Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC RAHEJA NIWAS 243 GHORPADE PETH PUNE 411 042 | PUNE | PUNE | MAHARASHTRA | 411042 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹43.8 L+₹7.3 L (20.1%)Rejected-Finance | L2 | Rejected-Finance Other than L1 bidder | |
| 3 | L3₹44.1 L+₹7.6 L (20.9%)Rejected-Finance DOOR NO 43 2 BESIDES VIZAG DEFENCE ACADEMY 104 AREA KAPPARADA VISAKHAPATNAM 530013 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530013 | L3 | Rejected-Finance Other than L1 bidder | |
| 4 | L4₹45.4 L+₹9.0 L (24.5%)Rejected-Finance H NO 19 6 243 1 NGO S COLONY SHIV NAGAR NORTH BIDAR 585401 | BIDAR | KARNATAKA | 585401 | L4 | Rejected-Finance Other than L1 bidder | |
| 5 | L5₹46.4 L+₹9.9 L (27.1%)Rejected-Finance 94A APR COLONY BILHARI JABALPUR MP | JABALPUR | MADHYA PRADESH | 482020 | L5 | Rejected-Finance Other than L1 bidder |
| Sl No | Description | Qty | Unit | Mahesh Traders L1 | M/S DIVIJA BUILDERS L2 | M/S C MALLIAH & SONS L10 | Ravi Enterprises L5 | Mavee Syndicate L3 | PAVAN ENTERPRISES L6 | Anjana corporation L7 | hari enterprises L9 | RAMESH CONSTRUCTION COMPANY L4 | B Sreepathy Rao L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00ChairTubular steel with Arms (FD-75(M)/FD-75) | |||||||||||||
| 1.01 | Repair to chair tubular steel with arms by dismantling old seat and back frame & replacing with new seat and back frame made out of seasoned teak wood duly canned with cane plastic 2mm wide, 0.5mm thick and border with cane plastic 4mm wide, 0.5mm thick in Godrej pattern fixed on the frame with 4 Each steel screws with washer of appropriate size as per sample kept in furniture yard. Frame shall be painted with synthetic enamel paint OG colour and wooden surfaces shall be painted in black color matching the existing after properly smoothening the surfaces with sand paper all as specified and directed by Engineer-in-Charge. | 250 | Each | 600 ₹1,50,000 | 460 ₹1,15,000 | 550 ₹1,37,500 | 500 ₹1,25,000 | 450 ₹1,12,500 | 500 ₹1,25,000 | 400 ₹1,00,000 | 512 ₹1,28,000 | 365 ₹91,250 Lowest | 500 ₹1,25,000 |
| 1.02 | Dismantling of old unsv wooden arm rests shall be replaced with the new ones made with first class hard teak wood. | 180 | Each | 50 ₹9,000 | 36 ₹6,480 Lowest | 80 ₹14,400 | 70 ₹12,600 | 65 ₹11,700 | 60 ₹10,800 | 82 ₹14,760 | 78 ₹14,040 | 245 ₹44,100 | 80 ₹14,400 |
| 1.03 | Removing old unsv & S & F Flat iron, 15x3mm of two each duly welded beneath the seat shall be provided. | 26 | Each | 20 ₹520 | 40 ₹1,040 | 25 ₹650 | 20 ₹520 | 15 ₹390 Lowest | 20 ₹520 | 26 ₹676 | 21 ₹546 | 105 ₹2,730 | 25 ₹650 |
| 1.04 | Removing old unsv & S & F new Rubber/PVC shoes/caps/plugs wherever required. | 700 | Each | 5 ₹3,500 | 3.6 ₹2,520 Lowest | 6 ₹4,200 | 5 ₹3,500 | 5 ₹3,500 | 5 ₹3,500 | 8 ₹5,600 | 5 ₹3,500 | 10 ₹7,000 | 6 ₹4,200 |
| 2.00Chair Tubular steel without Arms (FD-75/FD-75(M)) | |||||||||||||
| 2.01 | Repair to chair tubular steel with arms by dismantling old seat and back frame & replacing with new seat and back frame made out of seasoned teak wood duly canned with cane plastic 2mm wide, 0.5mm thick and border with cane plastic 4mm wide, 0.5mm thick in Godrej pattern fixed on the frame with 4 Each steel screws with washer of appropriate size as per sample kept in furniture yard. Frame shall be painted with synthetic enamel paint OG colour and wooden surfaces shall be painted in black color matching the existing after properly smoothening the surfaces with sand paper all as specified and directed by Engineer-in-Charge. | 250 | Each | 450 ₹1,12,500 | 450 ₹1,12,500 | 545 ₹1,36,250 | 500 ₹1,25,000 | 450 ₹1,12,500 | 500 ₹1,25,000 | 400 ₹1,00,000 | 543 ₹1,35,750 | 245 ₹61,250 Lowest | 500 ₹1,25,000 |
| 2.02 | Removing old unsv & S & F Flat iron, 15x3mm of two each duly welded beneath the seat shall be provided. | 30 | Each | 20 ₹600 | 45 ₹1,350 | 25 ₹750 | 20 ₹600 | 15 ₹450 Lowest | 25 ₹750 | 30 ₹900 | 20 ₹600 | 105 ₹3,150 | 25 ₹750 |
| 2.03 | Removing old unsv & S & F new Rubber/PVC shoes/caps/plugs wherever required. | 800 | Each | 5 ₹4,000 | 4 ₹3,200 Lowest | 6 ₹4,800 | 5 ₹4,000 | 5 ₹4,000 | 5 ₹4,000 | 8 ₹6,400 | 4 ₹3,200 Lowest | 8 ₹6,400 | 6 ₹4,800 |
| 3.00ALMIRAH LARGE STEEL (FD-1031) | |||||||||||||
Tender Value
₹55.0 L
EMD Value
₹1.1 L
Closing Date
18 Oct 2025, 6:00 pmClosed
CWE (Army) Secunderabad
Commander Works Engineers Mudfort, MES Office Complex Secunderabad-500 003
REPAIR/MAINTENANCE OF STEEL ITEMS OF FURNITURE OF MARRIED AND OTM ACCNS OF BSO (SOUTH) UNDER GE (SOUTH) SECUNDERABAD.
2025_MES_731936_1
82153
Open Tender
Civil Works - Others
Item Rate
180 days
Secunderabad
As per NIT
7 documents required · 7 mandatory
₹1,000
GE(SOUTH) SECUNDERABAD
₹1.1 L
Yes
10 Dec 2025
20 Sept 2025
25 Oct 2025
20 Sept 2025
18 Oct 2025
11 Oct 2025
Amount
ChairTubular steel with Arms (FD-75(M)/FD-75)
Repair to chair tubular steel with arms by dismantling old seat and back frame & replacing with new seat and back frame made out of seasoned teak wood duly canned with cane plastic 2mm wide, 0.5mm thick and border with cane plastic 4mm wide, 0.5mm thick in Godrej pattern fixed on the frame with 4 Each steel screws with washer of appropriate size as per sample kept in furniture yard. Frame shall be painted with synthetic enamel paint OG colour and wooden surfaces shall be painted in black color matching the existing after properly smoothening the surfaces with sand paper all as specified and directed by Engineer-in-Charge.
Dismantling of old unsv wooden arm rests shall be replaced with the new ones made with first class hard teak wood.
Removing old unsv & S & F Flat iron, 15x3mm of two each duly welded beneath the seat shall be provided.
Removing old unsv & S & F new Rubber/PVC shoes/caps/plugs wherever required.
Chair Tubular steel without Arms (FD-75/FD-75(M))
Repair to chair tubular steel with arms by dismantling old seat and back frame & replacing with new seat and back frame made out of seasoned teak wood duly canned with cane plastic 2mm wide, 0.5mm thick and border with cane plastic 4mm wide, 0.5mm thick in Godrej pattern fixed on the frame with 4 Each steel screws with washer of appropriate size as per sample kept in furniture yard. Frame shall be painted with synthetic enamel paint OG colour and wooden surfaces shall be painted in black color matching the existing after properly smoothening the surfaces with sand paper all as specified and directed by Engineer-in-Charge.
Removing old unsv & S & F Flat iron, 15x3mm of two each duly welded beneath the seat shall be provided.
Removing old unsv & S & F new Rubber/PVC shoes/caps/plugs wherever required.
ALMIRAH LARGE STEEL (FD-1031)
Removing unsv & S & F new shelves as per existing shelves all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F new Brass locks, 6 levers Godrej/Harrison pattern of steel with duplicate keys & hole cover.The keys & lock shall have embedded similar numbers for identification.
Removing unsv & S & F chrome plated handles 4” grip as per sample.
Removing unsv & S & F new 3 way locking assembly.
Removing of old unsv, rusted, missing lock cover and S & F new lock cover.
Removing of old unsv clamps/clips and S & F new clamps/clips as per existing shape and size.
Removing of old unsv & S & F new steel butt hinges.
Removing unsv & S & F new legs.
M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of OG/Smoke grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
ALMIRAH LARGE STEEL 1/2H x 1/2SH (FD/E6/MAP/18)(FD-1033)
Removing unsv & S & F new shelves as per existing shelves all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F new Brass locks, 6 levers Godrej/Harrison pattern of steel with duplicate keys & hole cover.The keys & lock shall have embedded similar numbers for identification.
Removing unsv & S & F chrome plated handles 4” grip as per sample.
Removing unsv & S & F new 3 way locking assembly.
Removing of old unsv, rusted, missing lock cover and S & F new lock cover.
Removing of old unsv clamps/clips and S & F new clamps/clips as per existing shape and size.
Removing of old unsv & S & F new chrome plated hanging rod.
Removing of old unsv & S & F new steel butt hinges.
Removing unsv & S & F new legs.
Removing unsv & S & F new shutter for locker as directed by Engineer-in-Charge.
M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of OG/Smoke grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
ALMIRAH MEDIUM STEEL (FD-1032)
Removing unsv & S & F new shelves as per existing shelves all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F new Brass locks, 6 levers Godrej/Harrison pattern of steel with duplicate keys & hole cover.The keys & lock shall have embedded similar numbers for identification.
Removing unsv & S & F chrome plated handles 4” grip as per sample.
Removing unsv & S & F new 3 way locking assembly.
Removing of old unsv, rusted, missing lock cover and S & F new lock cover.
Removing of old unsv clamps/clips and S & F new clamps/clips as per existing shape and size.
Removing of old unsv & S & F new steel butt hinges.
Removing unsv & S & F new legs.
M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of OG/Smoke grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
BOOK CASE STEEL GLAZED (FD-1028)
Removing unsv & S & F shelves with appropriate nuts bolts/clamps/clips & shutters with appropriate nuts bolts/ steel butt hinges all as specified and directed by Engineer-in-Charge.
Removing unsv & S & F new brass locks of Godrej/Harrison with duplicate keys and hole cover.
Removing unsv & S & F handles as per sample.
Removing unsv & S & F glass of the shutters and smoothening the movement thereof.
M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of GREY/OG colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
LOCKER BEDSIDE STEEL (FD-1029/257)
M & L for Denting & painting of locker with synthetic enamel paint of OG/Smoke grey colour after preperation of surface by cleaning & smoothening with electric grinder & applying putty/primer where necessary complete all as specified/shown on drg & directed by Engr-in-Charge.
Removing and replacing unsv & S & F new chrome plated hasp & staples 75mm long as per drg.
Removing unsv & S & F new chrome plated handles 100mm long as per drg.
S & F Chrome Plated conduit 19/20mm dia hanging rod with brackets16 guage as per drg.
Removing of old unsv & S & F new steel butt hinges.
Removing unsv & S & F legs.
CHAIR REVOLVING EXECUTIVE(HIGH/LOW BACK),CHAIR REVOLVING WITH & W/O ARMS (Trade Pattern)
Removing unsv & S & F seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & colour.All as directed by Engr-in-Charge.(Note: Rate of tapestry cloth should not be less than Rs 175/- per meter)
Removing unsv & S & F new twin castor wheels of 50mm as per the approved sample.
Removing unsv & S & F new black integral skin Polyurethene reinforced with MS insert handle matching the previous all in shape,size,material & quality.
Removing unsv & S & F new Gas lift mechanism as per the approved sample.
Removing unsv & S & F new pedestal assembly as per the approved sample.
Removing unsv & M & L for servicing synchro tilting mechanism.
CHAIR COMPUTER (FD/E6/MAP/01)
Removing unsv & S & F seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & colour.All as directed by Engr-in-Charge.(Note: Rate of tapestry cloth should not be less than Rs 175/- per meter)
Removing unsv & S & F new twin castor wheels of 50mm as per the approved sample.
Removing unsv & S & F new black integral skin Polyurethene reinforced with MS insert handle matching the previous all in shape,size,material & quality.
Removing unsv & S & F new Gas lift mechanism as per the approved sample.
Removing unsv & S & F new pedestal assembly as per the approved sample.
Removing unsv & M & L for servicing synchro tilting mechanism.
TABLE OFFICE OFFR STEEL (FD-1003)
Repair to table office clerk steel by replacing top of pre-lminated MDF board 18mm thick exterior grade as approved with both sides lamination with PVC edge band tape 1.6 to 2mm thick with strong bonded chemical adhesive all around.
Removing old unsv & S & F new legs of mild steel square tube 25mm as per existing shape and size.
Removing unsv & S & F new drawers on the right side of table
Removing unsv & S & F new brass locks for drawers make Godrej/Harrison.
Removing old unsv & S & F new Hard Rubber/PVC shoes as directed.
Removing unsv & S & F new shutter on the left side of the table
Welding to broken joints as specified and directed.
All steel surfaces of table shall be painted with two coats of synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper & applying primer where necessary.
TABLE OFFICE CLK STEEL (FD-1004)
Repair to table office clerk steel by replacing top of pre-lminated MDF board 18mm thick exterior grade as approved with both sides lamination with PVC edge band tape 1.6 to 2mm thick with strong bonded chemical adhesive all around.
Removing old unsv & S & F new legs of mild steel square tube 25mm as per existing shape and size.
Removing old unsv & S & F new stiffener of mild steel square tube 25mm as per existing shape and size.
Removing unsv & S & F new drawers on the right side of table
Removing unsv & S & F new brass locks for drawers make Godrej/Harrison.
Removing old unsv & S & F new Hard Rubber/PVC shoes as directed.
Welding to broken joints as specified and directed.
All steel surfaces of table shall be painted with two coats of synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper & applying primer where necessary.
CHAIR VERANDAH (FD-359,256)
Removing unsv & M & L for recanning the chair with plastic cane 3.5mm to 4mm wide, 0.5 mm thick half round, white colour complete all as specified & directed.Canning shall be done only after painting.
M & L for painting the frame of the chairs by one coat of synthetic enamel white of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder complete all as specified & directed.
Welding to broken joints as specified and directed by Engr-in-Charge.
Removing unsv & S & F new PVC shoes .
CHAIR VERANDAH (FD/MAP-II/06)
Removing unsv & S & F new PVC/PPCP seat and back complete all as specified & directed. Thickness of PVC/PPCP seat & back should be 4mm thick weight not less than 1.85kg. Make: AMKO/HARMONY. Fixing of PVC/PPCP seat & back should be done after painting.
M & L for painting the frame of the chairs by one coat of synthetic enamel white of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder complete all as specified & directed.
Welding to broken joints as specified and directed by Engr-in-Charge.
Removing unsv & S & F new PVC shoes .
CHARPOY IP HARD TOP (FD/MAP-II/01)
Removing old UNSV plywood and S & F of new plywood made out of 12mm thick plywood BWR commercial grade with suitable nuts and bolts. Make:Greenply /Century/Kitply/Archid
Welding to broken joints as specified and directed by Engr-in-Charge.
Removing old unsv & S & F new nuts of long rail as directed by Engr-in-Charge.
Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes
Scratching the steel frame ,filling putty & scratching it with an electric grinder to smoothen the uneven surface & spray painting it in black colour complete all as specified and as directed.
TABLE 3'X2' WITH DRAWER STEEL (FD-1008)
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade as approved both side lamination with halfround PVC edging thickness 1.6 to 2mm matching the color of the top.
Removing unsv & S & F new drawers & cabinet all as per drawing.
Removing old unsv & S & F new legs of mild steel square tube 25mm as per existing shape and size.
Removing old unsv & S & F new stiffener of mild steel square tube 25mm as per existing shape and size.
Removing unsv & S & F new brass locks for drawers make Godrej/Harrison.
Removing unsv & S & F hard rubber shoes to legs
Welding to broken joints as specified and directed by Engr-in-Charge.
M & L for painting all over the steel structure with synthetic enameled paint of OG/smoke grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
TABLE 3'X2' WITHOUT DRAWER STEEL (FD-1007)
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade as approved both side lamination with halfround PVC edging thickness 1.6 to 2mm matching the color of the top.
Removing old unsv & S & F new legs of mild steel square tube 25mm as per existing shape and size.
Removing old unsv & S & F new stiffener of mild steel square tube 25mm as per existing shape and size.
Removing unsv & S & F hard rubber shoes to legs
Welding to broken joints as specified and directed by Engr-in-Charge.
M & L for painting all over the steel structure with synthetic enameled paint of OG/smoke grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.
CHAIR WRITING (FD/E6/MAP/12)
Removing unsv & S & F seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & colour.All as directed .(Note: Rate of tapestry cloth should not be less than Rs 175/- per meter)
Removing old UNSV & S & F new Rubber/PVC shoes/stopper as directed.
Removing unsv & S & F new black integral skin Polyurethene reinforced with MS insert handle matching the previous all in shape,size,material & quality.
TABLE 900X900mm (FD-1009)
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade as approved both side lamination with halfround PVC edging thickness 1.6 to 2mm matching the color of the top.
Removing old unsv & S & F new legs of mild steel square tube 25mm as per existing shape and size.
Removing unsv & S & F hard rubber shoes to legs
Welding to broken joints as specified and directed.
M & L for painting all over the steel structure with synthetic enameled paint of OG/smoke grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed.
TEAPOY VERANDHA (FD-383/255)
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade as approved both side lamination with halfround PVC edging thickness 1.6 to 2mm matching the color of the top.
Removing old unsv & S & F new legs of mild steel conduit pipe 20mm as per existing shape and size.
Removing old unsv & S & F new MS frame of 25 x 3mm as per existing shape and size.
Removing old unsv & S & F new MS flat iron of 25 x 3mm as per existing shape and size.
Removing unsv & S & F hard rubber/PVC shoes to legs
Welding to broken joints as specified and directed.
Material & labour for painting all over the steel structure with synthetic enameled paint of WHITE colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed.
TEAPOY VERANDHA (FD/E6/MAP/17)
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade as approved both side lamination with halfround PVC edging thickness 1.6 to 2mm matching the color of the top.
Removing old unsv & S & F new MS frame of 18mm as per existing shape and size.
Removing old unsv & S & F new MS stiffener of 18mm as per existing shape and size.
Removing old unsv & S & F new MS bar of 05mm dia as per existing shape and size.
Welding to broken joints as specified and directed.
Removing unsv & S & F hard rubber/PVC shoes to legs
Material & labour for painting all over the steel structure with synthetic enameled paint of Black colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge.
BED HARD MAP (FD/E6/MAP/08(R))
Removing old UNSV plywood and S & F of new plywood made out of 12mm thick plywood BWR commercial grade with suitable nuts and bolts. Make:Green ply /Century/Kitply/Archid
Welding to broken joints as specified and directed by Engr-in-Charge.
Removing old unsv & S & F new pre laminated MDF board of size 18mm with halfround PVC edging of 1.6 to 2mm thick for head board as directed by Engr-in-Charge.
Removing old unsv & S & F new pre laminated MDF board of size 18mm with halfround PVC edging of 1.6 to 2mm thick for foot board as directed by Engr-in-Charge.
Removing old unsv & S & F new nuts of long rail as directed by Engr-in-Charge.
Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes
Scratching the steel frame ,filling putty & scratching it with an electric grinder to smoothen the uneven surface & spray painting it in black colour complete all as specified and as directed.
CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05)
Removing of old UNSV blowplastic one piece seat & back and S & F of new blowplastic one piece seat & back
Removing of old UNSV hand rest board and S & F of new hand rest board made out of 18mm thick prelaminated MDF board with halfround PVC edging.
Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes
Welding to broken joints as specified and directed by Engr-in-Charge.
Painting to the steel structure in BLACK color after removing the old wornout paint all as specified by Engr-in-Charge,
TABLE COMPUTER (FD/E6/MAP/03)
Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade as approved both side lamination with halfround PVC edging thickness 1.6 to 2mm matching the colour of the top.
Removing unsv & S & F bottom having pre-lminated MDF board 18mm thick exterior grade in shade as approved both side lamination with halfround PVC edging thickness 1.6 to 2mm matching the colour of the bottom.
Removing of Keyboard holder and Supply & Fixing of keyboard holder with 18mm thick pre laminated MDF board exterior grade matching with the top of table with 1.6 to 2.0 mm thick PVC edging of approved shades make:- Rehau, Pegasus, Kynex shall be fixed on all around sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.
Removing of mouse pad holder and Supply & Fixing of mouse pad holder with 18mm thick pre laminated MDF board exterior grade matching with the top of table with 1.6 to 2.0 mm thick PVC edging of approved shades make:- Rehau, Pegasus, Kynex shall be fixed on all around sides with strong bonded chemical adhesive through hot pressed machine as specified and directed
Removing of drawer and Supply & Fixing of drawer with 18mm thick prelaminated MDF board exterior grade matching with the top of table with 1.6 to 2.0 mm thick PVC edging of approved shades make:- Rehau, Pegasus, Kynex shall be fixed on all around sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.
Removing of old unsv telescopic channels and Supply & Fixing of high quality telescopic channels to the mouse pad board/ Key board holder & drawer of the tables.
Scratching the steel frame ,filling putty & scratching it with an electric grinder to smoothen the uneven surface & spray painting it in black colour complete all as specified and as directed.
Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes bush stud type.
Table bedside steel (FD/E6/MAP/15(R))
Removing of old unsv & S &F new top having 18mm thick pre laminated MDF board with both side laminated with PVC halfround edging matching the top as approved by Engr-in-charge.
Removing of old unsv & S &F new sides having 18mm thick pre laminated MDF board with both side laminated with PVC halfround edging matching thr sides as approved by Engr-in-charge.
Removing of old unsv & S & F new ply of 06mm thick BWR for back as shown on drawing.
Removing of old unsv & S & F new ply of 06mm thick BWR for drawer bottom as shown on drawing.
Removing of old unsv & S & F new ply of 12mm thick BWR for drawer sides as shown on drawing.
Removing unsv & S & F new front of upper drawer having 18mm thick MDF board with both side laminated with PVC edging matching the drawer as approved.
Removing unsv & S & F new front of lower drawer having 18mm thick MDF board with both side laminated with PVC edging matching the drawer as approved
Removing old unsv & S & F new legs of mild steel square tube 18mm as per existing shape and size.
Removing unsv & S & F new CP handles as directed by Engr-in-charge.
Removing of old unsv & S & F new high quality telescopic channels to the drawer of the table
Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes bush stud type.
Scratching the steel frame ,filling putty & scratching it with an electric grinder to smoothen the uneven surface & spray painting it in black colour complete all as specified and as directed.
M/S DIVIJA BUILDERS (BID ID -3451319)
Mavee Syndicate (BID ID -3454298)
RAMESH CONSTRUCTION COMPANY (BID ID -3453864)
Ravi Enterprises (BID ID -3454019)
PAVAN ENTERPRISES (BID ID -3454369)
Anjana corporation (BID ID -3454396)
B Sreepathy Rao (BID ID -3453826)
hari enterprises (BID ID -3454640)
M/S C MALLIAH & SONS (BID ID -3453795)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Tenderpages82153.pdf
Tender Documents • 0.60 MB
BOQ_819472.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .