Repair and Maintanance of Amma Unavagam at Shanmugam Road in Ward No.49 in Zone-4

Amount

Supplying and fixing in position of FALSE CEILING ARRANGEMENTS with aluminium anodised ' T' Section and 'L' angle frame work of grid size 60x60cm with aluminium T section and 'L' angel of size 25x25x2mm thick and the same is supported @ suitable intervals byadjustable type 6mm dia MS rod with suitable threaded nuts suspended rods hung from ceiling at 120cm c/c in both directions and fixing 60x60cmx20mm thick thermocole in the grid so as to give a seat to false ceiling including painting the 6mm dia MS rod etc.,complete complying with standard speificat- ions. Necessary opening and arrangementsfor fixing electrical fitings should be provided with suitable frame work etc., complete.

Painting the old walls and ceIling with two coats with plastic emulsion paint including thorogh scrapping, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification.

Supply, delivery and of 6m thick Vinail sheet including cost and conveyace material to work site including all the labour charges for fixing etc complete

Repair and Service to Streem Boiler line replace including all other material and labour charges etc, completed

Repair and Service to pulverizer including all other material and labour charges etc, completed

Supply and fixing of single box type 4'36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting Sd 87

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. SD 110

Supply and fixing of industerial exhaust fan 460 mm size with lover type finish and making cutting of window and maken wooden boxing work etc complete

Supply and fixing of LED 18 W ceiling fixture lumanaries Acrilic metalic fiiting condesor type with bulbs philps/havells/suriya including cost and conveyance of all materials and including all labour charges etc complete

Supply, delivery and fixing of 100Amps Porcelain Fuse unit including all materials and all other labour charges etc. complete.

Supply , delivery and fixing of 63Amps Change over box including all materials and all other labour charges etc. complete.

Supply and Delivery of follwing Amma Unavagam Cooking Vesal including cost and conveyance of all materials, and all other labour charges etc.complete

Knife

Rice Laddle

Kuzhl Laddle

SS Plate

Water Tumbler

Anna Koodai

SS Bucket

Lighter

Idly Cooker

MS Kadai

Grinder

Refridgerator

Cooker

Stove

Dabara Set

Dabara Set Cap

Jarini

High pressure industetrial Burner

Repair and service to amma unavagam idly cooker and replaced by 32mm dia SS Valve 4 Nos, 25mm dia SS Valve 2 Nos, 32mm dia SS Union 5 Nos, SS Hex Nipple 5 Nos, 32mm GI dia Elbow 3 Nos, 32mm GI dia Tee 4 Nos, 32mm dia GI Pipe 1 mtr, SS Hiper brase valve 4 Nos, Door Keel 4 Nos, and Gas cut 4 Nos including cost of all materials, labour charges, testing and Transporting charges etc, complete

Construction of inspection chamber of size 60 cm x 60 cm x 60 cm with 75mm thick RCC loose slabs covering in C.M. 1:2:4 mix including necessary reinforcement and earth work excavation for foundation wth 23 cm thick concrete bed using 40mm B.J. concrete in CC 1:4:10 for foundation brick work in CM 1:6 for chamber as directed during theexecution including plastering with CM 1:3, 12mm thick, benching and channelly etc

Supply and fixing in position of ALUMINIUM ANODISED PARTISION with 62x38x2mm extruded diamond section at bottom vertical and horizontal members. The vertical member are spaced at 90cm c/c and to horizontal members are space at 90mm and 90mm height the panel should be covered including necessary dismantling holes in RCC columns, beams masonary wherever necessary with power drill the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the aluminium sections should be anodised to 1.5 microns as per ISI specification 1868/1962 and should be got approved by the executive engineer before use.

Supplying, fabrication and fixing in position of aluminuium natural colour matt finish Aluminium Three Track window of size 1.80m x 2.10m half glazed and half plb board fully 12mm thick board fully 5.5mm thick glazed door using rectangular aluminium box section of following sizes of frames and shutters with necessary accessories such as rubber beading, aluminium clips, best double action floor spring door closeer, handle locks and glass including all materials labour and power consumption charges required for fabrication if necessary chiopping dismantling making necessary holes in RCC columns, beams or masonary wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc., complete. The aluminium surface must be anodised with matt finish under electrically controlled condition in accordance with IS specifications 1868/1962 of anodic film thickness of not less than 15 microns for all sections. All the materials should be got approved by the Engineer in charge before fixing as directed

M/S.RIYA ENTERPRISES (BID ID -1130364)