Repair renovation of Live Stock Check post with allied items at bypass Highway near Peaks Showroom

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm.

Providing and fixing of 20 mm thick imported wooden panelling including 2'x2' framework over 12 mm thick plywood of 2nd class budloo wood complete

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more

ding and window edges complete

Providing and fixing of HDMR Minimum 18 MM thick of approved make including all related acccessories like corner/top flashing etc complete including grounds, including screwing complete

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 300x300 mm

proividing and fixing of Buj tile cladding of required pattern shade and design over 20mm thick cement plaster 1:3 mix (1 cement:3corase sand) including jointing with neat cement slurry and side moul

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall: 20 mm dia. nominal bore

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing Gas Water Geyser of specific capacity of approved make complete with Gas Cylinder and necessary Angles Valves, PVC Connection pipes I/C all fixing charges etc complete as approed and directed by Engineer-in Charge

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing of 12mm thick thermal foam of approved make including cost of adhesive complete job as per directions of engineer incharge.

Providing and fixing of Towel Rods of required size as per directions

Providing and fixing of Soap Case as per directions

Drilling of 125 mm diameter tubewell by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-1) with upto date amendments. The job is to be done in all lands of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. The job also includes the cost of pipe materials (M5 125mm) and lowering of caring assembly and its subsequent welding after every 10 feet upto drilled/desired depth. The casing is to be slotted as per the site requirement and as directed by site engineer. The specifications of the tubewell shall be as under: Dia. of MS pipe to be used...125 mm Casing pipe shall be as per 15 4270: 2001 Drilling method to be used... Air Rotary Method Development of tubewell with backwash method with air. compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects complete job as directed as per the directions of site engineer including all carriages upto site of work

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

providing and fitting of 32mm dia GI column pipe/rising main (Heavy). The pipe shall be properly threaded at both ends and the length of each pipe is not less than 3 mtrs. The pipe shall be provided and fitted with GI complete job including carriages upto site of work

Providing and fitting of 5 KVA single phase automatic voltage servo stabilizer (oil type) including casing complete job as diretced at site including all carriages upto site of work

Providing and fitting of 4 mm2, 3-Core flat submersible copper cable conforming to IS: 694 (Part 1st)-1964& IS: 694 (Part 2nd)- 1964 for Submersible Pumping Unit.complete job as directed at site including all carriages upto site of work

Providing and Fitting of 5mm steel wire rope for holding/anchoring of pumping unit.complete job as directed at site including all carriages upto site of work

Providing and fitting of 63 Amp DP switch with 3pin top. The job includes providing and fixing of 3ft 3ft bakelite sheet of wall with necessary arrangements.complete job 1 as directed at site including all carriages upto site of work

P/F of 40mm dia MS holding clamps fabricated out of 10mm thick MS plate with nuts and bolts.complete job as directed at site including all carriages upto site of work

P/F of suitable bends, Reducer, nipples, assorted nuts and bolts. The job also includes P/F of 32mm dia Gl gate valves (02 No).complete job as directed at site including all carriages upto site of work

providing and fixing of furniture for bed and almirah complete job 1. Bed

almirah(steel)

Providing Fitting and Commissioning of single phase submersible type pumping unit along with allied jobs The complete details of the job are as under Providing biting and testing of single phase pumping equipment with following specifications 3HP (KSB/Crompton Greaves/ Kirloskar) Discharge =1000 GPH Head=80-130 m Speed =2900 rpm (5 cum at 70m head) Moter Rating= Sustable for above ratings The motor shall be suntable for operation on voltage and frequency conforming to IS: 585-1962 (with latest amendments). The pump motor shall be coupled together with a steel coupling. The job includes lowering of the submersible pumping equipment. The job inludes providing and fitting of motor starter suitable for motor rating conforming to IS/IEC 60947-4-1 codes complete hob as directed at site including all carriages upto site of work

Electrical Part Wring for light point/ exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cabe in existing surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthling the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

Supplying and fixing of following sizes of medium class PVC channel along with accessories in surface including complete in all respects. 1. 1 inch

Wiring for power / Heating point with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface/recessed medium class PVC Conduit along with 1 No. 4 Sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthling as required.

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Existing surface/Recessed medium class PCV conduit as required. 2x2.5 mm² +1x2.5mm² earth wire.

2x4 mm²+ 1x4mm² earth wire.

2x10 mm²+ 1x6mm² earth wire.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required

Supplying and fixing suitable size G.I box with modular plae and cover in front on surface or in recess, including providng and fixing 6 pin 15/16 amp modular socket outlet and 15/16 amps modular swith, connection, painting etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution broad, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthling etc. as required. But without MCB/RCCB/Isolator. 4 way (4+12) Double door

Supplying and fixing following rating, four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required 1. 63 Amps

Changeover 63Amp ,415Volts , 4P

Supplying and fixing 5 amp, to 32 amps, rating 240 volts B/ C / D Series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and Commissioning etc as required Single Pole.

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessoriesincluding safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req (1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)

Supplying, installation, Testing & Commissioning of 12-15 Watt LED Recessed / surface Down lighter (Round /square/Rectangular) SMD type of following body material with PMMAand prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K / 6000°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminum Body including trim.

SITC of Solar grid (hybrid type) 5KVA including all assesories (complete job)

SITC of 5KVA Single Phase atomatic Voltage Servo Stabilizer (Oil type) including casing as per the site requirement (Input 110-240 V,Output 220V).

SITC of 63Amp DP Switch with 3Pin top and 3x3 ft bakelite sheet (Complete job)

SITC of 6 Sq mm or as desired 3 core copper submersible cable XLPE/Flat for providing supply to the motors. Havells/polycab/Approved make.

16 mm² Cable (2C) ,1.1k V Grade, Armoured, XLPE Insulated Stranded Conductor FRLS type for main service line Havells/polycab/equivalent make including termination with brass compression gland / aluminium lugs.