SPECIAL REPAIRS TO CERTAIN OMQs AT AIR FORCE STATION HAKIMPET

Amount

B/R PORTION Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 25 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in floors complete all as specified and as directed.

M&L Plain Cement Concrete (1:4:8) Type D2 40mm Graded stone aggregate filling and mass concrete in sunkun floor complete all as specified and as directed.

M&L Double charged Vitrified Ceramic tiles of dark/light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm and n exc 0.42 Sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and as directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.11 sqm but not exceeding 0.18 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for rendering to Stone masonry surfaces or fair faces of concrete surfaces, 10mm thick in cement mortar 1:3, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and as directed.

M&L Glazed Ceramic tiles coloured, of size 600mmX350mm/300mmX(7-9)mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and as directed. Note: Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile and the cost is included in rate quoted above.

M&L Glazed Ceramic tiles coloured, of size 450mmX300mm/300mmX7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and as directed. Note: Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile and the cost is included in rate quoted above.

Dismantling of stone slabs of any description or thickness in floors and approns etc, laid,bedded and pointed in any mortar complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and as directed.

Roughening surfaces of old concrete floor/roof surfaces by picking, sweeping clean and washing down with water to remove dust,etc complete all as specified and as directed.

M&L Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces complete all as specified and as directed.

M&L Providing, cement concrete in roof padding of type B0 1:2:4 (12.5mm graded aggregate) complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work / concrete surfaces in CM 1:3 finished even and smooth without using extra cement and mixing with WPC as per manufacturers instruction complete all as specified and as directed. Note:- WPC will be measured and paid separately.

Supply only liquid water proofing compound to incorporate in above item complete all as specified and as directed.

M&L Applying evenly a priming coat of industrial bitumen 85/25 at the rate of 0.3 kg per sq.m including cleaning surfaces complete all as specified and as directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.

M&L applying two coats of aluminium paint @ 0.1 ltr/Sqm per each coat complete all as specified and as directed.

M & L Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; with screed bed of CM 1:4, 15mm thick, set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and no pigments complete all as specified and as directed.

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F 35mm of 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30mm 2nd class HW thick factory made skeleton shutters, open rebated and preparedto receive gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete complete all as specified and as directed.

S&F 125 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steel door frame complete all as specified and as directed.

S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed.

S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour Prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed.

Supply and fix 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed.

Supply and fix 125 mm size extruded aluminium door handles fabricated type complete all as specified and as directed.

S&F Powder coated Aluminium frame for doors,windows/ Louvered and partitions with one or more rebates including cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as specified and as directed.

Supply and fix Powder coated Aluminium window shutters, sliding type two track for fixing glass sections of aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note : Glass will be measured and paid separately under relevant item.complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 5.5 mm thick tinted glass of superior quality fixed to aluminium partition and door each pan complete all as specified and as directed.

S&F Anodised aluminium grill (deco grill) any size 10 mm thick complete with frame or channel section including all necessary fittings complete all as specified and as directed.

Supply and fix in repairs 25 mm dia Stainless steel curtain rods with fixing brackets, stops, rollers etc.and taking down old pipe complete all as specified and as directed.

supply and fix 20mm thick flush shutters, solid core construction, with block board core and plywood face panels for cabinet and cupbord, commercial type on both sides complete all as specified and as directed.

M&L 1mm to 1.5mm thick sunmyca sheet glossy finish any colour paste with favicol on plywood for cabinet and cupbord, commercial type on one sides complete all as specified and as directed.

M&L Soft closer drawer channel of any length as per requirement complete all as specified and as directed. Make : Godrej

M&L Stainless steel Basket any type / any size fixing complete all as specified and as directed.

S&F Stainless steel Handle 100mm dia complete all as specified and as directed.

S&F Clip on soft hinges full overlay complete all as specified and as directed. Make : Godrej

Extra over rates of 18/19mm thick particle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed.

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed.

S&F brass magnet for cupboard complete all as specified and complete all as specified and as directed.

S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed.

M&L Rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 m complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr complete all as specified and as directed.

M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement complete all as specified and as directed.

M&L Complete removal of existing treatment on walls complete all as specified and as directed.

M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed.

M&L Raking out and Raised Pointing of CM 1:4 joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in Cement or cement lime mortar complete all as specified and as directed.

M&L Finishing walls on Stone masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L applying 3 coats of white wash on newly plastered surfaces on ceilings including preparation complete all as specified and as directed.

Dismantling of existing PVC 500-1000 ltrs water tank complete all as specified and as directed.

S&F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks complete all as specified and as directed.

S&F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks complete all as specified and as directed.

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and as directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe complete all as specified and as directed.

Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed.

All same as per item No.70 here in before but 20 mm bore complete all as specified and as directed.

All same as per item No.70 here in before but 25 mm bore complete all as specified and as directed.

S&F 16mm bore CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings,floors etc. in repairs inc concealed piping after cutting in brick work/stone masonry walls where ever required complete all as specified and as directed.

All as per item No.73 above but 20mm bore complete all as specified and as directed.

Supply and fix steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and as directed.

S&F sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 560mmX460mmX203mm including waste couplings, waste pipe and all other necessary fittings complete all as specified and as directed.

Taking down old plate rack and refixing new stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified and directed.

S&F Counter top wash hand basin whiteflat back, size 510mmX410mmX150mm including couplings, waste pipe, connections and all necessary fittings complete all as specified and as directed. Make: Prayag Catpart No-4715 or quivalent make.

S&F Vitreous China wash hand basin whiteflat back, size 550x400mm including couplings, waste pipe, connections all fittings complete all as specified and as directed.

S&F 15mm bore pillar taps of Swan neck type CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and as directed. Make: Prayag Catpart No-6314N or quivalent make.

S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat and cover for pedestal pan with complete all as specified and as directed.

S&F vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs complete all as specified and as directed.

Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long with brass nuts and washers complete all as specified and as directed.

S&F brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed. Make : Prayag/Parryware or equivalent make.

S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and as directed. Make : Prayag/Parryware or equivalent make.

S&F brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as specified and directed Make: Prayag Catpart No-6675 or quivalent make.

S&F brass CP shower rose with arms 75 mm size fixed complete all as specified and as directed.

S&F15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs complete all as specified and as directed. Make: Prayag/Parryware or equivalent.

S&F 15 mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and as directed. Make : Prayag/Parryware or equivalent.

S&F concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.

S&F Chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and as directed.

S&F Sheet glass shelf assembly for WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long in repairs complete all as specified and as directed.

S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and as directed.

S&F Towel ring for WHB consisting chromium plated complete all as specified and as directed.

S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats and fixed in complete all as specified and as directed.

S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and as directed.

S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, double (double Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

M&L Hardcore of gauge nexc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to surface complete all as specified and as directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. complete all as specified and as directed.

Material and labour for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as specified and as directed.

M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or complete all as specified and as directed.

Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling complete all as specified and as directed.

Removing Concrete debris material exc. 1.5 m but n.exc 5km and depositing where directed complete all as specified and as directed.

M&L for Preparing Old steel and iron surfaces of any description over 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed.

M&L for Preparing New wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for Preparing Old wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F CP Bibtap 15mm bore for Kitchen sink regular spout with flange of Make: Prayag, Catpart No 6616 or equivalent make complete all as specified and as directed.

S&F 32mm CP Bottle traps for washbasin outlet Make: Prayag or equivalent make complete all as specified and as directed.

E/M PORTION Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and as directed.

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit of adequate size concealed type with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and as directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

One light / fan point controlled by two, two way switch

All as per item No. 2 here-in-before but with 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board complete all as specified and as directed.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and as directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular switch 6 Amp, two way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular fan regulator 120 W 2 module complete all as specified and as directed.

S & F buzzer, ding dong AC 230 Volt single pole complete all as specified and as directed.

S & F in repairs earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per complete all as specified and as directed.

Material and labour for Disconnecting of tube light fittings and refixing the same after complete wiring complete all as specified and as directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED/CFL lamp fitting complete all as specified and as directed.

Taking down distribution boards / main switches of any type, size and capacity complete all as specified and as directed.

Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and as directed.

S & F sheet metal enclosure powder painted for vertical type MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and as directed.

Supply and fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and as directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and as directed.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces complete all as specified and as directed.

M/L for Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and as directed. Note: 4 runs of cable and one run earth wire and conduit / Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified and as directed. Note: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

M&L for cutting round holes suitable for fixing of exhaust fan of size 300 mm into through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and as directed.

Supply and fixing of wall lamp LED 10 Watt Sleek & Modern design 220 V decorative type with all accessories complete all as specified and as directed.

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 50 sqmm 3.5 core complete all as specified and as directed.

Excavating in trenches, hard/dense soil n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10sqm on plan and n exc 1.5m in depth and getting out. In hard/dense complete all as specified and as directed.

Returning, filling in, Hard / Dense soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Supply and spreading clean, fine, dry river sand in trenches for cushioning of under ground cable / inside transformer yard complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

Supply and laying un-reinforced pre-cast concrete cable covers, Class LV, Type 1, flat, of size 250 x 150 x 40 mm for cable protection complete all as specified and as directed.

Supply, Install, testing & commissioning factory made indoor type dust and vermin proof Feeder pillar panel board cubical double door hinged type compartmentalized of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3 mm thick machine pressed grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete including 4 poles copper bus bar of suitable size mounted on porcelain insulators and enclosed in chamber made out of 2mm thick CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters and comprising complete all as specified and as directed. of the following :-

(i) in comming MCCB 125 Amp, 36 KA, 4 Pole 415 Volt - 01 Nos

(ii) Out going MCB SP 6-32 Amp, 10 KA 4 Pole 415 Volt, - 14 Nos

(ii) Copper bus bar for 3 Ph & Neutral 200 Amp- 01 Set

(iii) Panel should have provision and space to install four no of 3 phase electric meters.Electric wiring from outgoing MCBs to Electric meters to be provided. Electric meters will be supplied by MES. Outgoing Supply from electric meter to main MCB DB TPN 4 Way Can be measured separatley

(vi) Phase indicator neon lamps for 3 Ph -01 Set

Supply and fixing of electric chimney capacity of Air flow of 1250 Cum / hr of size of 90 cm specifications of heat auto clean with motion sensor, Auto off function, touch sensor control, brushless DC motor 9 speed control, oil collector tray, electric lights LED, filter less chimney complete all as specified and as directed.

Supply and fixing of PVC pipe of 100 mm size including bends, reducer etc and making good disturbed surface matching with existing surface complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and as directed.

Saiansh Associates (BID ID -3120969)

saradhi construction combines (BID ID -3121957)

BHEEMRAO PATIL CONTRACTOR (BID ID -3126770)

harshraj and co (BID ID -3131016)