REPAIRS TO WOODEN AND STEEL FURNITURE INCLUDING POLISHING/ PAINITING AND CANNING

Amount

REPAIR TO BED HARD WITH PLY TOP ( FD-246/247) : S&F in replacement of unserviceable top of bed newar to be made of 12 mm thick (7 Ply) commercial plywood , BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with 25 mm long steel screw without having any joints, (Make of ply: Kit Ply/Green ply/Century) shape and size, as per drg and directed by Engr-in-charge.

S&F in replacement of unserviceable long rail, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable short rail, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable stiffener, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg and as directed by Engr-in-Charge.

HEAD REST : Unserviceable outer ply to be replaced by 3 mm thick ply wood one side teak faced and inner side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI marked including teak wood beading all around and 1/2 cut 12 mm dia beading made to shape as shown on drg and directed by Engr-in-Charge.

FOOT REST : All as per Srl Item No. 1.04 above but foot rest.

HEAD REST : Dismantling of unserviceable Head rest of Bed ply top, S&F new Head rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4"x4"x6mm, suitable type of MS screws and as per drg and as directed by Engr-in-Charge

FOOT REST : Dismantling of unserviceable Foot rest of Bed ply top, S&F new foot rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4"x4"x6mm, suitable type of MS screws and as per drg and as directed by Engr-in-Charge

S&F of MS corner bracket in right angled shape of size 4"x4", 6 mm thick with four holes duly painted with black enamel paint after applying the one coat of red oxide be fixed with suitable MS screws to the bed as directed by the Engr-in-Charge.

TABLE DINING FOR 8 PERSONS (FD-273, FD-376) : Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade (Make : Ecoboard/Action Tesa/Novapan) (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top, shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F in replacement unserviceable long rail, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

All as per Srl Item No. 2.01. here-in-before but Short side Rail, shape and size as shown in drg and as directed by Engr-in-Charge.

S&F in replacement unserviceable legs, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

REPAIR TO TEAPOY WOODEN (FD-232/278/382) : Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade (Make : Ecoboard/Action Tesa/Novapan) (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top, shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F in replacement of unserviceable long rail, first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable Short Side Rail, first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement unserviceable legs, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable bottom rails, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable centre stiffeners, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

REPAIR TO TABLE PEG (FD-384/277) : Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade (Make : Ecoboard/Action Tesa/Novapan) (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F in replacement of unserviceable long rail, first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable Short Side Rail, first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement unserviceable legs, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable side/centre stiffeners, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

REPAIR TO TABLE WRITING (FD-275/249) : Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade (Make : Ecoboard/Action Tesa/Novapan) (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top, shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F in replacement of unserviceable Leg, first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable short stiffener, first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in repair door shutters of drawer to be made of 18 mm thick prelaminated MDF board of ext grade edging all around with teak wood beading of 4 mm thick with piano type hinges/MS Hinges with approved SS Handle and locking device, shape and size all as specified in drg and as directed by Engr-in-charge.

S&F drawer to be made of sides and back of 12 mm thick commercial plywood , bottom of 6 mm thick commercial plywood , Front top of 18 mm thick prelaminated ext grade MDF board whatever shown on drg including SS Handles of approved pattern including removing of unserviceable drawer all as directed by Engr-in-Charge.

S&F in replacement of unserviceable back ply, 6mm commercial ply BWR of size as existing and as per drg and as directed by the Engr-in-Charge.

REPAIR TO TABLE CENTRE (FD-274) : Removing of unserviceable top of table , S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F in replacement of unserviceable Leg shall be first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable long rail be first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable top/bottom Side Rail shall be first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable side stiffeners shall be First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable centre stiffeners shall be First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

REPAIR TO ALMIRAH MED STEEL FD-1032/243 : Dismantling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild griding and as directed by the Engr-in-Charge..

S&F shelves to be made of 1 mm thick MS sheet duly painted made shape and size as specified on drg.

Dismantling of unserviceable bushes of locking assembly and S&F new MS bushes of locking assembly as directed by Engr-in Charge.

Dismantling of unserviceable locking assembly with complete mechanism and S&F new MS locking assembly with base plate (Complete mechanism) with upper and lower bars without lock as shown in drg or as directed by Engr-in Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, complete removal of existing coat of paints filling, finishing and painting of Almirah Medium steel with two coats of synthetic enamel paint in dual shade of approved colour (Make: Berger/ Asian Paint/Nerolac) with spray after giving a primer coat with red oxide and as directed by Engr-in-Charge.

REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES FD-1031/133(1)/197(3) : dismantling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild griding and as directed by the Engr-in-Charge.

S&F shelves to be made of 1 mm thick MS sheet duly painted made shape and size as specified on drg as directed by Engr-in-Charge.

dismantling of unserviceable bushes of locking assembly and S&F new MS bushes of locking assembly as directed by Engr-in Charge.

dismantling of unserviceable locking assembly with complete mechanism and S&F new MS locking assembly with base plate (Complete mechanism) with upper and lower bars without lock as shown in drg or as directed by Engr-in Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, complete removal of existing coat of paints filling, finishing and painting of Almirah Large steel with two coats of synthetic enamel paint in dual shade of approved colour (Make: Berger/ Asian Paint/Nerolac) with spray after giving a primer coat with red oxide and as directed by Engr-in-Charge.

REPAIR TO SOFA SET 3 PCS 5 SEATER (FD- 258/281/373)

Arms made of 1st class hard wood (Teak wood)

Wooden batten of seat frame made of 1st class hard wood (Teak wood))

Wooden batten of back frame made of 1st class hard wood (Teak wood))

Front rail of seat of 3 Seater Sofa made of 1st class hard wood (Teak wood))

Side rail of seat of single/three Seater Sofa made of 1st class hard wood (Teak wood))

Front rail of seat of single Seater Sofa made of 1st class hard wood (Teak wood))

12mm thick commercial plywood BWR grade for seat of three seater Sofa, FD - 258

12mm thick commercial plywood BWR grade for seat of Single seater Sofa, FD - 258

Supplying and fixing in replacement foam cushion (ISI Marked IS-1741) (Make : Sleep Well/Kurl-On/Dunlop) 10 Nos in each set for sofa 3 pieces, 5 seater. Size of cushion 22"x21"x4" thick foam of 40 density for seat & back covered with superior quality tapestry cloth of premium quality as approved by GE/Engr-in-charge/User. NOTE: The foam cushion in original packing with warranty card and tapestry cover (with zip opening system) shall be brought separately at furniture yard and after inspection the same shall be fixed.

Removing of old unserviceable tapestry cloth from existing foam cushion, supplying and fixing superior quality tapestry cloth, size of the cover should be 22"x21"x4" with Zip opening system of best quality easy to remove and wash of premium quality as approved by GE to the foam cushion (10 Nos in each set) as per existing. Complete all as directed.

SOFA SET SINGLE SEATER (FD-28258/281) : Supplying and fixing in replacement foam cushion (ISI Marked IS-1741) (Make : Sleep Well/Kurlon/Dunlop) 02 Nos in each set for sofa single seater. Size of cushion 22"x21"x4" thick foam of 40 density for seat & back covered with superior quality tapestry cloth of premium quality as approved by GE/Engr-in-charge. NOTE: The foam cushion in original packing with warranty card and tapestry cover with zip (of best quality) opening system easy to remove and wash shall be brought separately at furniture yard and after inspection the same shall be fixed.

REPAIR TO TABLE DINING FOR 6 PERSONS (FD-273) : Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade (Make : Ecoboard/Action Tesa/Novapan) (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top, shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F in replacement unserviceable long rail shall be First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

All as per Srl item No. 11.01 here-in-before but Short side Rail, shape and size as shown in drg,

S&F in replacement unserviceable legs, First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

REPAIR TO TABLE DRESSING GENTS WITH MIRROR (FD-230) : S&F in repair, unserviceable looking mirror 5mm thick Make : Modi Guard/Atul/Saint Gobain along with new 6 mm thick commercial plywood back of mirror frame including two coats of French Polish to all parts as specified shown on drg as directed by Engineer-in-Charge. Make : Green ply/Archid/Century Ply

S& F new drawers complete as per drawing and as directed by Engineer -in-Charge.

M&L for removing the existing u/s eye hook and S&F new MS eye hook all as specified, complete in all respect at site.

REPAIR TO TABLE DRESSING LADIES WITH MIRROR (FD-251/378) : S&F, in repair, unserviceable looking mirror 5 mm thick Make : Modi Guard/Atul/ Saint Gobain along with new 6 mm thick commercial plywood back of mirror frame all as specified shown on drg as directed by Engineer-in-Charge. Make : Green ply/Archid/Century Ply/Kit Ply

S&F Glass panes of shutters made of 5mm thick plane glass as existing of Make: Modiguard/Saint Gobain with aluminium sliding all as per drg and as directed by Engr-in-Charge.

S&F new 1st Class hard wood (Teak Wood) Frame for 5mm thick mirror of dressing table ladies complete as per drawing and as directed by engr-in-Charge.

S& F new drawers complete as per drawing

REPAIR TO TABLE BED SIDE (FD-276) : Removing of unserviceable back ply of Table Bed side S & F Back ply of 6mm thick commercial plywood BWR grade as directed by Engr-in-Charge. Make : Kit Ply/Bhutan/Green Ply/ Century ply

Removing of unserviceable Left or right side of Table Bed side S & F with prelaminated particle board exterior grade18/19mm thick of approved shade. Make : Green Ply/Novapan/Bhutan Board/Action Tesa

Removing the unserviceable Shelves of table bed side S&F shelves made out of 12mm thick prelaminated particle board exterior grade of approved shade. Make : Green Ply/Novapan/Bhutan Board/Action Tesa.

Removing the unserviceable top of table bed side S&F new top made out of prelaminated particle board exterior grade18/19mm thick of approved shade. Make : Green Ply/Novapan/Bhutan Board/Action Tesa

Removing the unserviceable bottom of table bed side S&F new top made out of prelaminated particle board exterior grade18/19mm thick of approved shade. Make : Green Ply/Novapan/Bhutan Board/Action Tesa.

REPAIR TO CHAIR VERANDAH (FD-256) : Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane of 4.00 mm wide half round cane.

M&L for gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge.

M&L for painting of chair steel frame with two coat of synthetic enamel paint of white shade Make : Berger/Asian paints after removing the rubber shoes, including preparation of old surface by mild grinding, applying a primer coat with red oxide all as directed by Engr-in-Charge.

REPAIR TO HAT STAND WITH MIRROR (FD-233 ) : S & F Peg hook aluminium anodised as per drg.

S&F in replacement of unserviceable mirror with new mirror 5 mm thick of make : Atul/Modiguard/Saint Gobain

M&L for removing the existing u/s eye hook and S&F new MS eye hook all as specified, complete in all respect at site.

M&L in replacement of unserviceable front ply and S&F new ply 3 or 4 mm thick one side teak faced duly polished with french polish.

M&L in replacement of unserviceable Back ply and S&F new ply 3 or 4 mm thick one side teak faced duly polished with french polish.

M&L for removing the existing broken or unserviceable components of wooden furniture items as given here-in-after under item no. 17.01 to 20.02, including preparation, S&F New Ist class hard wood (Teak Wood) including two coats of french polish to all replaced and old existing components complete and to match the original all as specified in drawings and as directed by Engineer-in-Charge :

REPAIR TO CHAIR DINING ( FD - 16 (M) /FD - 279) :

Rear Legs Made of 1st Class hard wood (Teak Wood)

Front legs Made of 1st Class hard wood (Teak Wood)

Stiffeners Made of 1st Class hard wood (Teak Wood)

Bend Stiffeners for back rest Made of 1st Class hard wood (Teak Wood)

Side rails Made of 1st Class hard wood (Teak Wood)

REPAIR TO CHAIR WRITING ( FD - 20 (M) FD - 280) :

Rear Legs Made of 1st Class hard wood (Teak Wood)

Front legs Made of 1st Class hard wood (Teak Wood)

Side rails Made of 1st Class hard wood (Teak Wood)

Arms Made of 1st Class hard wood (Teak Wood)

Stiffeners Made of 1st Class hard wood (Teak Wood)

REPAIR TO CHAIR EASY (FD - 17 (M) FD - 229) :

Legs Made of 1st Class hard wood (Teak Wood)

Side rail for seat Made of 1st Class hard wood (Teak Wood)

Front/Back Rail for seat Made of 1st Class hard wood (Teak Wood)

Arms Made of 1st Class hard wood (Teak Wood)

REPAIR TO STOOL DRESSING CB (FD- 282 ) :

Legs Made of 1st Class hard wood (Teak Wood)

Side/Front rail for seat Made of 1st Class hard wood (Teak Wood)

REPAIR TO BIN SOILD LINEN (FD- 244) : Removing of unserviceable Bottom frame with legs S&F new bottom frame made of hard teak wood well seasoned duly polished to bin solid linen as specified in drg or as directed by Engr-in-Charge.

S&F in replacement of unserviceable front and back ply with new 6 mm commercial ply one side teak faced

S&F in replacement of unserviceable top ply with new 6 mm commercial ply one side teak faced

REPAIR TO TABLE 900X600X760 MM WITHOUT DRAWER (FD-284)

Removing of unserviceable top of table in any position, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

Legs Made of 1st Class hard wood (Teak Wood)

Front Rail Made of 1st Class hard wood (Teak Wood)

side Rail Made of 1st Class hard wood (Teak Wood)

side stiffener lower Made of 1st Class hard wood (Teak Wood)

Centre Stiffener Made of 1st Class hard wood (Teak Wood)

REPAIR TO CHAIR DINING LONG BACK (TP)/FD - 357

S&F in replacement of unserviceable seat and back of chair dining long back and upholstering the same as per existing pattern with seat and back with 50mm(for FD-357)/100 mm(TP) thickness 40 density as specified and as directed by the Engr-in Charge.

S&F in replacement of unserviceable Leg : shall be first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable front rail shall be first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable Side rail shall be first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable lower side stiffener : shall be first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

S&F in replacement of unserviceable centre stiffener : shall be first class hardwood well seasoned teak wood free from cracks and dead knots, shape and size all as per existing/specified in the drg complete all as specified and directed by Engr-in-charge.

Labour for removing the U/S worn out / broken cane & re-canning with new plastic cane of not less than 1.8 mm wide x 0.46mm thick and border caning atleast 3.5mm wide as per Godrej pattern including total scrubbing & cleaning of surfaces for chair dining, chair writing, chair easy, stool dressing, Bin soiled linen, etc. complete all as specified and as shown in drgs. and as directed by Engineer-in-Charge.

Labour for cleaning, mild grinding and preparation of old treated wooden surfaces of any description, filling of cracks with putty and applying two coats of french polish for the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge (including polishing at site)

Bed plywood top FD - 213/246

Book case FD-356

Bin soiled linen FD -15/244

Chair Easy FD - 17/229

Chair Writing FD - 20(M)/280

Chair Dining FD - 16/279/MAP

Table dining 8 pers FD-30/239/273

Table 900x600x760mm w/drawer FD-41/283

Table writing FD - 33/275

Peg table FD - 25/277

Table bed side FD - 28/276

Table dressing Gents FD-230/382/379

Table dressing Ladies FD- 251

Table centre FD-214/274

Side Board FD 26/241

Sofa set 5 seater FD - 281/373/258

Sofa set seater single chair ( FD-281/373/258)

Stool dressing FD 27/252

Hat stand FD-206/233/362

Chair dining with long back (TP)

Teapoy wooden FD-232

S&F wooden corner brackets of size 65x65x25 mm of hard teak wood as directed by the Engr-in-Charge.

S& F in replacement of Unserviceable Knobs/handles with SS Handles of approved quality and as directed by the Engr-in-Charge.

S&F wooden corner brackets of size 65x65x20 mm of teakwood.

Dismantling of existing unserviceable CP handles and S&F new CP handles of approved quality as in Steel Almirah

Dismantling of unserviceable locks of Almirah and S&F new locks of approved brand as specified and shown in drg.

S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete as directed

M&L for dismantling existing unserviceable MS Butt Hinges & S&F new MS Butt Hinges with suitable MS screws as per specification and as per drg. 75 mm long medium, quality of approved pattern complete all as specified and directed by Engr-in-charge.

S&F of SS Knobs of approved quality.

S&F new PVC hard Rubber Shoes, white colour for chairs as per drg or as directed by the Engr-in-Charge.

Techno India Enterprises

Shri Gajanand Enterprises

M/S CHANDER SHEKHAR

SUNIL TRADERS

SMS Enterprises

M/S NEHAL ENTERPRISES