1. Construction of staff quarters at Meerut City.and 2. Construction of Staff quarters at Ghaziabad.and 3. Construction of Staff quarters at Shamli. and 4. Replacement of jack arch roof, other old roofs by RCC slab and heavy repair, strengthening of building structure of quarters at Shamli (SMQL), Baghpat Road (BPM) and Baraut (BTU). and 5. Improvement to various staff amenities at various staff quarters at SMQL, BTU, BPM and KEX under ADEN SMQL in jurisdiction of Sr. DEN-II/DLI.

rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 8419807.50 (-) 11.54 7448161.71

rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 72684394.05 (-) 11.54 64296614.98

Delhi Schedule of rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 15188594.75 (-) 11.54 13435830.92

rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 8439191.90 (-) 11.54 7465309.15

rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 9822867.25 (-) 11.54 8689308.37

rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 8389215.45 (-) 11.54 7421099.99

rates ( Volume-I & II ) 2021 edition (Corrected upto date). DELHI DIVISION-ENGG/NORTHERN RLY Please see Item Breakup for details. 14131243.90 (-) 11.54 12500498.35

( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 5979832.15 (-) 11.54 5289759.52

Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 13517000.00 (-) 11.54 11957138.20

( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 1718850.50 (-) 11.54 1520495.15

Schedule of rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 3972533.25 (-) 11.54 3514102.91

Delhi Schedule of rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 6215094.00 (-) 11.54 5497872.15

rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 3484172.20 (-) 11.54 3082098.73

Schedule of rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 3415927.75 (-) 11.54 3021729.69

rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 2713347.50 (-) 11.54 2400227.20

( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 94114.05 (-) 11.54 83253.29

of rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 3220054.10 (-) 11.54 2848459.86

rates ( Volume-I & II ) 2021 edition (Corrected upto date). Please see Item Breakup for details. 854452.80 (-) 11.54 755848.95

Delhi Schedule of rates ( Volume-I & II ) 2021 edition (Corrected upto date). S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () B-USSOR Items 782850.18 Below/P ar Please see Item Breakup for details. 775099.19 1.00 782850.18 Description:- All items under chapter No.21ie the chapter of Miscellaneous Items of NR/DLI USSOR-

Specifications (Formation Works, Bridge Works and P. Way Works) 2021 edition (Corrected upto date).of USSOR-2021 (Corrected up to date) S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () C-NS Item -233737.40 Below/P ar Please see Item Breakup for details. -233737.40 AT Par -233737.40 1 Description:- NS Items

nuts complete. Providing and fixing chromium plated brass 9.92 handles with necessary screws etc. complete: 18 9.92.1 125 mm Each 508 226.5 115062 ANODISED ALUMINIUM FITTINGS (ALL 9.95S FITTINGS SHALL BE ISI MARKED) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating 9.96 not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 19 9.96.2 250x16 mm Each 20 234.9 4698 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less 9.97 than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 20 9.97.2 250x10 mm Each 20 104.4 2088 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less 9.100 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 21 9.100.1 125 mm Each 20 60.05 1201 9.103 Providing and fixing bright finished brass 100 Each 113 739.8 83597.4 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic 22 coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. 9.105S GYPSUM BOARD PARTITIONS 9.112 Providing and fixing 2nd class teak wood Metre 226 85.6 19345.6 lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of 23 approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. 9.113 Providing and fixing bright finished 100 mm Each 113 721.75 81557.75 mortice lock with 6 levers without pair of 24 handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. DELHI DIVISION-ENGG/NORTHERN RLY Providing and fixing magnetic catcher of approved quality in cupboard / ward robe 9.114 shutters, including fixing with necessary screws etc. complete. 25 9.114.2 Double strip (horizontal type) Each 305 34.15 10415.75 9.115 Providing and fixing powder coated telescopic Set 113 355.05 40120.65 drawer channels 300 mm long with necessary 26 screws etc. complete as per directions of Engineer- in-charge. 9.116 Providing and fixing sliding arrangement in Each 113 17.65 1994.45 racks/ cupboards/cabinets shutter by with 27 stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm 9.120 shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in- charge, manufacturer's specification & drawing. 28 9.120.1 30 mm thick plain PVC door shutters Sqm 325 2455.1 797907.5 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density 9.127 protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 29 9.127.2 1.0 mm thick Sqm 240 764 183360 9.132 Providing and fixing aluminum U beading of Kg 85 530.3 45075.5 required size to Pre-laminated/flush door 30 shutter, including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of 9.134 aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 9.134.1 35 mm thick shutters DELHI DIVISION-ENGG/NORTHERN RLY With ISI marked M.S. pressed butt hinges 9.134.1.1 bright finished of required size 31 9.134.1.1.1 Second class teak wood Sqm 706 4484.65 3166162.9 9.141 Providing and fixing PVC Door Frame of size Metre 1016 462.25 469646 50x47 mm with a wall thickness of 5 mm (+/- 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 32 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. Total 9822867.25 All items appearing in chapter 10 i.e. ''Steel Work'' as per CPWD Delhi Schedule of rates ( Volume-I Item- 7 & II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 10.0 STEEL WORK 10.1 Structural steel work in single section, fixed Kg 335 93.05 31171.75 with or without connecting plate, including 1 cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2 Structural steel work riveted, bolted or Kg 3575 111.95 400221.25 welded in built up sections, trusses and 2 framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, 10.15 welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.15.1 Fixing with 15x3 mm lugs 10 cm long Kg 11297 146.55 1655575.35 embedded in cement concrete block 3 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position 10.16 and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 4 10.16.1 Hot finished welded type tubes Kg 24006 154.9 3718529.4 10.17 Providing and fixing M.S. fan clamp type I or Each 356 185.95 66198.2 II of 16 mm dia M.S. bar, bent to shape with 5 hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. DELHI DIVISION-ENGG/NORTHERN RLY 10.18 Providing and fixing circular/ Hexagonal cast Each 140 185.2 25928 iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid 6 shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Steel work welded in built up sections/ framed work, including cutting, hoisting, 10.25 fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, Kg 4422 142.3 629250.6 7 railings, brackets, gates and similar works 10.28 Providing and fixing stainless steel ( Grade Kg 1412 612.25 864497 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary 8 accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Providing & fixing fly proof wire gauge to windows, clerestory windows & doors with 10.29 M.S. Flat 15x3 mm and nuts & bolts complete. 10.29.2 Stainless steel (grade 304) wire gauge of 0.5 Sqm 698 971.55 678141.9 9 mm dia wire and 1.4 mm aperture on both sides Providing & fixing glass panes with putty and 10.30 glazing clips in steel doors, windows, clerestory windows, all complete with : 10.30.1 4.0 mm thick glass panes (weight not less Sqm 340 940.3 319702 10 than 10 kg/sqm) Total 8389215.45 All items appearing in chapter 11 i.e. ''Flooring'' as per CPWD Delhi Schedule of rates ( Volume-I & II Item- 8 ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 11.0 FLOORING Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone Sqm 1322 545 720490 1 aggregate 11.26S KOTA STONE FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment 11.26 to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 2 11.26.1 25 mm thick Sqm 71 1706.6 121168.6 11.37S CERAMIC GLAZED TILES DELHI DIVISION-ENGG/NORTHERN RLY 11.37 Providing and laying Ceramic glazed floor Sqm 565 935.6 528614 tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red 3 Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.39 Providing and laying rectified Glazed Ceramic Sqm 1351 1142.8 1543922.8 floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, 4 Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm 11.41A including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of 11.41A.1 size 5 11.41A.1.1 Size of Tile 600 x 600 mm Sqm 3755 1286.6 4831183 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours 11.47 and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 6 11.47.2 Size of Tile 600x600 mm Sqm 3530 1676.15 5916809.5 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement 11.56 mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. 11.56.1 Polished Granite stone slab colour of Black, Sqm 120 3908.8 469056 7 Cherry/Ruby Red or equivalent Total 14131243.90 DELHI DIVISION-ENGG/NORTHERN RLY All items appearing in chapter 12 i.e. ''Roofing'' as per CPWD Delhi Schedule of rates ( Volume-I & II Item- 9 ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 12.0 ROOFING 12.1S SHEET ROOFING 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 12.16 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: 12.16.1 With common burnt clay F.P.S.(non modular) Sqm 3980 905.8 3605084 1 brick tile of class designation 10 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), 12.21 including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 2 12.21.1 In 75x75 mm deep chase Metre 3474 260.2 903934.8 12.22 Making khurras 45x45 cm with average Each 241 266.6 64250.6 minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over 3 P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick 12.40 cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal 12.41 ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 4 12.41.1 75 mm diameter Metre 1430 213 304590 5 12.41.2 110 mm diameter Metre 1950 319.75 623512.5 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 6 12.42.1.2 110 mm Each 305 119.95 36584.75 12.42.2 Single pushfit Coupler 7 12.42.2.2 110 mm Each 305 110.6 33733 12.42.3 Single tee with door 8 12.42.3.2 110x110x110 mm Each 305 205.45 62662.25 12.42.4 Single tee without door 9 12.42.4.2 110x110x110 mm Each 305 190.75 58178.75 12.42.5 Bend 87.5 degrees 10 12.42.5.1 75 mm bend Each 50 91.8 4590 11 12.42.5.2 110 mm bend Each 410 132 54120 DELHI DIVISION-ENGG/NORTHERN RLY Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. 12.43 screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12 12.43.2 110 mm Each 565 309.5 174867.5 12.50 Providing and fixing precoated galvanised Sqm 80 671.55 53724 iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 13 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Total 5979832.15 All items appearing in chapter 13 i.e. ''Finishing'' as per CPWD Delhi Schedule of rates ( Volume-I & Item- 10 II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 1 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 7198 282 2029836 15 mm cement plaster on the rough side of 13.2 single or half brick wall of mix : 2 13.2.2 1:6 (1 cement: 6 fine sand) Sqm 3920 324.3 1271256 13.16S 6MM CEMENT PLASTER 13.17 6 mm cement plaster 1:3 (1 cement : 3 fine Sqm 1412 334.2 471890.4 sand) finished with a floating coat of neat 3 cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 13.25 Extra for plastering: 13.26 Providing and applying plaster of paris putty Sqm 19721 214.3 4226210.3 of 2 mm thickness over plastered surface to 4 prepare the surface even and smooth complete. Distempering with oil bound washable 13.41 distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and Sqm 10558 162.55 1716202.9 5 including water thinnable priming coat with cement primer Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved 13.42 manufacturer, of required shade and colour complete, as per manufacturer's specification. 6 13.42.1 Two or more coats on new work Sqm 4200 92.75 389550 13.44S EXTERIOR FINISHING DELHI DIVISION-ENGG/NORTHERN RLY Finishing walls with textured exterior paint of 13.45 required shade : 13.45.1 New work (Two or more coats applied @ 3.28 Sqm 8473 245 2075885 7 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Finishing with Deluxe Multi surface paint 13.48 system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 230 158.95 36558.5 8 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.2 Painting wood work with Deluxe Multi Surface Sqm 3671 144.9 531927.9 Paint of required shade. Two or more coat 9 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 10 13.61.1 Two or more coats on new work Sqm 1590 131.45 209005.5 Applying priming coats with primer of 13.85 approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. White washing with lime to give an even 13.87 shade : 11 13.87.1 Old work (two or more coats) Sqm 11700 19 222300 Painting with synthetic enamel paint of 13.99 approved brand and manufacture of required colour to give an even shade : 12 13.99.1 One or more coats on old work Sqm 1100 86.55 95205 Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved 13.108 manufacturer and of required shade and colour complete. as per manufacturer's specification. 13 13.108.1 One or more coats on old work Sqm 2300 50.6 116380 Finishing walls with textured exterior paint of 13.110 required shade : 13.110.2 Old work (One or more coats) applied @ 1.82 Sqm 1050 118.85 124792.5 14 ltr/10 sqm. Total 13517000.00 All items appearing in chapter 14 i.e. ''Repairs to Building'' as per CPWD Delhi Schedule of rates ( Item- 11 Volume-I & II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 14.0 REPAIRS TO BUILDING Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and 14.1 plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1.1 With cement mortar 1:4 (1 cement : 4 fine Sqm 2300 462.3 1063290 1 sand) Renewing glass panes, with putty and nails 14.5 wherever necessary including racking out the old putty: 14.5.1 Float glass panes of nominal thickness 4 mm Sqm 60 941.95 56517 2 (weight not less than 10kg/sqm) 14.75AS ROUTINE MAINTENANCE WORK DELHI DIVISION-ENGG/NORTHERN RLY 14.75A Cleaning of terrace/loft water storage tank Litre 470000 .4 188000 (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and 3 disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 14.76 Cleaning and desilting of gully trap chamber, Each 370 89.45 33096.5 including removal of rubbish mixed with 4 earth etc. and disposal of same, all as per the direction of Engineer-in-charge. 14.77 Cleaning of chocked sewer line by diesel Metre 1100 285.9 314490 running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled 5 operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm 14.78 Cleaning of under ground sump, Over Head Sqm 890 71.3 63457 R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump 6 shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. Total 1718850.50 All items appearing in chapter 15 i.e. ''Dismantling and Demolishing'' as per CPWD Delhi Schedule Item- 12 of rates ( Volume-I & II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 15.0 DISMANTLING AND DEMOLISHING 15.3 Demolishing R.C.C. work manually/ by cum 50 2928.1 146405 mechanical means including stacking of steel 1 bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 15.4 Demolishing R.B. work manually/ by cum 80 2619.45 209556 mechanical means including stacking of steel 2 bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. DELHI DIVISION-ENGG/NORTHERN RLY Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 3 15.7.4 In cement mortar cum 110 1698.45 186829.5 Dismantling tile work in floors and roofs laid 15.23 in cement mortar including stacking material within 50 metres lead. 4 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 1650 60.5 99825 15.27 Demolishing mud phaska in terracing and cum 3750 753.75 2826562.5 5 disposal of material within 50 metres lead. 15.30 Dismantling jack arch roofing and floors Sqm 1500 209.4 314100 including stacking of serviceable material and 6 disposal of unserviceable material within 50 metres lead. 15.56 Dismantling old plaster or skirting raking out Sqm 1450 45.05 65322.5 joints and cleaning the surface for plaster 7 including disposal of rubbish to the dumping ground within 50 metres lead. 15.60 Disposal of building rubbish / malba / similar cum 565 219.35 123932.75 unserviceable, dismantled or waste materials by mechanical means, including loading, 8 transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Total 3972533.25 All items appearing in chapter 16 i.e. ''Road Work'' as per CPWD Delhi Schedule of rates ( Volume-I Item- 13 & II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 16.0 ROAD WORK 16.1S ROADS 16.1 Preparation and consolidation of sub grade Sqm 980 180.5 176890 with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and 1 consolidating with road roller including making good the undulations etc. and re- rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. 16.3 Supplying and stacking at site. 2 16.3.2 63 mm to 45 mm size stone aggregate cum 30 1624.5 48735 16.4 Laying, spreading and compacting stone cum 45 865.8 38961 aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper 3 grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . 16.30S PREMIX CARPET Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the 16.30 bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : 4 16.30.1 On W.B.M. @ 0.75 Kg / sqm Sqm 2630 45.2 118876 5 16.30.2 On bituminous surface @ 0.50 Kg / sqm Sqm 2631 36.6 96294.6 DELHI DIVISION-ENGG/NORTHERN RLY Providing and applying tack coat using bitumen emulsion conforming to IS:8887, 16.31 using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. 