EE(E/M)/KMDA/GAP-I /T-23(E)/2023-24

Amount

Dewatering by pumps including all leads, lifts and making all arrangements of disposal, where continuous flow of water from a source other than natural or ground water is encountered in case of emergency maintenance works related to leakage, breakage and making wet connections. [Note : - In case of any other situation demanding such emergency dewatering. use of this item is to be approved by the Superintending Engineer/Tender Accepting Authority. This item shall be executed on the specific direction duly supported by proper clarification of the E.I.C. who will be satisfied in absolute discretion that such work has not been necessitated due to any natural source of water or any fault of the Contractor (20 HP pump *02 Nos* 8 Hrs/Day*10 Days=3200 HP-Hr)

Cleaning of floating materials / garbage / any other foul materials from incoming sewer of drainage pumping station / adjoining penstock gate / open Nikashi / Lock Gate at Canal etc. by mathor labour after removing concrete slab / manhole cover etc. without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc. by using iron pans, buckets including all labour, tools & plants including expulsion of impure / inflammable / asphyxiating gases from the drains etc. and removing the spoils in dry condition and disposing the same by truck beyond the area of Municipal Corporation / municipality / Notified Area Authority / Industrial Township Authority etc. for such disposal including the cost of loading, unloading, transportation and making arrangement of necessary land for disposal, spreading and leveling as necessary etc. and cleaning the road side in all respects, complete as per direction of the Engineer- in-Charge. (Land for disposal to be arranged by the contractor).(Payment will be made on the basis of actual stack measurment of spoils in dry condition at roadside)(Length-15m,Breadth-10,Depth-1m)(L-15m * B-10m * D-1m=150 cubic mtr)

Supply and delivery of Cotton Waste (White Fine Quality)

Supply & Fixing of Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10/16 kg/sqcm (seat test) and body tested to 15/24 kg/sqcm 350 NB and above valves should be provided with enclosed gear box and antifriction device for ease of operation. All the valves should be tested by closed end method. Size-250mm(Rate for PN 1.6 ratings)

Supplying empty Cement bags in good condition.

Filling empty Cement bags with dry earth or sand,stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags.

SUPPLY OF DIFFERENT MATERIALS AS PER APPROVED SPECIFICATION Silver Sand Stacked at site. (Cement Bag-150 Nos* Volume-.0354 cum=5.31 cum)

Supply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI mark as per relevent IS Specification (heavy quality) having wall thickness not less than 8 mm. [N.B.: The rates for supply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates ](Diameter in mm-250)

Flange joint to C.l./D.l/M.S. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-charge.Size-250mm

STAR ENTERPRISE

M/S. S. M. AND COMPANY