PLINTH PROTECTION OF RIVER SIDE WALL AND REPLACEMENT OF CONCERTINA COIL FENCING AT TAJ MAHAL, AGRA

Amount

Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of T' or 'L' iron or pipe. (Rate Including GST).

Dismantling concrete and stacking within 50 metres lead in base of R.C.C of fencing posts avg. size 0.45 m x 0.45 m x 0.50 m. (Rate Including GST).

Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. (Rate Including GST).

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed in pits near dashhara ghat and river side. (Rate Including GST).

Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering, shuttering and mixed with coloring pigment for matching the stone shade. (Rate Including GST).

Random rubble masonry with hard stone (Departmental collected from Khan-I-Alam side, River side and Agra Fort by tractor trolley and manual labour including preparing by old stone slab) in foundation up to plinth level with cement mortar 1:6 (1 cement : 6 coarse sand). (Rate Including GST).

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) in coping, including mixed coloring pigment matching to original. (Rate Including GST).

Supplying at site Angle iron post & strut, flat of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10 mm dia. etc. and top to be split and bent at 45 degree angle complete. (Rate Including GST).

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed with nut and bolt 10 mm dia with washer on angle iron post including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. (Rate Including GST).

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre open able length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). (Rate Including GST).

Painting with Synthetic enamel paint of approved brand and manufacture in all shades to give an even shade on new m s iron work and priming coat before painting. (Rate Including GST).

Providing & fixing dome shape porta cabin for security guard, required 1 no. windows for ventilation, 1 no. window for Air cooler, 1 no. door for enty and exit and in porta cabin (size 3.05 m dia and 2.75m. height on inner portion of required colour as per specification given by department. (Including GST) As Per Specification - A - Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. = 838.21 Kg. B- Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. = 50 Kg. C- Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer using M.S. angels 40x40x6 mm for diagonal braces. = 2.40 Sqm. D- Providing and fixing Pre -laminated medium density fiber board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587. = 42.58 Sqm E- Salwood frame = 0.15 Cum F- Earth work in excavation = 1.89 Cum G- Cement concrete 1:3:6 ratio(1 cement, 3 C. sand and 6 Stone aggregate 20mm size) = 0.81 Cum H- Brick work with 1:4 ratio ( 1 cement and 4 C. sand ) = 0.63 Cum I- Electric fitting in porta cabin with materials including labour charges -2 Nos. tube light, 2 Nos. power point, use 2.5 mm copper wire for light and 4 mm for power, 5 Nos light in out & in, Insulation materials. J - Providing 1.00 mm thick with zinc coating not less than 275 gm/m² corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purloins, rafters and trusses and including cutting to size and shape wherever required. = 12.96 Sqm.(Rate Including GST).

20 mm cement plaster on brick wall of mix: 1:4 ratio (1 cement: 4 coarse sand) and coloring pigment to match as per original including dismantling old & decayed cement plaster. (Rate Including GST).

Supply and laying underground electric aluminum cable 16mm x 4core Havells Armored (Rate Including GST).

Supply and fixing parking light with M. S. iron pole 4' height 2" dia painted fixed with 12 watt LED (Havells brand) in each pole. (Rate Including GST).

Electric fitting with 2.5 mm copper wire through HDPE Pipe 25mm dia fitting for 50 nos. parking light fixed with shadle or clamp including make separate circuit for 5 parking light. Use 10 nos. MCB 10 to 32 amp. with box complete with fitting of M.S. busbar of required capacity. (Rate Including GST).

Supply and fixing 120 watt LED light for focus (Rate Including GST).

Shifting of old porta cabin from river side to store size 12’x10x and height 9’ (Rate Including GST).

Shifting of Morcha including fixing on other place required by CISF size 3’x3’x5’ (Rate Including GST).

M/S HARISH SHARMA