Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹6.5 L
Closing Date
21 Dec 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Single Packet
Normal Tender
Yes
30/11/2026 15:00
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
120 days
Expenditure
General
P2
2 conditions · 1 needing a document upload
Eligibility Criteria shall be as per clauses 53.1 to 53.6 of Specification. Note: Certificate of Performance in the revised format under Annexure V (amended -11.11.2026) is attached as Documents attached to Tender
"Class-I and Class-II Local Suppliers" only are eligible to bid in the tender as per Public Procurement Order (preference to Make in India) issued by DPIIT vide Order No.P-45021/2/2017-PP(BE-II)-Part(4)Vol.II dated 19.07.2024, as revised time to time and the same shall be applicable.
72 conditions · 12 needing a document upload
This is an e-tender Manual offers/bids for this tender will not be considered under any circumstances, only electronic offers/bids shall be considered.
Have you remitted the EMD amount or enclosed requisite document if claiming exemption from EMD?
Have you kept your offer validity for period as mentioned in NIT header?
Have you indicated the percentage of Local Content in the relevant column?
Have you submitted the details of location(s) at which local value addition is made/proposed?
Have you attached the CA Certificate for the local content if you claim to be a local supplier?
Have you attached UDYAM Certificate if you claim to avail benefit and preferential treatment as MSE?
Have you indicated correct HSN Code for the offered item?
Have you mentioned the make/brand of the OEM ?
EARNEST MONEY DEPOSIT & SECURITY DEPOSIT : EMD and SD is applicable as per Corrigendum Dated: 01.07.2026 to RWF-e-OT Bid Document SECTION-I, II & IV, attached to tender. 1) Submission of EMD is mandatory subject to exemptions mentioned under Section-I of Corrigendum dtd.01.07.2026 to RWF e- OT Bid Doc enclosed. 2)Security Deposit will have to be remitted @ 5% of the value of contract.
Bidders seeking exemption from EMD or bidders participating in tenders floated with NIL EMD need to sign "Bid Securing Declaration" otherwise the offer will be summarily rejected. The Bidders shall sign the Bid Securing Declaration electronically as part of IREPS format or alternatively they may sign and upload the Bid Securing Declaration (format enclosed) along with the offer.
WARRANTY (Clause 57.0 of Specification) : Warranty period for M&P will be 24 (twenty-four) months from the date of issuance of FAT certificate. A Maximum period of 2 (two) weeks will be allowed for attending and rectification of faults during the warranty period. Warranty terms is detailed in clause 57 of Specification.
Supplier shall furnish their GSTIN No and the HSN Code for the items quoted.
WARRANTY SECURITY DEPOSIT- PERFORMANCE / WARRANTY BANK GUARANTEE : For Machinery and Plant items, costly equipment and capital Spares, the Contractor will have to furnish a Performance / Warranty Bank Guarantee for 5% of contract value to cover their warranty obligations under the contract, valid for Warranty period plus six (6) months claim period.
Benefits and preferential treatment extended to MSEs in compliance to Public Procurement Policy [Preference to MSE] Order 2012 is applicable. Notes: i) Criteria for classification of Enterprises based on investment and turnover vide Gazette Notification dated 26.06.2020, as amended time to time, issued by the Ministry of MSME is applicable in the tender. In case conditions contained in above notification contradict with any of the tender conditions, conditions contained in above notification, as amended, will prevail. ii) As per extant guidelines an enterprise registered as MSE firm with any other organization under the Ministry of Micro, Small and Medium Enterprises shall register itself under UDYAM Registration for getting MSE benefit under this clause. Classification of Enterprise as Micro, Small or Medium Enterprise shall only be considered on the basis of UDYAM Certificate. Vendors claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises (MSEs) must necessarily upload relevant documents with their offer. i. e. complete UDYAM certificate indicating social status of the MSE ie whether owned by SC/ST/Women. iii) MSE benefit will not be applicable for the traders/authorized dealers/agents. iv) Vendors claiming MSE benefits/preferential treatment, despite upward re-classification, must upload document confirming their MSE status within a span of 03 years preceding from the date of closing of the tender, else status of such vendors shall not be considered as MSE .
If you are not an MSE or a consortia of MSE formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise (in percentage of order value) with further category breakup of MSEs owned by SC/ST (Information will be provided in percentage terms with 7 fields; Micro owned by SC, Micro owned by ST, Micro owned by others, Small industry owned by SC, Small industry owned by ST, Small industry owned by others, MSEs owned by Women).
The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers of GST [Designation, address and email id]. In case of award of a contract, a copy of the LOA/Purchase Order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officer of GST mentioned in the Tenderer's bid.
Bidders may please note that entities of countries which have been identified by the Nodal Ministry/Department as not allowing Indian companies to participate in their Government procurement for any item related to that Ministry/Department shall not be allowed to participate in Government procurement in India for all items related to that nodal Ministry/Department, except for the list of items published by the Ministry/Department permitting their participation. The terms of entity of a country shall have the same meaning as in the FDI policy of DPIIT as amended from time to time.
It will be presumed that the firms who have submitted the e-bid have gone through and accepted all the terms and conditions of tender, until and unless any deviations from these terms and conditions have been indicated specifically, under the column "Technical Deviations" and "Commercial Deviations". If space available under these columns is not considered adequate, tenderers can upload a "Statement of Deviations" and a reference of uploaded deviation statement shall be given in column of "Technical or Commercial Deviation Statement". If there is any contradiction between any techno-commercial terms and conditions quoted in e-offer and any documents attached along with the e-offer, the terms & conditions quoted in e-offer will prevail. Tenderers in their own interest are advised not to quote any techno- commercial terms & conditions in any attached documents.
The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote the correct HSN code and upload the document. Misclassification in HSN code, if quoted by any bidder, shall be dealt as per following conditions:- 1. The Purchaser shall not be responsible for any misclassification of HSN Number or incorrect GST rate, if quoted by the bidder. 2. Any increase in GST rate due to misclassification of HSN number shall have to be absorbed by the supplier. 3. Wherever the successful bidder invoices the goods at GST rate or HSN Number which is different from that incorporated in the purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in Purchase Order or billed. 4. Vendors will be required to adjust basic price to the extent required by higher tax billed as per invoice to match the all- inclusive price as mentioned in the Purchase Order.
PRE-BID CONFERENCE: A pre-bid conference will be held offline prior to opening of tender at the Meeting Room of PCMM Office on 30.11.26 at 15:00 hrs. Prospective Vendors willing to participate in pre-bid meeting may kindly confirm their participation and submit their queries in advance before 26.11.26 through e-mail to email ID: [email protected] (or) d y c m m . 1 @ r w f . r a i l n e t . g o v . i n for discussion in the Conference. Queries received beyond 17:00 hrs of 26.11.26 may not be entertained.The tenderers who wish to attend pre-bid conference must report at least 30 minutes in advance. Not more than 02 participants per tenderer will be permitted for the pre- bid conference. In case of a consortium, a maximum of 03 participants may be permitted.As a result of pre-bid conference, modifications to the tender, if any required, shall be made in the form of an addendum/addenda. Clarification for the issues raised in pre-bid conference will be uploaded in the tender document on IREPS as a corrigendum to the tender.
MAKE IN INDIA POLICY : (a) The 'Class-I local supplier'/'Class-II local supplier', at the time of tender, bidding or solicitation shall be required to indicate percentage of local content and provide self- certification that the item offered meets the local content requirement for 'Class-I local supplier'/'Class-II local supplier', as the case may be. (b) The 'Class-I local supplier'/'Class-II local supplier' shall also give details of the location(s) at which the local value addition is made. In case the same is not indicated, the works address of manufacturing in India shall be deemed to be the location at which local value addition is made. (c) In case the contractor / supplier does not meet the stipulated local content requirement and the category of the supplier changes from Class-I to Class- II/Non-local or from Class-II to Non-local, a penalty up to 10% of the contract value shall be imposed. However, contract once awarded shall not be terminated on this account.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
2 conditions
Validity of Offer: No deviation from the offer validity period stipulated in the NIT is permitted. Offers quoted with shorter validity shall be deemed as commercially unresponsive and shall be summarily rejected.
Bidders must quote on FIRM price basis only as price is not subject to any variation. Offers quoted with Price Variation Clause (PVC) will be considered unresponsive and will be summarily rejected.
1 location across Karnataka · 1 Numbers total
Design, Manufacture, Supply, Erection, Testing and Commissioning of the EOT Crane.
P2265950~RWF
P2265950
Open - Indigenous
Goods
Bengaluru Urban, Karnataka
₹0
₹6.5 L
13 Nov 2026
13 Nov 2026
30 Nov 2026
1 item · 1 Numbers total
Design, Manufacture, Supply, Erection, Testing and Commissioning of the 15/2 T EOT CRANE WITH SPAN OF 25.45M FOR EXTENSION OF NEW FORGE COMPLEX BLOOM YARD, INCLUDING COST OF SPAR ES (as per Clause 1.2), AS PER RWF TECHNICAL SPECIFICATION NO.RWF/M/M&P/AFS/2026/15_2T EOT enclo sed and Amendment sheet to Specification enclosed. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE AXLE FORGE SHOP, RWF | Karnataka | 1.00 Numbers |
| Total | 1 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5089048.pdf
ATTACHMENT
5964516.pdf
ATTACHMENT
5759709.pdf
ATTACHMENT
5089050.pdf
ATTACHMENT
5089049.pdf
ATTACHMENT
5907355.pdf
ATTACHMENT
5907366.pdf
ATTACHMENT
5907372.pdf
ATTACHMENT
5388762.pdf
ATTACHMENT
5829886.pdf
ATTACHMENT
5826068.pdf
ATTACHMENT
5864466.pdf
ATTACHMENT
5864470.pdf
ATTACHMENT
5864473.pdf
ATTACHMENT
5907336.pdf
ATTACHMENT
5907329.pdf
ATTACHMENT
5864672.pdf
ATTACHMENT
5759707.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .