Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹25.3 LAccepted-AOC 50 CHAURASIS KUNJ PURANA QUILA LUCKNOW 226001 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226001 | 1 | Accepted-AOC Acceptance Of Tender | |
| 2 | 2₹25.9 L+₹31,760 (1.24%)Rejected-Finance | 2 | Rejected-Finance Not L1 | |
| 3 | 3₹26.5 L+₹84,746 (3.31%)Rejected-Finance | 3 | Rejected-Finance Not L1 | |
| 4 | 4₹30.7 L+₹5.1 L (19.8%)Rejected-Finance | 4 | Rejected-Finance Not L1 |
Tender Value
₹4 L
EMD Value
₹80,000
Closing Date
9 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE LUCKNOW
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
REPAIR TO ALL TYPE OF MISC FURNITURE UNDER GE (W) LUCKNOW
2024_MES_637239_1
CWE/LKO/W/T-108 OF 2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
LUCKNOW
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE West Lucknow
₹80,000
Yes
7 Mar 2024
12 Jan 2024
16 Feb 2024
12 Jan 2024
9 Feb 2024
26 Jan 2024
12 Jan 2024 - 26 Jan 2024
Amount
TABLE DINING 4'x2.5' GLASS TOP (FOR ITEMS SER NO 1.01 TO 1.08)
Taking out old unservicable top and Supply & Fixing Top of table 4'x2.5' x 10mm glass shall be made of brown/black as per direction of Engr-in-Charge
Taking down U/S legs and S&F new legs Stainless steel throuh out as per shape and size compelete all as specified and shown on drawing .
Same as item No. 1.02 but top long rail front or back complete all as spcified and as shown on drg.
Same as item No. 1.02 but top short rail for sides complete all as spcified and as shown on drg..
Same as item No. 1.02 but Transparent Glass Vacuum Suction Cup size 1.6x2.6x5.6Cm bacum top complete all as spcified and as shown on drg..
Same as item No. 1.02 but Buffers/Rubber Shoe complete all as spcified and as shown on drg.
Provision of Konia (GI Bracket) of size 3" x 3" x 3mm thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as spcified and as shown on drg.
Preparation of surface with sand paper after scrubbing and apply two coat of Paint Enamel to table including to the parts repaired/replaced under item No 1.02 to 1.07 to the required gloss to match with the existing complete all as spcified and as shown on drg.
TABLE CENTRE GLASS TOP 4'x2'x10MM (FOR ITEMS SER NO 2.01 TO 2.08).
Taking out old unservicable top of centre table and Supply & Fixing Top of centre table 4'x2' x 10mm glass shall be made of brown/black as per direction of Engr-in-Charge
Taking down U/S legs of table centre and S&F new legs Stainless steel/Brass throuh out as per shape and size of exit model compelete all as specified/Engr-in-Charge .
Same as item No. 2.02 but top long rail front or back of table centre complete all as per shape and size of exit model compelete all as specified/Engr-in-Charge .
Same as item No. 2.02 but top short rail for sides table centre complete all as per shape and size of exit model compelete all as specified/Engr-in-Charge .
Same as item No. 2.02 but Transparent Glass Vacuum Suction Cup size 1.6x2.6x5.6Cm bacum top complete all as spcified and as shown on drg.
Same as item No. 2.02 but Buffers/Rubber Shoe complete all as spcified and as shown on drg.
Provision of Konia (GI Bracket) of size 3" x 3" x 3mm thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as spcified and as shown on drg.
Preparation of surface with sand paper after scrubbing and apply two coat of Paint Enamel to table including to the parts repaired/replaced under item No 2.02 to 2.08 to the required gloss to match with the existing complete all as spcified and as shown on drg.
TABLE PEG GLASS TOP 1' x 1' x10MM (FOR ITEMS SER NO 3.01 TO 3.06)
Taking out old unservicable top of Table Peg and Supply & Fixing Top of table Peg 1'x1'x6mm glass shall be made of brown/black as per direction of Engr-in-Charge
Taking down U/S legs of table peg and S&F new legs of teak wood 1st class throughout as per shape and size exit compelete all as specified and shown on drawing .
Same as item No. 3.02 but top of table peg long rail front or back complete all as spcified and as shown on drg.
Same as item No. 3.02 but top of table peg short rail for sides complete all as spcified and as shown on drg..
Provision of Konia (GI Bracket) of size 1.5"x1.5" 3mm thick in between leg and short/long rail of the table peg fixed with screw to provide more strength complete all as spcified and as shown on drg.
Preparation of surface with sand paper after scrubbing and apply two coat of Paint Enamel to table including to the parts repaired/replaced under item No 3.02 to 3.05 to the required gloss to match with the existing complete all as spcified and as shown on drg.
CHAIR AUDITORIUM (FOR ITEMS SER NO 4.01 TO 4.06)
Taking down old U/S handle and S/F new handle made of Rema Chair complete all as directed by Engr-in-Charge.
Taking down old U/S holfast screw and S/F new holfast screw to fix chair auduitorium to floor complete all as directed by Engr-in-Charge.
Taking down old U/S push back system and S/F new push back system to fix chair auduitorium complete all as directed by Engr-in-Charge.
Taking down U/S Srl Number and S/F new Srl Number to fix chair auduitorium complete all as directed by Engr-in-Charge.
Taking down U/S Seat and S/F new Seat to fix chair auduitorium complete all as directed by Engr-in-Charge.
Taking down U/S Seat back and S/F new Seat back to fix chair auduitorium complete all as directed by Engr-in-Charge.
LOOP PILE SYNTHETIC CARPET 8 MM (FOR ITEMS SER NO 5.01 TO 5.01)
Taking out unsv Corpet and S&F new Loop Pile Synthetick corpet made of 8 mm thick pasting on floor dendried and fevicol-998 and size and shape complete all as specified and directed by Engr-in-charge.
STOOL STEEL 305X305X710 MM (FOR ITEMS SER NO 6.01 TO 6.04)
Taking out old rusted legs and S&F new legs made of 16 gauge MS sheet complete as per drg and as directed.
Taking out old rusted stiffeners and S&F new stiffeners made of 16 gauge MS sheet complete as per drg and as directed.
Taking out old unserviceable top and S&F new top 16 gauge MS sheet size and shape as per drg.
M&L denting of deshaped portion, derusting, cleaning of rusted surfaces including preparation of patches by applying putty etc and a coat of red oxide primer wherever required and applying two coats of olive green synthetic enamel paint by spray gun on internal & external surfaces complete all as specified and shown on drg.
DESK SCHOOL TYPE 'A' DESK ADULT, DESK 4X6 (FOR ITEMS SER NO 7.01 TO 7.11)
Taking out U/S 19 mm thick back plank of desk box and S&F 19MM thick Plank made out of 1st class hard wood teak wood (MP) free from knoss, cracks etc. with permissible moisture contents as per the shape and size as exists complete all as specified and as on shown drg.
All as per items No 7.01 but side plank. Size-19 mm thick 370 x 140mm
All as per items No 7.01 but Top of size 365x800 mm.
All as per items No No 7.01 but bottom of size 365x800 mm.
Taking down U/S legs and supply and fixing new legs made out of 25mm tube legs size as exists complete all as specified and as shown drg.
All as per items No 7.05 but Tube Foot Rest. Size-25mm square tube steel
Taking down old U/S rubber shoe and S/F new hard rubber shoe complete rest as per drg.
Taking out existing unserviceable block board from Desk school and provide new block board of size 800x455x19 mm thick and screwed to fix complete all as per drg.
Taking out unserviceable sides of block board from Desk school and supply & fix new sides of block board of size 380 x 140 x 19 mm thick . Complete rest all as per drg.
Taking out unserviceable partition from Desk school & S&F in partition made out of block board of size 370x120x19 mm thick. Complete rest all as per drg.
Removal of denting of deshaped portion desk fram and panting with two coats of synthetic enamel 0G paint over a coat of red oxide primer all as specified and as shown drg.
SETTEE WITH CUSHION (FOR ITEMS SER NO 8.01 TO 8.02)
Taking down old unserviceable/damaged seat and back foam cushion of settee with Tapestry cloth and S&F new seat and back of foam cushion of size 1800x600x100 mm thick 32 density fully covered with approved quality tapestry cloth duly stiched for settee complete all as specified and as shown on drgs. Note :- (i) Cost of Tapestry cloth shall not be less than Rs 220/-per meter . (ii) Cost of Preparation of wooden surface of settee by scrubbing , sand papering to smooth surface and applying two coats of french polish of required gloss is included in the rate quoted .
Taking out old unserviceable legs and Supply and fixing new legs of size and shape as exists made of Ist class HW teak duly french polished to reqd gloss to match to existing surfaces complete all as specified and as directed..
SOFA SET 5 SEATER WOODEN WITH DCRB (FOR ITEMS SER NO 9.01 TO 9.11)
Taking out old unserviceable seat & back and Supply and fixing new seat and back of foam cushion of size 1800x560x100mm 32 density duly covered with Regzin /Leather of approved quality duly stiched complete all as specified and as shown on drawing . Note : Cost of Leather/ Regzin shall not be less than Rs 340/- per meter .
Taking out old unserviceable front legs and supply and fixing new legs of size 1670x70x35 mm thick made of 1st class hard wood (teak) free from knots and cracks with permissible moisture contents as per the shape , size as exists duly french polished to reqd gloss and to match with the existing surfaces complete all as specified and as shown on drgs.
All as per item 9.02 but rear leg of size as shown on drgs
All as per item 9.02 but arm of size as shown on drgs.
All as per item 9.02 but side rail of size as shown on drgs .
All as per item 9.02 but front rails of sofa set three seater of size as shown on drgs.
All as per item 9.02 but wooden front rail of sofa single seater of size as shown on drgs .
All as per item 9.02 but stiffner/back support of size as shown on drgs.
All as per item 9.02 but wooden bearer/back support for sofa set of three seater of size as shown on drgs.
All as above item No 9.02 but wooden bearer for sofa set of single seater of size as shown on drgs.
Preparation of surface with sand paper after scrubbing and French polishing to sofa set, with and including to the parts repaired/replaced under item No 9.02 to 9.11 to the required gloss to match with the existing complete all as specified and shwonon drg.
STOOL DRESSING WITH CUSHION (FOR ITEMS SER NO 10.01 TO 10.04)
Taking down old unserviceable cushion seat and Supply and fixing new seat of foam cushion of size 430x400x75 mm thick, 32 density, l duly covered with markin cloth and tapestry cloth of approved quality fully covered duly stiched complete all as specified and as shown on drawing . Note : Cost of Tapestry cloth shall not be less than Rs 240/- per meter.
Taking out old unserviceable seat ply wood and supply and fixing new seat 12 mm thick comercial ply wood of size 425x385mm made out of 12 mm thick ply wood BWR Grade Seat complete all as specified and as shown on drg .
Taking out old unserviceable Front and back side side and supply and new front side 18 mm thick MDF Board 425x385mm made out of 18 mm MDF Board Exterior Grade complete all as specified and as shown on drg . (
Taking out old unserviceable both side and supply and new side 18 mm thick MDF Board 425x385mm made out of 18 mm MDF Board Exterior Grade complete all as specified and as shown on drg .
TABLE DINING OR'S FD- 165 M (FOR ITEMS SER NO 11.01 TO 11.06)
Top and S/F New top made by 18/19mm thick MDF Board exterier grade with 22 gauge aluminium sheet on around the top shell be provied all as specified on drg and directed by Engr-in-Charge.
Taking down old unserviceable legs and Supply and fixing legs of size 720mm, 25mm bore made of 16 gauge MS conduit pipe throughout with shape and size as exists complete all as specified and as shown on drg ..
All as per serial item No 11.02 above but centre stiffner size 1600x25x25mm.
All as per serial item No 11.02 above but side stiffener size 480x25x1.6mm.
Welding of cracked joints on frame ,derusting, cleaning of old surface of frame with & including parts/ item repaired/replaced under item No 11.02 to 11.04 above and applying two coats of white systhetic enamel paint over a coat of pink primer complete all as specified and as shown on drg .
Taking down old unserviceable shoe and Supply and fixing shoe PVC to legs complete all as specified and as shown on drg .
REPAIR TO CHAIR DINING LONG BACK /CHAIR DINING OFFRS DRG NO : FD/MAP-II/05 , FD/MAP-II/04, FD-/MAP-II/10 & FD-279 (FOR ITEMS SER NO 12.01 TO 12.11)
Opening of joints and removing of front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair all as specified in drawing.
Same as item No 12.01 but rear legs 1st class teak wood complete all as specified and shown on in drawing.
Same as item No 12.01 but stiffener size 20x25 mm 1st class teak wood complete all as specified and shown on in drawing.
Same as item No 12.01 but all side rail size 65x25 mm 1st class teak wood complete all as specified and shown on in drawing.
Same as item No 12.01 but nylon buffers complete all as specified and shown on in drawing.
Taking out old unserviceable 4MM thick PVC Seat and supply and fixing new 4MM thick PVC seat with holes screwed with rails. Compelete all as specified and directed by Egnr-in-Charge. (DRG NO FD/MAP-II/05)
Supply and fixing new stiffner Size 16"x1-1/2"x1" should be fixed bottom of PVC Seat for support made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new surface of chair.
Taking out old unserviceable cane and supply and fixing new cane weaving with 1st quility white cane 2mm H/R shape made out of vergin plastic and 0.6 mm thick as per Godrej pattern compelete all as specified and directed by Egnr-in-Charge. (DRG NO 279).
Taking out U/S foam of chair dining and S&F new 75 mm thick 32 density foam with fabric on seat of 12 mm thick ply BWR Grade duly covered with tapestry cloth of approved quality duly stiched complete all as specified and as shown on drawing and driected by Engr-in-Charge. Note : Cost of Tapestry cloth shall not be less than Rs 280/- per metre .
Taking out U/S foam of chair dining and S&F new 75 mm thick 32 density foam with tapestry cloth of approved quality duly stiched complete all as specified and as shown on drawing and driected by Engr-in-Charge. Note : Cost of Tapestry cloth shall not be less than Rs 280/- per metre .
Preparation of surface with sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 15 to 24, to the required gloss to match with the existing complete all as specified and as shown on drg.
CHAIR COMPUTER DRG No FD/MAP/01 (FOR ITEMS SER NO 13.01 TO 13.08)
Taking down U/S updown lever and S & F Up Down adustable lever with size and shape exists complete all as specified as shown on drg.
Taking out U/S back and S & F back of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S seat and S & F seat of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S hydrolic jack for and S & F seat of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S tapestry cloth of seat and S & F tapestry cloth on seat of computer chair approvel quality duly sitched complete all as specified on drawing and directed by Engr-in-charge.
Taking out U/S coaster wheel and S & F coaster wheel of twin of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S hand rest and S & F hand rest of twin of computer chair with size and shape exists complete all as specified as shown on drg.
Taking out U/S Pedestal assy and S & F of new Pedestal assy injection moulded in black 30% glass filled nylon 10.5mm dia forged bright zinc plated MS castor pin of press fitted to each prong for holding the castors.
Cupboard Steel 78x36x19 (FOR ITEMS SER NO 14.01 TO 14.08)
Taking down/out old unserviceable handle and Supply and fixing chromium plate handle 100 mm long complete all as specified and as shown on drg .
Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock godrej pattern complete all as specified and as shown on drg .
Taking down/out old lock cover and Supply and fixing lock cover made of 16 gauge MS sheet complete all as specified and as shown on drg .
Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .
Taking down old unserviceable hanging rod and Supply and fixing hanging rod 20 mm bore mild steel chromium plated made of 1 mm thick conduit pipe , 915 mm long with both side steel socket complete all as specified and as shown on drg .
Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg .
Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg .
Removal of denting for the deshaped portion of cupbaord steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 14.3 to 14.7 above including preparation of patches by applying putty etc and applying one coats of paint AD grey/Olive green synthetic enamel on the internal surfaces and hammer tex /Olive green synthetic enamel on the external surfaces by spray gun over a coat of red oxide primer complete all as specified and as shown on drg.
Cupboard Steel 50x30x17 (FOR ITEMS SER NO 15.01 TO 15.08)
Taking down/out old unserviceable handle and Supply and fixing chromium plate handle 100 mm long complete all as specified and as shown on drg .
Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock godrej pattern complete all as specified and as shown on drg .
Taking down old cleats and supply and fixing new cleats complete all as specified and as shown on drg .
Taking down/out old MS Round bar 8mm fixing with lock upper bar and below bar and same Supply and fixing of MS Round bar 8mm fixing with lock cover upper and lower complete all as specified and as shown on drg .
Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .
Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg .
Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg .
Removal of denting for the deshaped portion of almirah med steel steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 15.03 to 15.07 above including preparation of patches by applying putty etc and applying one coats of paint AD grey/Olive green synthetic enamel on the internal surfaces and hammer tex /Olive green synthetic enamel on the external surfaces by spray gun over a coat of red oxide primer complete all as specified and as shown on drg.
Book Case with Glazed Steel (FOR ITEMS SER NO 16.01 TO 16.08)
Taking down/out old unserviceable handle and Supply and fixing chromium plate handle 100 mm long complete all as specified and as shown on drg .
Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock complete all as specified and as shown on drg. Make of lock Harison and Godrej .
Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .
Taking down/out old unserviceable shelves with cleat and Supply and fixing shelves with cleat made of MS plain sheet 1mm thick complete all as specified and as shown on drg. .
Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . (Almirah Large)
Taking down/out old unserviceable glass 5mm from Door shutter frame and new glass fitted 5mm thick with door shutter complete all as specified and as shown on drg.
Taking down out old Roller/hinges (ISI Marked) from the shutters of book case and fix new roller/hinges all as specified on drg.
Removal of denting for the deshaped portion and scraping of complete old paint by paint remover OR sand paper of Book case , cleaning of rusted surface with including parts/item repaired / replaced under items No 16.03 to 16.07 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg.
TABLE CONFERENCE (FOR ITEMS SER NO 17.01 TO 17.06)
Taking out old unserviceable top and S&F new top of size 1800x900mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade). Compelete all as specified and shown on drg.
Taking down U/S front/rear legs and S&F legs of size 740x60x60mm front/rear left/right made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size complete all as specified on drawing and directed by Engineer-in-Charge.
All as item No.17.01 but top long rail of size 1800x25x100mm compelete all as specified and shown on drg.
All as item No. 17.01 but short rails 900x25x100mm compelete all as specified and shown on drg.
Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength all as directed by Engr-in-Charge.
Preparation of surface with sand paper after scrubbing and French polishing to table dining 8/6 pers with and including to the parts repaired/replaced under item No 48 to 55 to the required gloss to match with the existing complete all as specified and shown on drg.
CHAIR STEEL, CB (OFFICE) WITHOUT ARMS & CHAIR CB OFFICE WITH ARMS,CHAIR STEEL TUBULAR WITH ARMS AND W/O ARMS (FOR ITEMS SER NO 18.01 TO 18.09)
M&L welding (Gas/Elect) in repair of tubular leg, with fine finishing and standard workman ship all as specified and directed by Engineer-in- Charge.(DRG NO FD-75M)
Taking out U/S seat stiffner and S&F new seat stiffner made of 25x6 mm flat iron and 450 to 500mm long including required two holes for screw before 40mm at each end compelete all as specified on drawing as directed by Engineer-in-Charge .(DRG NO FD-75M)
Taking out U/S stiffener and S&F new stiffiner of mild steel round bars 10mm dia and 450 mm long welded between the legs withfine finishing and standard workman ship and duly painted with two coat of Olive Green paint over a coat of red oxide primer all as specified and directed by Engineer-in- Charge.(DRG NO FD-75M)
Same as item No above but 500 mm long .(DRG NO FD-75M)
Taking out U/S seat chair CB steel and S&F new seat fram with cane made of shisham wood well seasoned free from knots and cracks with permissible moisture contents as per shape and size duly black polished up to required finish. Weaving shall be done with platic cane not less than 0.35mm thick as shown on drg. E148(DRG NO FD-75M)
Taking out U/S back seat of chair CB steel and S&F new back seat fram with cane made of shisham wood well seasoned free from knots and cracks with permissible moisture contents as per shape and size duly black polished up to required finish. Weaving shall be done with platic cane not less than 0.35mm thick as shown on drg. make of cane/ :- Shah & Shah/Premier/ MPI (Maharastra Polymer Industry)(DRG NO FD-75M)
Taking down u/s plastic cap from tubular pipe and S&F new plastic cap of approved quality .(DRG NO FD-75M)
Taking down old unserviceable arms rest and S&F new arm rest made of teak wood duly black and polish compelte all as directed by Engr -in-charge.(DRG NO FD-75M)
Apply with two coat of olive green paint over a coat of red oxide primer and supplying recanning of chair tubular steel with and w/o arms. (DRG NO FD-75M)
SIDE BAORD :DRG NO 241,26M AND 1112 & (For Item No 19.01 to 19.11)
Taking down U/S legs and S&F new legs of size 50x50x75mm made of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture through out shape and size applying duly two coat of French polished to match existing surface compelete all as specified and shown on drg.
All as item No 19.01 above but bottom frame of size 1060x 290x 25mm compelete all as specified and shown on drg.
Taking down old unserviceable drawers and supply and fixing new drawer made of 12mm thick ply BWR with size and shape as exists complete all as specified and as shown on drg.
Taking down old unserviceable Top and supply and fixing New top made of 18/19 mm thick prelaminated MDF Board (exterior Grade). Complete all as specified and as shown on drg.
Taking down U/S partition and S&F new partition of MDF board of size 610x460mm x18mm compelete all as specified and as shown on drg.
All as per item ser No. 19.01 but bottom of size 1220x455mmx18mm compelete all as specified and shown on drg.
Taking down old unserviceable back ply and supply and fixing new ply of size 1220x635mm, 6mm thick commericial BWR grade, IS-303 grade complete all as specified and as shown on drg
All as item No 19.07 but side of size 645 x 455mm compelete all as specified and shown on drg.
All as per item No.19.07 but shelf of size 425x770 compelete all as specified and shown on drg.
Taking down old unserviceable Handle and supply and fixing new handle 75mm dia, S Steel , chromium plated complete all as specified and as shownon drg.
Preparation of surface with sand paper after scrubbing and French polishing to side board, with and including to the parts reppaired/ replaced under item No 19.01 to 19.09 to the required gloss, to match with the existing complete all as specified and as shown on drg.
Charpoy GI Pipe ply top FD No 220A: (For Item No 20.01 TO 20.03)
Supply and fixing 12mm thick new ply top size 1980mm x900 mm, BWR grade with 06 x Nos of GI Nut and bolt 3"x6mm & 06 Nos x 1.5"x6mm, ISI marked including taking out old unserviceable ply top complete and tightening of all charpoy all as specified and directed.
S&F 870 mm long new stiffner duly black painted made of 40x6mm thick flat iron including taking out unserviceable stiffner complete all as specified all as specified and directed.
S& F new L-type bracket duly black painted made of MS flat iron of Size40x6x75mm long and welded two frame including taking out old bracket complete all as specified and directed by Engr-in-Charge. M
m/s tripurari enterprises
m/s pramod chandra jain
GUJRAL BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .