General Fund 2023-24 Construction Of Public Toilet Building

Amount

Earthwork excavation in all soils and subsoils except hard rock requiring blasting with initial lead and lift as initial lead of 10.0 m and lift 0f 2.00 m including re-filling the sides of foundation in layer of 15cm. thick watering ramming depositing the surplus earth in the premises as directed by the departmental officers etc., complete complying with standard specification.

Cement concrete 1:4:8 using 40mm ISS size hard broken granite metal for foundation and flooring including de-watering wherever necessary and laid in layers not more than 15cm. thick to required thickness , including cost and conveyance of materials to work site & labour charges complete with standard specifications

Supplying fabricating and placing in position of steel rods using TMT Steel ISI including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications

Supplying and erecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over (silver oak joists ) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification .

Column

Toilet Roof

Plinth Beam

Reinforced cement concrete in 1:1½:3 [one cement and one and half sand and four the aggregate ] using 20 mm size IRC grade machine crushed chips and excluding cost of reinforcement and centering works and including the cost of mixing, laying , curing etc.,complete complying with standard specification .

Brick work In CM 1:5 mix using best country bricks of size 23cm x 11.50cm x 5cm having 350kg/cm2 compressive strength and 15% or less water absorbentin the period of 24hours immersement and confirming to ISI specifications.and using the screened sand and all the materials should be approved by the competent technical authorities etc complete complying with standard specification.

Supply and fixing of RCC precast jally of 5cm thick in cement concrete 1:2:4 (one cement two sand and four aggregate)mix using 20mm ISS HBG metal, including cost and conveyance of all materials to site laboure charges, cost and providing mould charges etc.complete

Plastering with cement mortar 1:3 ( one cement and Three sand) 20mm thick mixed with water proofing compound at 2% by the weight of cement used etc., complete complying with standard specifications

Supplying and fixing in position of Iron grills of required size and 2 Nos of vertical at center with b flats diagonally to the existing open space for grills into necessary hold fast conveyance and one coat of primer etc., complete for Windows and others

Supplying and filling well gravel in layers of not more than 15 cm thick well watered rammed and con-solidated etc., complying with standard specifications

Plastering with CM 1:5 (One cement and Five sand) mix 12 mm thick including finishing cost and conveyance of all materials to work site and all labour charges watering, curing and and all other incidental charges etc., complete complying with standard specifications

Special Ceiling Plastering in cement mortar 1:3 mix 10mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection, dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and laying and jointing of PVC pipes ( 6kg / Sqcm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting, fixing to PVC Specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - wood plugs, PVC clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantled portion to original condition with necessary brick scaffolding charges

25mm OD PVC pipe 10ksc

32 x 25mm OD PVC Reducer

CP Angle Cock Tap

32mm OD PVC pipe 10ksc

32mm OD PVC Tee

32mm OD PVC End Cap

90mm OD PVC pipe 4ksc

90mm OD PVC Cowl

110mm OD PVC pipe 4ksc

110mm OD PVC End cap at Inspection Hole Pipe at Channel East End

110mm OD PVC Cowl at outlet

HDPE tank 1000ltrs Capasity

Dadooing the wall glazed tiles of size 305mm x 200mm x 6mm size of approved make and quality and colour 1set in cement mortor 1:2 (one cement and two sand) over 10mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with plain/design Antiskirt ceramic tiles (colour shade as directed) of size 305mm x 305mm x 6mm in all floors over a base layer of cement mortor 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement

Supplying and fixing in position of best approved colour design and quality upvc with frame of size 65mm x 50mm with neccessary 'U' or 'J' bolts, bitumen washers and cutting the FRP sheets to the required size etc.,complete

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated SC .unsheathed cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5 Amps F.T switch with painting of suitable colour for open PVC light point/ Fan point (For Electronic Regulator)5 point per coil) SD-19

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated unsheathed Copper conductor cable of 1100 V grade on suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box 150mmx100mmx75mm for 5A 3 pin non interlocking flush type CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point sd -20

White washing two coats using best shellime and preparing the surface fit for white washing as confirming to the Standard Specification

Painting two coats with approved cement paint over one priming coat of Plastic Emulsion paint over cement plastered New Wall surface and ceiling including cost of one priming coat, Cost of all materials, all labour charges, brushes etc, complete as per Standard Specification

Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc, in all floor with two coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with Standard Specification.

supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit sd 125

Supply and run of 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains. SD. 69

Supply and run of 2 of 1.5sq.mm ( 22/0.3) PVC insulated SC Unsheathed Cu. Conductor of 1100v grade on 7/20 GI Bearer wire for Over Head Service connection mains. SD. 64

Supply and Fixing of Following LED Bulb's with ISI mark, etc., complete

5-A LED Bulb

40-A LED Bulb

Supply and Fixing of Following 120W LED Street Light Fitting with LED

Supplying and fixing of 16 Amps DP switch of 500 V with metal glad with fuse and neutral ( side handle ) onsuitable TW board with earth connection only. SD.142

L.G.ARASU