8268 PROVN OF WASHROOM WITH TOILET BLOCK EACH FOR PATIENTS FOR LADIES / GENTS OPD AND PROVN OF LPG STORE AT AICTS PUNE AND SPL REPAIRS OF ACRYLIC LAWN TENNIS COURT LOCATED PCDA(O) PUNE UNDER GE SOUTH PUNE

Amount

Excavation in trenches not exc 1.5m wide and getting out in hard/dense soil complete all as specified and as directed.

M&L for cement concrete type D-2, 1:4:8 (Using 40mm graded aggregate as in foundation complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and as directed.

Removing the excavated surplus soils exceeding 50mtr but not exc 250 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Filling under floor with moorum laid in layers not exc 15 cm thick spread ,levelled and rammed , watering and compacted complete all as specified and as directed.

M&L for RCC (1 : 1½ : 3) design mix type A1 ( 20mm graded aggregate ) in foundation and plinth beams complete all as specified and as directed.

M&L for RCC (1 : 1½ : 3) design mix type A1( 20mm graded aggregate) in columns complete all as specified and as directed.

M&L for RCC (1 : 1½ : 3) type A1 (using 20mm graded stone aggregate) as in columns complete all as specified and as directed.

M&L for RCC (1 : 1½ : 3) type A1 (using 20mm graded stone aggregate) as in slabs complete all as specified and as directed.

M&L for RCC (1 : 1½ : 3) type A1 (using 20mm graded stone aggregate ) as fins, facias etc complete all as specified and as directed.

M&L for use and waste of form work to sides of foundation, footing & plinth beams rough finished surfaces complete all as specified and as directed.

M&L for use and waste of form work to sides of columns fair finished surfaces complete all as specified and as directed.

M&L for use and waste of form work to soffits of slab not exc 200 mm thick rough finished surfaces complete all as specified and as directed.

M&L for use and waste of form work to fins, louvers , facia etc complete all as specified and as directed.

M&L for use and waste of form work to edges of concrete flat not exc 20 cm wide rough finished surfaces complete all as specified.

M&L for mild steel TMT bars 10mm dia and over in reinforcement including cutting bending and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8 mm dia and over in reinforcement including cutting bending and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over upto and incl 10mm dia in stirrups/spacers, including cutting bending and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 on brick surfaces finished even smooth with spong finish duly mixed with integral water proofing compound as per manufacturers instrucitons complete all as specified and as directed. (Note :- WPC shall be measured and paid separately)

M&L for Rendering 5mm thick in cement mortar (1:4), with using WPC, over and including 10mm thick dubbing coat on fair faces of brick work in cement plaster (1:4) (external wall) complete all as specified and as directed.

M&L for Rendering 10 mm thick in cement mortar (1:6) on internal surfaces of walls complete all as specified and as directed.

M&L for Rendering 10 mm thick in cement mortar (1:4) on concrete surfaces with WPC, over roof slabs & chajjas top complete all as specified and as directed. (Note:- The WPC will be measured and paid for seperately)

Supply only integral water proofing compound complete all as specified and as directed.

M&L for new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for cement concrete type D2, 1:4:8 (40 mm graded agg) for 100 mm thick of sub base complete all as specified and directed.

M&L for cement concrete type B0, 1:2:4 (12 mm graded aggregate) in floorings 25 mm thick complete all as specified and directed.

M&L for screed bed of bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for joint free Glazed ceremic colour tiles 600 x 300mm , 7 to 8 mm thick in walls set and jointed in neat cement slurry incl backing coat in CM 1:4, 10mm thick and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free non skid ceremic colour tiles 7 to 8mm thick (square/rectengular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floors and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F vitreous china urinal half stall type with necessary fittings complete all as specified and directed.

S & F GI tubing and connections complete fixed to walls for the following :-

15mm bore

20 mm bore

S&F PVC (SWR) pipes single socketed in any length 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length 75mm dia complete all as specified and as directed.

S&F PVC (SWR) bend/L bow 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bend/L bow 75mm bore complete all as specified and as directed.

S&F PVC(SWR) branch piece 110mm bore double equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) reducers 110 x75mm bore complete all as specified and as directed.

S&F PVC (SWR) 'S' trap 110mm complete all as specified and as directed.

S&F PVC (SWR) gully trap 110mm/125mm with grating complete all as specified and as directed.

S&F in repairs providing and fixing chromium plated toilet fitting complete all as specified and as directed for the following:-.

Bib Cock CAT No. CHR-3037 of Jaquar with wall flange

Soap dish CAT No. CHR-7733 of Jaquar

Towel ring square CAT No. CHR-7721 of Jaquar

Single Towel rail 600mm long CAT No. ACN 1111 NM of Jaquar

Angular stop cock conforming to CAT No.CHR 5059 of "Jaquar" or of equivalent make specified here-in-after.

S & F in repairs, Two way bib cock brass CP toilet fittings complete all as specified & directed. Make: Jaquar CAT No 35041 or equivalent model in Marc/ ESS-ESS as approved by GE.

S&F gun metal globe valve with iron wheel fixed for 20mm bore pipe complete all as specified and as directed.

S&F ball valve brass with polythelene float and fly nut fixed complete for 20 mm bore of pipe complete all as specified and as directed.

S&F health faucet with connection flexible pipe complete all as specified and as directed.

S&F oval shaped coloured vitreous china WHB of overall 600mm size including 32mm CP waste coupling, PVC waste pipe etc complete including Pillar cock long neck with aerator CAT No CON -021KN of Make - Jaquar or of equivalent specified here-in-after complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

M&L for Granite slab, 18 to 20 mm thick of approved colour, laying in design pattern using approved colour granite slab strips, laid bedded & jointed in neat cement slurry and pointed in white/coloured cement to match the shade of slab, laid over and including 20mm thick, screed bed in CM 1:6 including rubbing and polishing complete as in floors complete all as specified and as directed.

S&F Vitreous china squatting pan orissa pattern size 580x440mm white with intergal foot rest excluding flushing cistern and flush pipe but including provn of lime concerete bedding complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F fancy type pillar taps, cast copper alloy, with capstan head chromium plated 15mm bore complete all as specified and as directed.

S&F fancy type stop cock 15mm bore chromium plated complete all as specified and as directed.

Labour only for Rounding to edges of stone slabs one edge in any locations complete all as specified and as directed.

S&F PVC door frame of size 50x47mm made out of 5mm thick prelaminated PVC sheet reinforced with mild steel sq tube complete all as specified and as directed.

S & F factory made solid PVC door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing complete given on Sl Page No. 149 of SSR Part-II 2020 complete all as specified and as directed.

S&F Aluminium butt hinges 100mm medium weight complete all as specified and as directed.

S&F Aluminium sliding bolt 300 long fixed with bolts& nuts complete all as specified and as directed.

S&F Aluminium tower bolts 150mm long complete all as specified and as directed.

S&F aluminium handles, anodised, fabricated type, of size 150 mm complete all as specified and as directed

M&L preparation of wood surfaces and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )hoisted and fixed in position with all fittings and fixture all as specified in SSR Part 1 capacity 1000 litres incl PTMT float valve with PVC ball 20mm bore of pipe complete all as specified and as directed.

M&L for PCC 1:3:6, type C2 75mm thick fair finished surfaces as in plinth protection/ foot path complete all as specified and as directed.

S & F three track sliding window with two or more shutter with 4 mm thick tinted glass, one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium Powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844 (f) Glazing Clip 19352

S & F fixed glass ventilators using 5mm thick plain glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP 20048 (b) Glazing clips 19352

S&F MS framed work such as grills with ends of bars shouldered or riveted, or forged into spikes, framed guard bars or similar work using steel section conforming to Fe-290 grade E-150 complete all as specified and as directed.

M & L for precast factory made manhole cover of medium duty, area of each cover not exc. 0.75 sqm, 100 mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and set CM 1:4 and sides covered by MS sheet with necessary collars complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate)as in surface channels and drains including all moulds and forms complete all as specified and as directed.

Extra for forming fair finished drain or channel inner girth not exc 30 CM in cement, concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, for 200mm bore of pipe complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundations, manholes etc and getting out in in soft/loose soil complete all as specified and as directed.

M&L for RCC pipes class NP-2 with socketed ends laid and jointed complete with rubber ring joints of 250mm bore complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded agg as in bed to drain pipes including forming cradles for 250mm bore pipe complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in benching to manholes and coping etc complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 on brick surfaces finished even smooth with spong finish duly mixed with integral water proofing compound as per manufacturers instructions complete all as specified and as directed. (Note :- WPC shall be measured and paid separately)

Surface excavation not exc 30 cm deep and averaging 15 cm and getting out soft soil complete all as specified and as directed.

Hard core of guage not exc 63 mm ,deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surfaces with broken stone boulders complete all as specified and as directed.

M & L for hand cut Kota stone slab, flooring 20 to 25 mm thick over and including 20mm cement screed bed in (1:6) laid and jointed with grey cement slurry mixed with pigments to match with the slab including rubbing and mirror polishing complete etc complete all as specified and directed.

M & L for kota stone slab skirting/Dado 20 to 25 mm thick in wall including 10mm thick CM (1:4) backing coat set and jointed with grey cement slurry mixed with pigments to match with the slab including rubbing and polishing complete all as specified and as directed.

M&L for RCC 1:1½ : 3 Design mix type A1( 20mm graded aggregate ) in roof beams complete all as specified and as directed.

User and waste of form work to sides and soffits of beams fair finished surfaces complete all as specified and as directed.

S & F pressed steel frames for doors with one & more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S & F IInd class hard wood 35mm thick factory made, flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

S & F IInd class hard wood factoy made skeleton shutters of 35mm thick prepared to receive glass/gauge etc. with sash bars edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified and as directed.

S&F MS work as in guard bars,using with round or square bars & flat iron etc incl necessary drilling,welding etc complete & simillar articles confirming to Fe-290 grade E-165 complete all as specified and as directed.

M&L for mild steel electroplated butt hinges 100mm medium weight complete all as specified and as directed.

S&F mild steel electroplated sliding bolt 300 long fixed with bolts & nuts complete all as specified and as directed.

S&F mild steel tower bolts 150mm long complete all as specified and as directed.

S&F mild steel powder coated handles 150mm complete all as specified and as directed.

S & F machine cut cuddappa stone slab one side polished 40 to 50 mm thick as in shelf set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm screed bed in cement mortar (1:4) complete all as specifed and directed.

M&L for water proofing treatment with APP membrane weighing 3 kg /sqm laid and sealed using hot blower over RCC roof duly cleaning the surfaces and applying bituminous primer complete all as specified and as directed.

Excavation over areas not exc 1.5 cm deep and getting out hard dense soil complete all as specified and as directed.

M&L for cement concrete in pavement/hardstanding of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrte more than 25 cm complete all as specified and directed

M&L for 200 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / foundation complete all as specified and as directed.

M&L for Forming 20mm thick expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' and thickness of concrete slab in 150mm complete all as specified and as directed.

Forming contraction (Dummy) joint 65 mm deep x 10 mm wide filled with sealing compound all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in benching to MH and coping etc complete all as specified and as directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly tack coat with bituminious primer using paving bitumen 80/100 (VG-10 grade ) @ 5.0 kg per 10 sqm on black top surface and providing and laying bituminous premixed semi dense asphaltic concrete (design mix) 30 mm thick (consolidated thickness) with 5.5% paving bitumen of grade VG-30 , binder content by weight of total mix , rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and as directed.

M&L for premix Bituminous macadam with binder content @ 4% by wt of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete all as specified and as directed.

M&L for cement concrete Type C-2 1:3:6 in surface channels and drains complete all as specified and as directed.

M&L for durable & required Minimum maintenance , all weather suitable/friendly protective against UV Rays :- (a) 1st layer of primer to improve bonding of acrylic paint with sufloor. (b) 2nd layer Acrylic Resurface 367-30 for filling and smoothing sub floor. (c) 3rd & 4th layer 100% acylic Latex based texured tennis base color coat . (d) 5th Finished top color coat to protect flooring against UV Rays with overline marking with acrylic paint (Make :- EBACO or GO SPORTZ Equivalent)

Removing of Old MS galvanised chain link fencing and refixed the new PVC colured chain link fencing of mash size 50mmx50mm of same place with old iron bars complete all as specified and directed.

S&F GI tubing tubes "medium grade" 50 mm dia galvanized with all fittings and fixed complete to floor incl making holes in floor, fixed in concrete complete all as specified and directed by Engr in charge

S&F Hand rail, half round or other stock section, fencing post including cutting notching for wire etc flat iron fillets incl all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 Ged E-165 complete all as specified and directed.

M &L for preparation of new steel surface & applying two coats of synthetic enamel to steel surface of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out cable etc and repairs / laying cables etc and getting out in Soft/Loose soil of strata complete all as specified and as directed by the Engineer-in-Charge.

M&L for laying of Reinforced concrete pipes,class NP2 of dia 100 mm ,2 nos half round ( for bottom and top )and before laying exacaved area shall be leveling all as specified and directed Engr-in-charge.

Supplying ,Laying, jointing and testing XLPE insulated, armoured, heavy duty, aluminum conductor cable of size 16 sq mm,4 core, 1100 volts grade ,laid in trenches/ducts, floors, fixed to pole/ walls etc. complete all as specified and directed.

M&L for Sub main wiring complete with two runs of 4 Sqmm single core PVC FRLSH insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through in and including ERW steel conduit 25 mm dia and accessories surface on wall, roofs etc with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains all as specified. with all necessary fixing accessories and fittings such as Tees, bends, elbows, nipple, junction boxes, flame proof flexible pipe, connecters, saddles, screws, rowel plug etc all as specified and directed. (Note - Two run of 4 sqmm, one run of 4 sqmm and one Mtr ERW steel conduit of 25 mm dia shall be measured as one length.)

M&L for flame proof rotary switch, in cast aluminium LM-6 suitable for 16 amps DP suitable for controlling three light fittings, earthing external 2 Nos, and internal-2 Nos, 3/4" ET entry, hardware in stainless steel with anti corrosive epoxy powder coated with protection IP-65, equipment standard as per IS-2148/81 along with suitable size flame proof double compression cable glands heavy duty for gas group I/IIA/IIB/IIC approved by CCE and certified by CMRI complete all as specified and directed by Engineer in charge Make:- SUDHIR/BALIGA/FLEXPRO

M&L for flame proof distribution board SPN 8 way (Totally enclosed dust and flame proof/ jet proof (IP- 65 protection) including flame proof MCB SP 5 to 30 Amps 240/440 volts AC 10 KA (6 Nos) and ELCBs SPN 40 Amps 240/415 volts AC 50 Hz 16 KA (01 Nos) flame proof suitable for gas group I/,IIA / IIB/IIC as per IS-2148 of 1981 having degree of protection IP-55 as per IS-2147 of 1962 cast aluminium alloy LM-6 construction light gray epoxy shade No 631 of IS-5 powder coating having provision for one number internal and two number external screws for earthing, also having 'O' ring neoprene rubber gasket, hardware in external steel construction having two numbers ET 1 to 1/4" ET bracket incoming ad 12 Nos 3/4" ET out going cable entry from bottom side also having terminals 4 Nos suitable for 200 Amps having terminals 4 NOs suitable for 200 Amps Aluminium bus bar type and 24 Nos 2.5/4 Sqmm clip on type all as specified and certified flame proof by CMRI Dhanbad and all as specified and directed Make : Sudir/Baliga/Flexpro (Note: The quoted rate shall be deemed to include MCB SPN/EL CBs and GI brackets / fixtures)

S & F flamproof LED light fitting complete with die cast aluminium housing, IP-65 protection complete all as specified and directed

S & F flamproof Heavy duty Exhaust fan 300 mm dia single phase 1440 RPM complete all as specified and directed

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & pvc conduit, including of junction and terminal boxes, all fittings such as tees, bends, elbows, reducers, bell mouth tube ends, couplers, lock nuts, saddles pipe hook, etc. of External diameter 20mm all as per site requirements including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead for one light point / fan point controlled by one switch complete all as specified and as directed.

All as per item no. 117.00 above but for One socket outlet 5 Amp controlled by one switch on the independent board.

All as per item No. 117.00 above but using 2.5 sqmm copper conductor for with 1.5 sqmm earth wire one 6 pin 15 amps socket outlet on independent board all as specified and directed.

S&F switch piano type flush, single pole, one way, 5Amp 230 Volt complete all as specified and as directed. (Make- Plaza/ Havells/ Anchor reo )

S & F socket outlet 5 pin,5 Amp 230, complete all as specified and directed. (Make- Bajaj/Havells/Anchor)

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Ampflush type universal, complete all as specified and directed. (Make- Bajaj/Havells/Anchor)

S&F ceiling rose,pvc surface backlit, 63.5x48 mm three terminal complete all as specified and as directed.

S&F lamp holder PVC insulated body with back plate suitable for batten/angle complete all as specified and directed.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar . make-schnider/legrand/ Havells

S&F testing and commissioning of MCB SPN 240 volt 16 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs. make-schnider/legrand/ Havells

S&F testing and commissioning of MCB SP 240 volt 6 Amp to 40 amp 10 KA capacity having C-curve characteristics connected with suitable lugs. make-schnider/legrand/ Havells

Supply and fix Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly of capacity 20 Watt energy efficient ready to use complete all as specified and directed. (Make- CAT PART NO LHEXAPP7IN1W020 of Havells or equivalent in Philips/ Wipro)

S & F water heater storage vertical type ISI marked 5 Star Rating electric supply 230 volts, 50 Hz, capacity 25 ltr including inlet and outlet PVC connection pipe 600mm long,fixed to wall vertically by 02 nos. fastener bolts 150 mm long with nuts and washers or J-hooks of appropriate size grouted in wall in PCC, complete all as specified and directed.

S&F air fresher PVC type sounless 230 volts ISI marks of size 250 mm sweep including fixing arrangement complete all as directed . (Make- Bajaj Cat No- 70049 or equivalent make in Crompton/Orient.)

Supply and fix street light fittings Pressure die cast aluminium housing, IP 66 Proptection, heat resistance toughened glass with frame LED street light luminaries complete with driver and all standard accessories of capacity 25 Watt LED including necessary fixing arrengements with GI Pipe 25mm and MS clamp 02 Nos, necessary connection etc all as specified and directed (Make :- Wipro cat part No LR02-291-XXX-57-XX or same type in all respect of Havells/HPL/Bajaj)

Supply and lay GI pipe galvanized, “Medium grade”, including fittings 20 mm bore complete all as specified and as directed.

Supply and lay pipe galvanized, “Medium grade”, including fittings 25 mm bore complete all as specified and as directed.

Vijay Construction and Company

M/S Sandeep Enterprises

sagar construction

Aishwarya Constructions