4 cm thick bitumastic sheet with hot bitumen of approved quality, using stone chippings (60% with 12.5 mm nominal size and 40% with 10 mm nominal size) @ 2.60 cum per 100 sqm and coarse sand @ 2.60 cum per 16.39 100 sqm of road surface and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum of sand over a tack coat with hot straight run bitumen, including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) : 16.39.1 With paving Asphalt grade VG - 10 heated Sqm 2630 427.75 1124982.5 6 and then mixed with solvent at the rate of 70 grams per kg of asphalt 16.40S SEAL COAT 16.40 Providing and laying seal coat of premixed Sqm 2630 79.85 210005.5 fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 7 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. 16.47S PAINTING AREA/RUNWAY MARKING Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior 16.47 make as approved by the Engineer-in-charge, i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete. 8 16.47.1 New work (Two or more coats) Sqm 375 158.5 59437.5 9 16.47.2 Old work (One or more coats) Sqm 476 101.6 48361.6 16.49S MISCELLANEOUS 16.75 Providing and laying C.C. pavement of mix M- cum 226 8277.55 1870726.3 25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush 10 etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and 16.91 proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. DELHI DIVISION-ENGG/NORTHERN RLY 16.91.2 80 mm thick C.C. paver block of M-30 grade Sqm 2395 1011.2 2421824 11 with approved color design and pattern. Total 6215094.00 All items appearing in chapter 17 i.e. ''Sanitary Installations'' as per CPWD Delhi Schedule of rates ( Item- 14 Volume-I & II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush 17.2 pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 14 5540.55 77567.7 1 seat and lid Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm 17.3 flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic Each 57 6941.3 395654.1 2 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 17.7 including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.3 White Vitreous China Wash basin size Each 159 2040.85 324495.15 3 550x400 mm with a pair of 15 mm C.P. brass pillar taps Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 4 17.10.1.2 510x1040 mm bowl depth 225 mm Each 57 6677.4 380611.8 17.10.2 Kitchen sink without drain board 5 17.10.2.2 610x460 mm bowl depth 200 mm Each 80 3337.85 267028 6 17.10.2.3 470x420 mm bowl depth 178 mm Each 80 2936.45 234916 Providing and fixing white vitreous china 17.13 water closet squatting pan (Indian type) : 7 17.13.2 Orissa pattern W.C. pan of size 580x440 mm Each 257 2758.2 708857.4 Providing and fixing P.V.C. low level flushing cistern with manually controlled device 17.18 (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 8 17.18.1 10 litre capacity - White Each 57 1023.05 58313.85 Providing and fixing P.V.C. waste pipe for sink 17.28 or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 9 17.28.1.1 32 mm dia Each 99 90.95 9004.05 10 17.28.1.2 40 mm dia Each 57 101.65 5794.05 DELHI DIVISION-ENGG/NORTHERN RLY 17.31 Providing and fixing 600x450 mm beveled Each 128 1411.15 180627.2 edge mirror of superior glass (of approved 11 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17.33 Providing and fixing 600x120x5 mm glass Each 99 942.15 93272.85 shelf with edges round off, supported on anodised aluminium angle frame with C.P. 12 brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 17.34 Providing and fixing toilet paper holder : 13 17.34.1 C.P. brass Each 57 680.8 38805.6 Providing and fixing soil, waste and vent 17.35 pipes : 17.35.1 100 mm dia 14 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 Metre 311 1018.05 316613.55 17.35.1.2 Centrifugally cast (spun) iron socket & spigot Metre 169 1077.4 182080.6 15 (S&S) pipe as per IS: 3989 17.35.2 75 mm diameter : 16 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 Metre 226 931.55 210530.3 Total 3484172.20 All items appearing in chapter 18 i.e. ''Water Supply'' as per CPWD Delhi Schedule of rates ( Item- 15 Volume-I & II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including 18.4 all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. -Internal Exposed on walls 1 18.4.1 PN - 16 Pipe, 20mm OD (SDR-7.4) Metre 40 254.95 10198 2 18.4.3 PN - 16 Pipe, 32mm OD (SDR-7.4) Metre 50 358.9 17945 18.6A Providing and fixing PPR Unions 3 18.6A.1 PPR Union 20mm Each 4 295.75 1183 4 18.6A.3 PPR Union 32mm Each 4 416.15 1664.6 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 5 18.7.5 40 mm nominal dia Pipes Metre 141 674.35 95083.35 DELHI DIVISION-ENGG/NORTHERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 6 18.8.1 15 mm nominal dia Pipes Metre 1008 441.15 444679.2 7 18.8.3 25 mm nominal dia Pipes Metre 706 626.05 441991.3 8 18.8.4 32 mm nominal dia Pipes Metre 10 712.75 7127.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 9 18.9.6 50 mm nominal dia Pipes Metre 382 811.85 310126.7 18.15S BRASS FITTINGS Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 10 18.18.1 15 mm nominal bore Each 99 348.85 34536.15 11 18.18.3 25 mm nominal bore Each 152 399.15 60670.8 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet : 12 18.22.2 150 mm diameter Each 51 190.1 9695.1 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone 18.37 aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.37.1 With common burnt clay F.P.S.(non modular) Each 102 9020.8 920121.6 13 bricks of class designation 7.5 18.48 Providing and placing on terrace (at all floor Litre 25418 9.7 246554.6 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 14 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 15 18.49.1 15 mm nominal bore Each 203 434.2 88142.6 DELHI DIVISION-ENGG/NORTHERN RLY Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS 18.50 standards and weighing not less than 810 gms. 16 18.50.1 15 mm nominal bore Each 254 715.05 181622.7 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 17 18.52.1 15 mm nominal bore Each 102 594.75 60664.5 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 18 18.53.1 15mm nominal bore Each 407 500.35 203642.45 18.53A Providing and fixing C.P. Brass extension Each 559 61.7 34490.3 nipple (size 15mmx50mm) of approved make 19 and quality as per direction of Engineer-in- charge. Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 20 18.58.1.1 100 mm nominal dia Each 1016 33.2 33731.2 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and 18.60 tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 21 18.60.1 80 mm dia nominal bore Each 51 3266.1 166571.1 18.65 Providing and fixing PTMT soap Dish Holder Each 152 96.75 14706 having length of 138mm, breadth 102mm, 22 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Providing and fixing unplasticised P.V.C. 18.74 connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 23 18.74.1 15 mm nominal bore with 30cm length Each 360 85.5 30780 Total 3415927.75 All items appearing in chapter 19 i.e. ''Drainage'' as per CPWD Delhi Schedule of rates ( Volume-I & Item- 16 II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. 19.4 cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 19.4.3 180x150 mm size P type 19.4.3.1 With common burnt clay F.P.S. (non modular) Each 6 2534 15204 1 bricks of class designation 7.5 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 2 19.6.2 150 mm dia. R.C.C. pipe Metre 100 493.1 49310 3 19.6.3 250 mm dia. R.C.C. pipe Metre 2739 811.15 2221739.85 DELHI DIVISION-ENGG/NORTHERN RLY Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size), inside 19.7 plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total 19.7.1 weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non modular) Each 20 11687.1 233742 4 bricks of class designation 7.5 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation 19.9 concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement 19.9.1 concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 19.9.1.1 With common burnt clay F.P.S. (non modular) Each 6 11886.45 71318.7 5 bricks of class designation 7.5 Providing and fixing in position pre-cast 19.19 R.C.C. manhole cover and frame of required shape and approved quality Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal 19.21 size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 6 19.21.1 For pipes 100 to 250 mm diameter Each 3 683.7 2051.1 7 19.21.2 For pipes 250 to 300 mm diameter Each 3 785.9 2357.7 DELHI DIVISION-ENGG/NORTHERN RLY Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) 19.27 including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With common burnt clay F.P.S. (non modular) Each 6 5589.45 33536.7 8 bricks of class designation 7.5 Extra for depth beyond 45 cm of brick 19.31 masonry chamber : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb 19.32 shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) Each 3 28029.15 84087.45 9 bricks of class designation 7.5 Total 2713347.50 All items appearing in chapter 21 i.e. ''Aluminium Work'' as per CPWD Delhi Schedule of rates ( Item- 17 Volume-I & II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 71 1325.55 94114.05 1 (weight not less than 12.50 kg/sqm) Total 94114.05 All items appearing in chapter 22 i.e. ''Water Proofing'' as per CPWD Delhi Schedule of rates ( Item- 18 Volume-I & II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 22.0 WATER PROOFING Grading roof for water proofing treatment 22.14 with 22.14.2 Cement mortar 1:3 (1 cement : 3 coarse cum 113 14275.75 1613159.75 1 sand) DELHI DIVISION-ENGG/NORTHERN RLY 22.22A P r o v i d i n g and applying fibre reinforced Sqm 3389 474.15 1606894.35 elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in 2 the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. Total 3220054.10 All items appearing in chapter 26 i.e. ''New Technologies and Materials'' as per CPWD Delhi Item- 19 Schedule of rates ( Volume-I & II ) 2021 edition (Corrected upto date). S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS 26.28S REPAIR AND REHABILITATION ITEMS 26.40 Providing and fixing hard drawn steel wire Sqm 1041 820.8 854452.8 fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means 1 of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. Total 854452.80 Schedule Schedule B-USSOR Items All items under chapter No.21ie the chapter of Miscellaneous Items of NR/DLI USSOR-2021 edition (Corrected upto date) complete for all L&M as per Indian Railways Unified standard Specifications Item- 1 (Formation Works, Bridge Works and P. Way Works) 2021 edition (Corrected upto date).of USSOR- 2021 (Corrected up to date) S No. Item No Description of Item Unit Qty Rate Amount Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity

Hydra or similar tyre mounted Pick-n-Carry Hour crane of 12T capacity for misc. works of handling of material

Tractor with Trolley for local transportation or Hour other misc. works. Total 775099.19 Schedule Schedule C-NS Item Item- 1 NS Items S No. Item No Description of Item Unit Qty Rate Amount DELHI DIVISION-ENGG/NORTHERN RLY

Item rate for providing & fixing 150mm dia Metre (PVC) Rain water pipe minimum thickness 4mm class-II capability as per IS specification(for rain water pipe with one couplerfree of cost for every standard length of pipe(6mt) of or one end socketed with all fittings like elbow, 30, 45, 60 & 90 degree & tail piece of different design as per requirement including the cost of supplying & fixing clamps of approved design M.S flat 25mm x 5mm clamps of make in approved design to be fixed with wall after making the necessary arrangements like holes & fixing the same and making good conditions.The interval of clamps must not exceed 1mt. The pipe & fittings will be jointed with solvent cement solution of approved manner the rate will be also include the removing of all broken existing, pipes & stacking all L&M all taxes, all lead & lift complete job. so nothing extra will be paid whatsoever case may be.

Rebate for dismantling of existing abandoned Sqm structure having jack arch roofing RCC/AC sheet roofing over head tanks (steel or RCC), existing cabin and removing debries another released materials after dismantling out side Rly.land. All released materials such as doors, windows, steel grills, rails, girders will be the property of contractors. Contractors will quote the rate for payment to the railway on plinth area basis. The rate includes all L & M, loading, Unloading, handling, and rehandling etc. So as to clear railway premises of all materials and debries. Total -233737.40