2 KL Hydrant Cart

Hydrant Cart Fab & Delivery — SUPPLY AND FABRICATION OF INLET NOZZLE 600 MM, SUPPLY AND FABRICATION OF SHELL NOZZLE 600 MM/300 CLASS: SUPPLY, FABRICATION, ERECTION AND WELDING OF NOZZLE OF 600 MM DIAMETER WITH REINFORCEMENT PAD PLATE, SEAMLESS PIPE/ PLATE FABRICATED PIPE, ASA CLASS 300 SLIP ON FLANGES WITH DRILLED HOLE AS PER ANSI-B-16.5, GASKET, NUT, BOLT, WASHER, TROUGH INCLUDING INSTALLATION OF OWNER SUPPLIED VALVE COMPLETE AS PER SPECIFICATION. REINFORCEMENT PAD SHALL BE TESTED WITH SOAP SOLUTION BY APPLYING PNEUMATIC PRESSURE OF 1.05 KG/SQ.CM BEFORE HYDRO TESTING. CONTRACTOR TO SUPPLY ALL MATERIAL REQUIRED FOR THE NOZZLE. DESIGN, SUPPLY, FABRICATION, WELDING, ERECTION, TESTING OF THE ABOVE MENTIONED SHELL AND ROOF APPURTENANCES. RATE SHALL INCLUDE SUPPLY, FABRICATION AND WELDING OF NECK RINGS, SEAMLESS PIPE, BOLTING SLIP-ON FLANGES WITH BOLT, NUT, GASKET, TROUGH ETC. AS PER DRAWING COMPLETE AS PER SPECIFICATION. SCOPE OF SUPPLY OF HPCL SHALL BE LIMITED TO PLATES FOR RF PAD ONLY. THE SCOPE OF VENDOR INCLUDES PREPARATION OF DRAWING, GETTING APPROVAL FROM HPCL/MECON, SUPPLY, CUTTING, FABRICATION, WELDING, TESTING OF APPURTENANCES INCLUDING PIPE, FLANGE, RF PAD, MATCHING/COMPANION BLIND FLANGES. NO SEPARATE PAYMENT FOR RF PAD SHALL BE DONE. NOZZLE OF SIZE UP TO 300 MM DIAMETER. SHALL BE FABRICATED THROUGH SEAMLESS PIPE CONFIRMING TO ASTM A 106 GRADE B SCH XS. NOZZLE OF SIZE 350 MM DIAMETER. AND ABOVE CAN BE FABRICATED BY PLATE OF MIN THICKNESS OF 14 MM. THE JOB SHALL ALSO INCLUDE DP TESTING OF THE ROOT AND RADIOGRAPHY OF THE SEAM JOINT IN CASE OF NOZZLE BEING FABRICATED FROM PLATES. ONLY PLATES FOR REINFORCEMENT PAD WILL BE SUPPLIED BY HPCL. NOZZLE NECK LENGTH SHALL BE AS PER DRAWING/ DATA SHEETS/SPECIFICATIONS. THE JOB TO BE EXECUTED AS PER ATTACHED TECHNICAL SPECIFICATIONS, JOB PROCEDURES ETC. COMPLETE AND AS DIRECTED BY ENGINEER IN CHARGE.