Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹37.5 L+₹35,635 (0.96%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹38.5 L+₹1.3 L (3.55%)Rejected-Finance 6146 HIRA CHOWK SIRKI BAZAR BATHINDA PB 151005 | BATHINDA | PUNJAB | 151005 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹40.8 L+₹3.6 L (9.77%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹41.0 L+₹3.8 L (10.2%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
6 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(W) HISAR
GE(W) HISAR HISAR MIL STN HISAR 125006
GE(W)/HSR-79/2022-23 REPAIR TO SUNKEN FLOORS AND SANITARY FITTING OF OFFRS MD ACCN (DAY TO DAY) OF ZONE A AT HISAR MIL STN UNDER GE (W) HISAR
2023_MES_584304_1
GE(W)/HSR-79/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE(W) HISAR
As per tender documents
8 documents required · 8 mandatory
₹500
GE(W) HISAR
₹98,000
Yes
23 May 2023
4 Mar 2023
8 Apr 2023
4 Mar 2023
6 Apr 2023
20 Mar 2023
Amount
Treatment of sunken floor slab compraises of the following specifications and all as specified :- (i) M&L for Demolition/cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out (fixing of nozzle and grouting & WPC will be measured and paid separately). (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) GI pipe 50mm dia medium grade 50cm long laid on each sunken floor as spout complete all as specified and direced by EIC. (vii) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured and paid separately) (viii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 type C-1 all round after painting with anticorrosive paint. (ix) after above process, sunken portion shall be filled with PCC 1:5:10 completely and 40 mm thick PCC 1:3:6 shall be provided at the top surface. Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. (ii) All debries obtained from site will be thrown away out side MD land by contractor at his own expense. (iii) For payment purpose the plan area of sunken floor shall be taken into accounts.
Demolition of cement concrete(unreinforced)/ lime concrete as in ground floor exceeding 15cm thickness including removing rubbish complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-1(using 20 mm graded crushed Stone agg) as in padding leveling course,subbase , plateform and complete all as specified and directed.
Demoliton of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing debries out of MD land complete all as specified and directed.
M&L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.
M&L for coloured glazed ceramic tiles of size 300 x 600 mm thick as in vertical surface in light and dark shade combination set and jointed in neat cement slurry with 3-5 mm tiling Spacer tool and pointed flush with white or coloured Epoxy to match ,over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.
S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) tiles oof size 400 x 400 mm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed with 3-5 mm tiling Spacer tool in neat cement slurry and pointed flush with white or coloured Epoxy to match and complete all as specified and directed.
M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) of size 600mm x 1200 mm in floors etc set & jointed with 3-5 mm tiling Spacer tool in neat cement slurry and flush pointed with white or coloured Epoxy to match, including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
All as per item no 09.00 above but in skirting over and including 10mm thick cement plaster 1:4 complete all as specified and directed.
Supply only water proofing compound complete all as specified and directed.
S&F in repairs 15mm dia CP Brass wall mixture chromium plated fancy type for mixing hot and cold water screwed down for iron pipe and fixed in posistion complete all as specified and directed.
S&F 15mm dia Brass CP Basin mixture chromium plated fancy type long body for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed.
S&F 15mm dia Brass CP Sink mixture chromium plated fancy type long body for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed.
S&F in repair Glass Corner Shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed.
S&F in repair CP Bass cascade Health Faucet with hose (Min length 1.5mtr of CP brass) & hook of CP brass complete all as specified and directed.
Supply and fixing in repair PTMT Cabinate looking mirror 600x450X150 mm complete all as specified and directed.
S&F in repair 15mm bore CP Two Way Bib taps Long Body cast copper alloy fancy type chromium plated and complete all as specified and directed.
S&F in repair 15 mm dia CP Angle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.
S&F in repair brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed.
S & F in repair Seat cover for EWC in white colour/black colour complete all as specified and directed.
S&F Chromium plated tubular towel rail 20mm dia, D type, 60 cm long between flanges and complete all as specified and directed.
S & F PVC connection 15 mm dia and 450 mm long with PTMT nuts complete all as specified and directed.
S&F Premium Design ,Stainless steel Heavy weight Cloth Hanger of 6 pin with length 250-400 mm and complete all as specified and directed.
S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed.
S&F in repair, PVC flushing cistern 10 ltr capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed.
S&F Vitreus china wash down water closet pan (Padestal pattern )while excluding ,flushing cistern , flushing pipe and inclusive of fixing bolt, plastic water closet seat cover and mild steel chromium plated or aluminised hinging comlpete inclusive taking down of old WC of any type and complete all as specified and directed.
Taking down the EWC for tiling work /sunken repair work etc or for any maintenance work in the bathroom and refixing the same EWC after carrying out the work and complete all as specified and directed.
S&F Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and complete fixed in repair complete all as specified and directed.
S&F in repair 15mm size Swan Neck ,long Body ,Pillar taps, fancy type cast copper alloy, Quarter turn, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair Vitreous China Urinal, Half Stall type complete including providing and fixing Plugs,Bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws , pointing around urinal back in cement , fixing automatic flushing cistern with brackes flush pipe , grating and union for discharge pipe excluding flushing cistern flush pipe and waste pipe complete all as specified and directed.
S&F Vitreous China Urinal partition white of Size 310 x 700 mm in repairs and complete all as specified and directed.
Taking up or down 15mm bore dia, steel/Composite tubing & connections incl cleaning for refining or removal to store complete all as specified and directed.
Taking up or down for 20mm bore steel/Composite water tubing galvanised with connection complete all as specified and directed.
S&F steel water tubing galvanised 15mm bore, med grade fixed to walls and ceiling or in floor incl cutting, chissling and filling the same with CM 1:4 and making good and complete all as specified and directed.
All as per item No 36.00 above but fixing only complete all as specified and directed.
S&F steel water tubing galvanised 20mm bore, medium grade with all fittings fixed to wall and ceiling or in floor incl cutting, chissling and filling the same with CM 1:4 and making good and complete all as specified and directed.
All as per item No 38.00 above but fixing only complete all as specified and directed.
S&F in repairs 15mm bore CP Bib taps Long Body Half turn/Quarter turn , cast copper alloy fancy type chromium plated and fixed complete all as specified and directed.
S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed.
Taking down cement plaster upto three Storey incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
M&L, 15mm thick rendering upto three storeys in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 as on brick or concrete walls surfaces mixed with liquid type water proofing compound 200ml per 50 Kg bag of cement as per manufacturer instructions, finished even and smooth without using extra cement complete all as specified and directed. Note:-WPC shall not be paid Separately.the rates are inclusive of WPC
All as above item No 44.00 but 10mm thick in CM 1:3 as in ceiling complete all as specified and directed.
M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete all as specified and directed.
M & L for preparation of newly plastered surface of wall and applying two coats of OBD over one coat of 1.3mm thick wall care putty on wall complete all as specified and directed
M&L, three coats of white wash to ceiling surfaces incl preparation of surfaces complete all as specified and directed.
M & L two coat of cement base paint on new surfaces of walls including preparation of surfaces complete all as specified and directed.
M & L for complete removal of existing treatment of old surface of wall and applying two coats of OBD over two coat of 1mm thick wall care putty on wall complete all as specified and directed
M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc by mechanical equipments and applying two coats of cement base paint , white or tinted over a coat of cement primer complete all as specified and directed.
Taking down chowkat or frame with shutters area n.exe 1.5 sqm each (Without taking off the shutters from the frame) incl cutting holes For hold fast & making good complete all as specified and directed.
S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded.The rates include for painting with one shop coat of zinc chromate primer. complete all as specified and directed. Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3.
S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete w/o glazing bars devetailed or welded. The rates include for painting with one shop coat of zinc chromate primer complete all as specified and directed. Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3.
S&F steel ventilator with top hung shutter of glazed & gauged including hinges, steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F,MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank,cooler stand and similar work conformed to Fe-410 or 310-0 complete all as specified and directed.
Supply and fixing acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method complete all as specified and directed.
Supply and fixing acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in Repairs for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L preparing new steel surfaces over 10 cm in width or girth of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.
S&F in repair Rotational moulded polythylene water storage tank tripple layer in white colour of capacity 500 lts (Cylindrical, Vertical with closed top) in position with 20mm float ball including dismantling of the old unserviceable water tank of RCC /PVC and complete all as specified and directed.
S&F in repair Rotational moulded polythylene water storage tank tripple layer in white colour of capacity 1000 lts (Cylindrical, Vertical with closed top) in position with 20mm float ball including dismantling of the old unserviceable water tank of RCC / PVC and complete all as specified and directed.
S&F in repair 15 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15 mm dia ball valves high pressure of PTMTwith epoxy coated alluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair 20mm dia ball valves high pressure of PTMTwith epoxy coated alluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S & F in repair PVC waste pipe 32 / 40 mm dia of standard length suitable for WHB or for sink as required at site complete all as specified and directed.
Taking down eaves gutter or RWP of any description complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110mm dia PVC bend any radius incl benching of bends provided at ground surface in PCC 1:3:6 and complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.
S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.
S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.
S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.
S&F, PVC Nahani trap 75mm bore with grating incl jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
providing and fixing 30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 n (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws for WC/bathroom/toilet/Kitchen/Balcony doors complete all as specified and directed.
Providing and fixing factory made 100% solid WPC (wood polymer composite)- door frame of size 75mmx50mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60(suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for WC/Bathroom/Toilet and external uses complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level), including removing out of MD Land complete all as specified and directed.
M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded graded stone aggregate) in ,sub base of flooring/ hard standing and complete all as specified and directed.
M&L Chequered cement concrete tiles of 25 mm thick of size 300mm x 300 mm over 15 mm thick bedding of CM 1:6 in floors ,set,jointed and pointed in neat cement slurry with gray cement and red/ yellow pigment complete all as specified and directed.
Demolition of tiles of any thickness, laid, bedded and pointed in any mortar complete all as specified and directed.
moti construction company
B B BUILDERS
M/s Rao Constructions, 1173 Urban Estate-II, Hisar
malik constructions
M/S RAJESH KUMAR & SONS
Siya constructions
YASHU CONTRACTORS
M/S SM BUILDER CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .