Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC 10 1 GROUND FLOOR WEST GHOSH PARA JAGATDAL JAGATDAL JAGATDAL NORTH 24 PARGANAS WEST BENGAL 743125 | 24 PARAGANAS NORTH | WEST BENGAL | 743125 | L1 | Accepted-AOC THE LOWEST BIDDER(L1) | |
| 2 | L2₹28.4 L+₹46,860 (1.68%)Rejected-AOC | L2 | Rejected-AOC L2 BIDDER | |
| 3 | L3₹28.7 L+₹73,126 (2.62%)Rejected-AOC | L3 | Rejected-AOC L3 BIDDER | |
| 4 | L4₹29.9 L+₹2.0 L (7.25%)Rejected-AOC 27 WESTERN STREET ROOM NO 307 KOLKATA 700012 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700012 | L4 | Rejected-AOC L4 BIDDER | |
| 5 | L5₹33.8 L+₹5.9 L (21.1%)Rejected-AOC | L5 | Rejected-AOC L5 BIDDER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
21 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(S)BARRACKPORE
Commander Works Engineers (Sub) Military Engineer Services PO- Barrackpore Dist- 24 Pgns (N) Kolkata- 700120 (W.B)
MISC STRUCTURAL REPAIRS TO CERTAIN BLDGS AND STRUCTURES AT 2CBPO AND BAGJOLA UNDER GE (NORTH) KOLKATA.
2022_MES_565045_1
CWE/(N)KOL/21 OF 2022-2023
Open Tender
Civil Works
Item Rate
270 days
GE(NORTH)KOLKATA
AS PER NIT DETAILS
6 documents required · 6 mandatory
₹500
GE(N)KOLKATA
₹60,000
Yes
2 Feb 2023
24 Nov 2022
23 Dec 2022
24 Nov 2022
21 Dec 2022
8 Dec 2022
Amount
Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.
Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 01 here in before by wire brush including scrapping & cleaning with emery paper or by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and washing down with water as required complete all as specified and as directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed
Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.
Material and labour for mild steel TMT deformed bar or twisted bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed.
M & L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed by Engr-in-charge. (Make :- SIKA/FOSROC or any other equivalent as approved by GE)
M & L for providing and applying of Epoxy Zinc rich primer on the steel surface by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 including cleaning and removing loose concrete from steel surface complete all as specified and directed by Engr-in-charge. (Make :- SIKA/FOSROC or any other equivalent as approved by GE)
M & L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-30 to the effected beam, column etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as spd and dir by Engr-in-charge. (Make :- SIKA/FOSROC or any other equivalent as approved by GE)
Supply, mixing and application two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible . The mortar can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as spd and directed by the Engr-in-charge upto 25 mm average thickness . (Make :- SIKA/FOSROC or any other equivalent as approved by GE)
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.
Use and waste of formwork to sides of sides and soffits of beams, lintels, floors etc. for rough finished concrete surfaces complete all as specified and as directed.
Use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works n.exc. 200mm thick etc for rough finished concrete surfaces complete all as specified and as directed
Use and waste of formwork to fins, facia, louvers. parapet, chajja etc for rough finished concrete surfaces complete all as specified and as directed
Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed
Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing liquid admixture for cement mortar.
Material and labour for rendering 05mm thick in cement mortar (1:3) on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
All as per item No. 21 above but in ceiling.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified & directed.
M&L for applying wall care putty 1.5mm thick and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.
All as per item No. 24 above but in ceiling.
Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified & directed.
Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coats of oil bound distemper over a coat alkali resistant primer and finished the existing surface with 1.5mm thick wall putty etc complete all as specified and as directed.
All as per item No. 27 above but in ceiling.
Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.
All as per item No. 29 above but in ceiling.
Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and as directed.
All as per item No. 31 above but 20mm dia.
Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.
All as per item No. 33 above but 20mm dia.
All as per item No. 33 above but fixing only. Note: Serviceable GI pipe obtained from item No. 31 above shall be reused after cleaning.
All as per item No. 34 above but fixing only. (Note : Serviceable GI pipe obtained from item No. 32 above shall be reused after cleaning).
Dismantling cast iron pipes of any dia, jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed.(Note : Excavation if required, shall be measured and paid separately)
Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.
Supply and fix 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.
Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including excavation if rquired complete all as specified and as directed.
Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured)/Tee complete all as specified and as directed
Supply and fix 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
Supply and fix 100mm bore cast iron cowls complete all as specified and as directed.
Supply and fix in repair 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.
Supply and fix 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed
Supply and fix in repairs UPVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and as directed.
Supply and fix UPVC bend 110mm dia all as specified and as directed.
Supply and fix in repairs prelaminated particle board 18/19 mm thick, interior grade one side decorative choice lamination and other side balancing white lamination fixed in cup boards shutters with 6mm thick teak wood lipping/edging all round complete all as specified and as directed.
Supply and fix in repairs prelaminated particle board 18/19 mm thick, interior grade one side decorative choice lamination & other side balancing white lamination fixed in cup boards shelves with front side 6mm thick teak wood lipping/edging complete all as specified and as directed.
S&F 30mm width stainless steel Continous (piano) hinges, bright finish and all as specified and directed.
Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.
Supply and fix 100mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified and as directed.
Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples/ wooden beading complete all as specified and as directed.
Supply and fix in repairs 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fixed to steel/wooden frame complete all as specified and as directed
Supply and fix in repairs 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to steel/wooden frame complete all as specified and as directed..
Dismantling wrought iron or mild steel work for any description not otherwise provided for complete all as specified and directed.
Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed.
Dismantling of steel sheeting ( Corrugated , semicorrugated etc.) sheets as in Roof covering , wall , ridge , hips valleys and flashings etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .
Supply and fix Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified nad directed.
Supply and fix Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified nad directed.
Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc.
Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as per manufacturers instruction
Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed. (Make : Everest/Rhino/Charminar).
Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.
Taking down old unerviceble steel window/ventilator of any description including gaurd bar ,peg stay and handle complete all as specified and as directed.
Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3/4 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
Supply and fix sliding powder coated anodised aluminium window shutters for gauged/ gauged, aluminium section weighing 0.55kg/m including necessary joining cleats, roller rubber neoprene packing/gusket,etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)
Supply and fix 4mm thick sheet glass of ordinary quality in square exc 0.5 sq. m in each pane and complete all as specified and as directed
Supply and fix 4mm thick sheet glass in repairs of ordinary quality in square n. exc 0.5 sq. m in each pane and complete all as specified and as directed
Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.
Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including remouving the same after Dismatle Complete all as specified and directed.
Material and labour for Brickwork with fly ash bricks, old size straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.
Material and labour for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM(1:4) complete all as specified and as directed
Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Supply and fix in repair Rotational moulded polyethylene water storage tanks (multi layer) 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
M&L Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed
Supply and fix in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.
S.P. SINGHA
MOTHER LUMIER INDUSTRIES
ELECTRO COMMERCIAL CO
RUNJEN CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .