CONSTURCTION WORK OF COMMUNITY HALL CUM WORK SHED WITH URINAL & WATER POINT AT KABIR AASHRAM TOLA WARD NO.-02 , BHARA, SUJA PANCHAYAT BEGUSARAI BLOCK BEGUSARAI

300 mm dia piles

All kinds of soil.

All kinds of soil

1:2:4(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

1:3:6(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

1:4:8(1 Cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size)

Foundations, footings, bases for columns

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Under 20cm wide

Weather shade, Chajjas, corbels, etc. including edges.

Suspended floors, roots, laning, beams and balconies (Plan area to be measured)

Mild steel 6.00mm dia

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Cement mortar 1:4 (1 cement: 4 coarse send)

35 mm thick plain PVC door shutters

35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

25 mm thick (for cub-board) including nickel plated bright finished M.S.piano hinges with necessary screws

In gratings, frames, guard bar, ladders,

Fixed to steel windows by welding

Twin rubber stopper

Windows

Steel windows

Steel ventilators

Profile B

In gratings, frames, guard bar, ladders,

G.I pipes 40mm nominal bore(class B)

40 mm thick with 20 mm nominal size stone aggregate

18 mm thick

40 mm wide and 4 mm thick

1:6(1 cement: 6 coarse sand)

1:6(1 cement: 6 course sand)

1:4(1 cement: 4 course sand)

1:4( 1 cement: 4 coarse sand)

New work (three or more coats)

New work (three or more coats)

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

With average thickness of 120mm and minimum thickness at khurras point to be 65.

Provding and fixing soil,waste and vent pipes

Sand cast iron S & S pipe as per IS:1729

Provding and fixing heel rest sanitary bend

Sand cast iron S & S pipe as per IS:1729

Provding and fixing single equal plain junction of required degree with access door ,insertion rubber washer 3mm thick ,bolt and nuts complete

Sand cast iron S & S pipe as per IS:1729

Provding and fixing terminal guard

Sand cast iron S & S pipe as per IS:1729

110mm diameter

Coupler

110mm bend

Shoe (Plain)

110mm Shoe

DRAINAGE

Inside size 90x80cm and 45 cm deep including C.I. cover with frame ( light duty) 455x610 mm internal diamension tatal weight of cover and fram to be not less than 38 kg (weight of cover23 kg and weight of frame 15 kg )

Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :

1.22m x 1.22m x 0.10= 0.15 cum

1.22m x 1.22m = 1.49sqm

4 x 0.97m x 0.125m x 0.15= 0.072 cum

1.22m x 1.22m x 0.075= 0.11 cum

1.22m x 1.22m = 1.49sqm

Carriage of Materials:-

Difference Cost of materials :-

Add S.F. cost of materials

75mmX75mmX60mm

6 Amp. To 32 Amp. SP MCB 240 Volt

32 Amp SPN MCB 240 Volt

Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required.

18 watt CFL lamp

DESCRIPTION

300 mm dia piles

All kinds of soil.

All kinds of soil

1:2:4(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

1:3:6(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

1:4:8(1 Cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size)

Foundations, footings, bases for columns

All work up to plinth level

All work from plinth level upto floor V level

Walls columns, pillars, posts cind struts

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Shelves (Cast in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Edges of slabs and breaks in floors and walls.

Under 20cm wide

Weather shade, Chajjas, corbels, etc. including edges.

Suspended floors, roots, laning, beams and balconies (Plan area to be measured)

Mild steel 6.00mm dia

Thermo-Mechanically Treated bars TMTC-500-8mm dia

Thermo-Mechanically Treated bars TMTC-500-10mm dia

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Thermo-Mechanically Treated bars TMTC-500-16mm dia

Cement mortar 1:6(1 cement:6 coarse sand)

Cement mortar 1:4 (1 cement: 4 coarse send)

35 mm thick plain PVC door shutters

35mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

25 mm thick (for cub-board) including nickel plated bright finished M.S.piano hinges with necessary screws

In gratings, frames, guard bar, ladders,

Fixed to steel windows by welding

Twin rubber stopper

Windows

Steel windows

Steel ventilators

Profile B

In gratings, frames, guard bar, ladders,

G.I pipes 40mm nominal bore(class B)

40 mm thick with 20 mm nominal size stone aggregate

18 mm thick

40 mm wide and 4 mm thick

1:6(1 cement: 6 coarse sand)

1:6(1 cement: 6 course sand)

1:4(1 cement: 4 course sand)

1:4( 1 cement: 4 coarse sand)

New work (three or more coats)

New work (three or more coats)

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

With average thickness of 120mm and minimum thickness at khurras point to be 65.