Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.9 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹29.3 L+₹5.4 L (22.7%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S MADONA AND CO L2 | MAHALAXMI ASSOCIATE L1 |
|---|---|---|---|---|---|
| 1.00 | Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping ground within lead upto IITG Campus | 1,100 | Sqm | 50 ₹55,000 Lowest | 100 ₹1,10,000 |
| 2.00 | Restoration work: After surface preparation, proper applications to be done with Dr. Fixit rust remover over the effected bars, after removing the rust from the surface with sand paper wash it throughly and apply Dr. Fixit epoxy zinc primer over the clean bar to regainits thickness. Application polymer coating and polymer modified mortar over the minimum thickness area in case of major affected area apply Dr. Fixit Epoxy Bonding agent over the saturated dry surface as a old and new concrete bonding agent over the entire dismantled surface. Then apply polymer modified concrete to repair of damage reinforced concrete like beams, slabs etc. Apply Dr. Fixit microconcrete where acess is restricted and compaction is not possibe | 1,100 | Sqm | 1,550 ₹17,05,000 | 1,325 ₹14,57,500 Lowest |
| 3.00 | Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior
wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self
priming of cementatious waterproofing polymer(dilution with water in the
ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution
with water in the ratio of 3:1 ) after scrapping and properly cleaning the
surface to remove pre-existing paint film & loose particles till plaster is
visible, complete in all respect as per the direction of Engineer-in-Charge. | 358.05 | Sqm | 630 ₹2,25,571.5 | 500 ₹1,79,025 Lowest |
| 4.00 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based
polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. | 358.05 | Sqm | 450 ₹1,61,122.5 | 350 ₹1,25,317.5 Lowest |
| 5.00 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | 1,457.74 | Sqm | 150 ₹2,18,661 | 80 ₹1,16,619.2 Lowest |
| 6.00Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : | |||||
| 6.01 | New work (two or more coats) over and including waterthinnable priming coat with cement primer having VOC contentless than 50 gram/litre | 1,457.74 | Sqm | 155 ₹2,25,949.7 | 60 ₹87,464.4 Lowest |
| 7.00 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 1,080.66 | Sqm | 75 ₹81,049.5 Lowest | 80 ₹86,452.8 |
| 8.00Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. | |||||
| 8.01 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | 1,080.66 | Sqm | 50 ₹54,033 Lowest | 60 ₹64,839.6 |
Tender Value
₹31.7 L
EMD Value
₹65,000
Closing Date
27 Oct 2025, 2:00 pmClosed
HoS Maintenance
IPM Section, IIT Guwahati
Retrofitting of Slab and Repainting of Various rooms and Corridor area of Lohit Hostel at IITG Campus
2025_IITG_880580_1
IITG/IPM/NIT/R/2025-26/54
Open Tender
Civil Works
Works
180 days
IIT Guwahati
Please refer tender document
2 documents required · 2 mandatory
₹3,000
Payable To IIT Guwahati
₹65,000
8 Dec 2025
8 Oct 2025
28 Oct 2025
8 Oct 2025
27 Oct 2025
8 Oct 2025
Amount
Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping ground within lead upto IITG Campus
Restoration work: After surface preparation, proper applications to be done with Dr. Fixit rust remover over the effected bars, after removing the rust from the surface with sand paper wash it throughly and apply Dr. Fixit epoxy zinc primer over the clean bar to regainits thickness. Application polymer coating and polymer modified mortar over the minimum thickness area in case of major affected area apply Dr. Fixit Epoxy Bonding agent over the saturated dry surface as a old and new concrete bonding agent over the entire dismantled surface. Then apply polymer modified concrete to repair of damage reinforced concrete like beams, slabs etc. Apply Dr. Fixit microconcrete where acess is restricted and compaction is not possibe
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :
New work (two or more coats) over and including waterthinnable priming coat with cement primer having VOC contentless than 50 gram/litre
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
Old work (one or more coats)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
Old work (one or more coats)
M/S MADONA AND CO (BID ID -3301165)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
NIT.pdf
Tender Documents • 0.41 MB
BOQ_925564.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .