Overall size shall be 1200mm long, 410mm wide and 760mm wide and 440mm deep. The base shall be of 25 mm square tube of 1.6mm wide thickness. Legs shall be joined in short sides with 25mm square tube of wide thickness 1.6mm a long stiffener joining short stiffeners shall be provided the middle of short stiffeners. The top of legs shall be joined in short side with 25 mm square tube of wall thickness 1.6mm . on right side, when viewing the table, three drawers shall be provided of 110mm wide. the total height of drawers shall be 430mm and 440mm deep. the drawers shall be made of 1mm thick mild steel sheet. 25mm square mild steel tube 1.6mm wall thickness stiffeners shall be provided for the drawers. The drawers shall run smoothly over one another, the top of table shall be of 19mm thick MDF board commercial over which 1.5mm thick plastic aminated sheet shall be fixed. The standard PVC edging shall be provided to all round thedging of top of table PVC/hard rubber toes shall (FD– 381)

Item No. 40: Almirah Small Steel With Shelves : Dimension: Overall size shall be 1270mm high, 765mm wide and 440mm deep. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Specifications: Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welde at 50mm from each and of 765mm op, sides, back bottom and front of almirah shall be of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments will joints and welding, fixing shall be done according standard workmanship

Item No. 41 : Rack Steel (1830mm x 760mm x 1905mm) Overall size for two units shall be 1830mm long,

760mm wide and 1905mm high. Mild steel angle iron 30mm x 30mm x 3mm shall be used in ners and in middle for two units as vertical support. The rack shall be open from all sides. Mild steel shett 1.25mm thick shall be provided to helves (including top). all steel and iron surfaces exposed to view when placed in position shall be painted with two coats of anamen paint a coat of primer after preparation of surfaces as directed by engineer-in-charge. painting shall be done with spray machine. all as shown drawing and as directed. Drgs : FD- 129(M)

Item No. 47 : S & F of BRASS Hinges 125 mm, heavy duty complete all as specified and directed.

Item No. 43 : Recepticle PVC DIMENSION/CAPACITY: The recptacle shall be of capacity 40ltrs DESCRIPTION: The body of receptacle Pvc shall be made up of thick polymer plastic of thickness not less than 5mm, provided with swivel lid and steel handles on both sides as shown in drg. (FD/E6/MAP/13)

Item No. 44 : Lecture stand/Compodium overall size shall be 970mm wide and 1220mm high. Two upright of mild steel rectangular tube of 75mm x 25mm of 1202 mm high shall be provided in rear side and shall be 635mm apart. The two upright shall be joinded with bottom, middle and top rails with 75mmx50mm mild steel tube of wall thickness 1.6mm and shall be form the part of bottom rails and join the long side of bottom rail of size 785mm long, 75mm x 50mm mild steel tube of wall thickness 1.6mm The front base below bottom rails shall be of 785mm long and 125mm x 50mm mild steel tube of wall thickness 1.6mm and this shall be joined with rear uprights with sides of base which shall be 430mm long 125mmx50mm mild steel tube of wall thickness 1mm. Two support of angle iron shall be provided to the bottom rails owards sides of 150mm long over which 1.6mm thick mild steel foot rest shall be fixed. foot rest shall be 635mm long.

Contd...Item No. 44 :The two sides rails at top fixed and 170mm from buttom shall be 505mm long 75mm x 50mm mild steel tube of all thickness 1.6mm and shall form the part of top rails and jon the long side of top rails and join the long side of top rail of size 920 mm long 75mmx50mm mild steel tube of wall thickness 1.6mm sloping upright support shall be provided between top rails, middle rail and bottom rails in the front two corners. The sloping supports of 25mm square mild steel tube of wall thickness 1.6mm shall be welded to sloping upright in the front two corners. To sloping supports of 25mm square mild steel tube of wall thickness 1.6mm shall be welded to sloping upright Supports for making shell which shall have 12mm thick pre laminated MDF BOARD irrespective of what is shown of drawing.

Item No. 48 : S & F of BRASS Tower Bolt 450 mm long, complete all as specified and directed.

Item No. 60 : Supply Installation Testing and Commissioning of DMX cable 2 core ATC copper conductor, PE insulated, core twisted in a circular form, covered with special moisture -roof polymer, spiral shielded (97%) with ATC cooper, outer Jacketed with Matt finish High flex special PVC complete all as specified and directed.

Item No. 19 : S&F of bib taps dia 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Item No. 50 : Supply Installation Testing and Commissioning of 24x12 RGBW Light source : 24PCS 12W 4 IN 1 LEDs Lens angle : 25degree(30degree, 45degree, 60degree optional) Channel mode: 3 / 4 / 6/ 7/ 9DMX channel mode 0-100% linea

r dimmer Function : color mix, automatic color change, built – in program and strobe effect with adjustable speed sound controlled via built-in microphone adjustable sound sensitivity LED display, easy to control control : auto, sound active, DMX512, software (connect to computer) overheating protection voltage : 100-220V, 50/60hz Power : 300W.

Contd...Item No. 44 : Another horizontal shell 230 mm below the top shelf shall be provided by welding 25mm square mild steel tube of wall thickness 1.6mm over which 10mm thick pre-laminated MDF BOARD shall be fixed as shown on drawing front and sides of desk stand lecture shall be convered with 12mm thick pre laminated particleboard teak veneer shade. 18mm thick pre-laminated MDF BOARD teak veneer shade shall be provided at top . Horizontal top shall be 970mm 185mm and sides shall be 485mm x 110mm. Al edges of pre-laminated MDF BOARD remained exposed shall be covered with PVC edging as per the size of board edging. One tube light 600mm long and with proper electric connection concealed in such away the same is not visible from outside shall be provided as directed by Engineer-in-charge. all steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces. (FD-1022)

Item No. 51 : Supply Installation Testing and Commissioning of 400W LED Bilnder 3Q Degree complete with 3200K/5600K CCT 4x100W chip on board LED lamp source, DMX 512 dimming with 4/8 channel modes, black finish housing, IP20 protection having strobe option and smooth dimming, illuminate stage with uniform light intensity levels complete all as specified and directed.

Item No. 52 : Supply Installation Testing and Commissioning of professional lighting equipment uses the DMX protocol and network for comunication. The DMX spilter provides one DMX1 input and 10 output complete all as specified and as directed.

Item No. 54 : Supply Installation Testing and Commissioning of 25 x 50 mm MS pipe side ladder bar with MS pipe each side with black paint MS PIPE, Height of ladder should be 10 m. complete all as specified and directed.

Item No. 55 : Supply Installation Testing and Commissioning of DMX junction box with 3 pin XLR connector complete all as specified and directed.

Item No. 56 : Supply Installation Testing and Commissioning of 3 pin XLR connectors for stage lights complete all as specified and directed.

Item No. 57 : Supply Installation Testing and Commissioning of 40 OD M.S. Pipe to be ang from exiting grid / roof structure MS PIPE complete all as specified and directed.

Item No. 58 : Supply Installation Testing and Commissioning of stage light poit wiring from light points to MCS box wire 2.5 sq.mm 3 core PVC insulated and PVC sheathed cable including of suitable size 5/6 amps sockets withg box at top suitable MCBs and MCB box.electrical cable complete all as specified and directed.

Item No. 59 : Supply Installation Testing and Commissioning of MS Powder quoted C clamps for stage lights complete all as specified and directed.