Loading
Loading…
Loading…
Tender Value
₹52.4 L
EMD Value
₹1.0 L
Closing Date
12 Oct 2026, 12:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
CIVIL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Definition of similar work:- Any Civil Engineering work
19 conditions · 4 needing a document upload
Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. Annexure Description 1. Annexure-I(a) Details of the Works Completed by the Tenderer during the last seven years to be filled & submitted as per Annexure-I(a). 2. Annexure-I(b) Details of contractual payment received by the Tenderer during the last 3 (three) financial years including the current financial year to be filled & submitted in Annexure-I(b). 3 Annexure-II Details of Plants and Machinery with the Tenderer to be filled & submitted as per Annexure- II. 4 Annexure-III Details of Personnel and Organization of the Tenderer to be filled & submitted as per Annexure-III. 5 Annexure-IV Details of Works Presently on hand of the Tenderer to be filled & submitted as per Annexure- IV. 6 Annexure-V Details regarding Association of Railway Officer(s) with the tenderer to be filled & submitted as per Annexure- V. 7 Annexure-VI List of the Arbitration Cases of the Tenderer during last five years to be filled & submitted as per Annexure-VI. 8 Annexure-VII List of the Court Cases of the Tenderer during last Five years to be filled & submitted in Annexure- VII. 9 Annexure- VIII NEFT MANDATE FORM. All Payments to the agency (including the refund of the Bid Security of the unsuccessful bidder preferably) will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure- VIII. 10 Annexure-IX GST COMPLAINT INVOICE : To be filled & submitted as per Annexure-IX. 11 Annexure-X FORMAT FOR CERTIFICATE TO BE SUBMITTED / UPLOADED BY TENDERER ALONGWITH THE TENDER DOCUMENTS as per Annexure-X. 12. Annexure-X(A)-This certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. 13. Annexure-XI LETTER OF CREDIT: To be filled & submitted as per Annexure-XI. 14.Annexure-XII BID SECURITY: Bank Guarantee Bond from any scheduled commercial bank of India to be filled & submitted as per Annexure-XII. 15.Annexure-XIII Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) to be filled & submitted as per Annexure-XIII. 16. Annexure- XIV TENDER FORM (FIRST SHEET)- Tender Form (First Sheet) to be filled & submitted as per Annexure-XIV. 17.Annexure-XV TENDERER'S CREDENTIALS (BID CAPACITY) to be submitted as per Annexure-XV. (This annexure will be applicable, if tender having advertised value more than Rs 10 crore wherein eligibility criteria includes bid capacity)
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT , etc. are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII,IX,XI, XII, XIII, XIV. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Open Tender for infrastructure improvement of Heritage building in connection with the station Mahostsav in the jurisdiction of AEN/HQ/ASN under Sr. DEN/1/ASN.
O-AC-T-137-26-27~ER
O-AC-T-137-26-27
Open
Works - General
4 Months
Paschim Bardhaman, West Bengal
₹0
₹1.0 L
15 Sept 2026
15 Sept 2026
28 Sept 2026
85 items across 3 schedules · ