SPL REP TO BLDG NO P5 FLAG STAFF HOUSE PROVN OF RCC JALLI AND CONNECTED MISC WORK AT VIEW POINT AT SVY NO 93 SPL REP TO HARDSTANDING AREA ALONG FLOOD BUND PART OF SVY NO 325 PROVN OF CHANGING ROOM WITH CABINET FOR DEF CIV EMP AT DANAPUR CANTT

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed.

M&L hard core of broken bricks of gauge n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed.

M&L PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, Filling and mass concrete complete all as specified and as directed.

S&F 25-30mm thick Lime stone machine cut for flooring including screed bed or bedding layer of 20mm thick in CM 1:4, complete all as specified & directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified.

M&L reinforced cement concrete M-25 Design mix, in foundation, footing, foundation beams,plinth beams, bases for columns,pedestal, under reamed piles, mass concrete, etc complete all as specified and as directed.

M&L reinforced cement concrete M-25 design mix, as in columns, pillars, posts, struts etc complete all as specified and as directed.

M&L reinforced cement concrete M-25 design mix as in Beams, cantilevers, bressumm ers, lintels over 1.5m complete all as specified and as directed.

M&L for Form work to sides of rough finished surfaces of concrete flat foundations, footings, bases of columns, sides and sofits (if any) of foundations & plinths beams and similar wk flat etc complete all as specified.

M&L for Form work to rough finished square, rectangular or polygonal concrete surfaces as in sides of columns, pillars, posts, struts,etc complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item no 11 above but 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and as directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of brick/concrete surfaces in CM (1:4) , finished even and smooth (Without using extra cement ) complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (Without using extra cement ) complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm each complete all as specified and directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

S&F 1st class soft wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 1st class soft wood decorative type Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

Sypply and fixing Toughened glass 12mm thick as in Glass door, hinged doors and similar work including cutting to shape, drilling holes required, Grinding, polishing and rounding off edges of glass including necessary fixing which required to holding the door complete all as specified and directed.

M&L Preparing old wooden surfaces exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparing old steel surfaces exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying 2mm thick Putty on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and as directed

M & L for preparation of newly plastered surfaces of wall & concrete and applying including 2 mm thick wall care putty and preparation complete all as specified and as directed.

M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on newly plastered surfaces including, rubbing with sand paper complete all as specified and as directed.

S&F in repair Door closer hydraulically regulated cast iron body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

S&F Modular kitchen with steel shelf / cabinets, chimney, RTG, sink and connected items as shown in drawing as directed by Engineer -In-Charge / GE Complete all as per drawing specified and directed

M&L for 100mm POP moulding work for internal wall surfaces including edges, corners on wall and ceiling portion as required complete all as specified and directed.

S&F 100 mm size Butt hinges, Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed

S&F Brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed..

S&F 300 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed as specified.

S&F floor door stopper 150 mm overall length of cover plate of brass body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge

S&F Roof tiles, Mangalore pattern, interlocking at side jointed in cement mortar 1:4 complete all as per specified and as directed.

M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. .

M&L for glazed ceramics coloured tiles of size (450x300x 7mm) thick in vertical surfaces such as skirting/ dados/wall, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 qm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match shade of tiles over and including 15mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L for two coats of weather coat paint on new surfaces of wall including preparation of new plastered surfaces complete all as specified and as directed by Engr-in-Charge.

Boring holes 3m deep in soil for single under reamd piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm) complete all as specified and directed.

S&F RCC jalli of 35-40mm thickness complete all as specified and as directed.Sample of RCC jalli to be approved by GE/Users.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

M&L sand filling under floors or in foundations includig watering and consolidation complete all as specified and as directed.

S&F machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified.

S&F machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15mm thick screed bed complete all as specified and as directed.

Excavation in trenches in soft/ loose soil not exc 1.5m wide and not exc 1.5m deep for foundn etc n. exc 10 Sqm on plan and n. exc 1.5m in depth complete all as specified and directed

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25 mm in soft/loose soil complete all as specified and as directed

Removing excavated material not exceeding 50 m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed

M&L 75mm thick PCC 1:4:8 type D-2 (40mm graded stone agg) in sub base complete all as specified.

M&L 40 mm thick cement concrete 1:2:4 type B0 damp proof course to horizontal or vertical surface incl necessary form work complete all as specified.

M&L for Form work to rough finished flat surfaces as in sides and soffits of beams, lintels, coping etc complete all as specified and as directed

Supply only water proofing compound (liquid),ISI marked.

M&L for Rendering 15 mm (in two layers 10mm & 5mm) thick in cement mortar 1:4 on concrete surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof slab complete all as specified and directed . NOTE: water proofing compound shall be measured and paid seperately

M&L for applying two coat of cement base paint on newly plastered wall surfaces over a coat of primer incl preparation of surfaces etc complete as all specified.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed by Engr-in-Charge.

M&L Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.

S&F framed guard bars with mild steel Square bars with ends of bars shouldered and riveted and similar work confirming to Fe -290 (Gde E-165) complete all as specified and directed.

M&L for applying two coats of synthetic enamel painting over a one coat of pink primer over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed..

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm as in gauze door / window / ventilator shutters. etc all complete all as specified and directed..

S&F steel windows with side hung shutters including projecting type hinges with MS handles and tower bolts complete with glazing & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed.

M &L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection finishing even and smooth without using extra cement laid in bays with construction complete all as specified and directed

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper including 3 mm thick Birla/ JK wall putty complete all as specified and directed.

S&F hollow rolled mild steel structural steel work in tubular/ Square/rectangular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engr-in-Charge.

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle bracket, cleat and other connection conforming to Fe-410-W (Grade E-250) 'A' quality complete all as specified and as directed by Engr-in-Charge.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed by Engr-in-Charge.

All as per item No 67 above but plain sheet as in ridge fixed with self tapping screws all as specified.

M/L for screed bed or bedding layer of mortar 15mm thick laying floor finshes in Cm 1:6 for laying of floor tiles as directed.

M&L for 10mm thick Light shade coloured vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in cement mixed with pigments to match shade of tiles complete all as specified & directed.

M&L for cutting holes into or through brick walls exc half thick brick wall but n exc one brick wall built in cement mortar and wall of cement concrete for inserting of rolled mild steel structural steel work and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required all as specified

S&F powder coated Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. with 12mm thick Gypsum tile of zize 605mmx605mm complete all as spd and directed.

S&F powder coated Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as spd and directed.

S & F powder coated Steel (Thickness of door 0.8mm and Body 0.6mm) Locker component organiser with size (0.6mx0.45mx0.45m) with all fittings as lock, handle etc complete all as specified and directed.

Taking down carefully aluminium point wiring(any type)for one light point, fan point ,exhaust fan point, bell point, power point complete including all fittings such as switches, socket, pendents holder, ceiling rose, sketch fittings, tube light fittings, regulatores unscrewing the switch sockets, ceiling rose, regulators from boards/outlet boxes and making good the disturbed surfaces of wall/ ceiling and colour washing matching with the existing colour wash all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

All as item No.77 here-in-before but for one light controlled by two way switch

All as item No. 77 here-in-before but one 3 pin, 5amp socket out let on independent board complete all as specified and directed.

All as item No.77 here-in before but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 2.5 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed. NOTE : Two runs of 6 Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length.

M&L for sub main wiring with PVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 Sqmm + 1x 4 Sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed by Engr-in-Charge. Note - Two runs of 4 Sqmm including one run of 4 Sqmm including PVC conduit shall be measured as unit length complete all as specified and directed.

S & F Modular switch 1 way 6A,1 module complete all as specified and directed.

S & F Modular switch 2 way 6A,1 module complete all as specified and directed.

S&F Modular switch socket combination 3 pin 5 Amps multipurpose type 240 volts complete all as specified and directed.

S & F Modular switch Bell push, flush type, 5 amp complete all as specified and directed.

S & F Modular 2/3 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed.

S & F Modular bell, ding- dong , AC, 230 Volt, single pole complete all as specified and directed.

S&F Modular Switch socket Combination 16A, 6 pin, 3 module complete all as specified and directed.

S&F ceiling rose single phase , PVC poly carbonate,insulated body three terminals ISI marked complete all as specified and directed.

S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete with suitable for 1 x 63Amp TPN as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed.

S&F 415V 10KA 'B' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 63 Amp in the DB complete with connection testing and commissioning complete all as specified and directed.

S& F for sheet metal enclousre factory made for MCB DB's SPN, 8 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete all as specified and directed.

S&F MCB SP 240 Volt 6 TO 40 Amp ISI marked conforming to 'C" curve, breaking capacity 10 KA complete all as specified and directed.

S&F MCB SPN 40 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.)

S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan complete all as specified and directed.

S&F LED down light - 12 W warm white , 220V,AC decorative box type with driver, holder including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. .

S&F exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans.complete all as specified and directed.

S&F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to pole complete all as specified and directed.

S&F wall light double head bronze finish type bulb 9 W bulb including complete all as specified and directed.

S&F Table lamp light fabric shaded with crome finish. LED 7W including complete all as specified and directed.

M/S NANDA CONSTRUCTION (BID ID -3217478)

M/s KUMAR ENTERPRISES (BID ID -3216910)

M/S SHEO KUMAR SINGH AND SONS (BID ID -3216683)

RC GUPTA AND SONS (BID ID -3216533)

CP RAJ (BID ID -3218354)

Jai Ambay Construction (BID ID -3221932)

M/S MODERN CONSTRUCTION (BID ID -3221432)

M/S Harsh Traders (BID ID -3219931)