Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Qualified |
| 2 | Accepted-Technical | Accepted-Technical Qualified |
| 3 | Accepted-Technical | Accepted-Technical Qualified |
| 4 | Accepted-Technical | Accepted-Technical Qualified |
| 5 | Rejected-Technical | Rejected-Technical Disqualified |
Tender Value
₹51.9 L
EMD Value
₹1.0 L
Closing Date
3 Aug 2026, 6:00 pmClosed
Executive Engineer
Watershed Development and Soil Conservation Department Rajsamand
Construction of recharge shaft, anicut (15 WORKS) MJSA 2 PHASE II Phase area rajsamand
2026_WDSC_576578_6
WDSC/Rajsamand/ENIT/04-12/232
Open Tender
Civil Works
Percentage
Rajsamand
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
SE Cum Project Manager, WCDC Watershed
₹1.0 L
Yes
20 Aug 2026
22 Jul 2026
4 Aug 2026
22 Jul 2026
3 Aug 2026
22 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | vkj-lh-lh- dk dqaos ds fy;s dZo rS;kj djuk rFkk dqosa esa cSBkukA | - | - | - | - |
| 2 | 1-5 ehVj O;kl ¼'kVfjax 2-30 oxZ ehVj½ ¼ RDPR BSR 2025 ITEM NO-171 C ½ | 84 | CURVE | 1 | ₹83.92 |
| 3 | vkj -lh-lh ds pDdj 5 lseh eksVh rFkk 38 lseh Åaph 1%2%4 lhesUV dzdhaV ls cUkkuk rFkk dq, esa fcBkuk] xksykbZ esa 6 feeh O;kl dh 3 NMs rFkk [kMh ckU/kus es 7-5 lseh dsUnz ls dsUnz dh nwj ckU/kdj QekZ cukuk lkfey gS] ckn esa ikuh jlus ds fy, Nhnz cukuk A | - | - | - | - |
| 4 | 1-5 ehVj O;kl ¼'kVfjax 3.69 oxZ ehVj½ ¼ RDPR BSR 2025 ITEM NO-172 C ½ | 84 | RING | 2,171.02 | ₹1,82,365.68 |
| 5 | Construction of tube well from ground level & up to 100 mtr depth to accommodate housing and assembly pipe of following sizes in all type of alluvium strata unconsolidated formation such as pebbles, boulders etc. by percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications, with gravel as per IS:4097-1967 and it's packing as per IS: 2800 (Part I & II) 1979 as amended up to date (the work includes the cost of gravel & it's primary packing and packing during development, lowering of housing & strainer assembly pipes with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly). The work would be completed after obtaining sand free water. revised BSR PHED 2023 Chapter No. 2 Item no.2.1.2 | - | - | - | - |
| 6 | N.B. 200 mm dia. | 1,120 | Mtr | 1,523 | ₹17,05,760 |
| 7 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m)revised BSR PHED 2023 Chapter No. 2 Item no.2.11.2 | 93.8 | Mtr | 2,734 | ₹2,56,449.2 |
| 8 | Labour charges for making slots on blank pipes made of ERW MS black pipe ISI marked of following sizes, the slotting should be as per IS:8110-1985. 200 mm dia nominal bore of 5.4mm thickness BSR PHED 2023 Chapter No. 2 Item no.2.12.3 | 35 | Mtr | 317 | ₹11,095 |
| 9 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. | - | - | - | - |
| 10 | 200 mm diaBSR PHED 2023 Chapter No. 2 Item no.2.23.3 | 14 | EACH | 986 | ₹13,804 |
stage.html
html • 0.03 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.59 MB
BOQ_1025095.xls
BOQ • 0.39 MB
ENIT04to12.pdf
Tender Documents • 0.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .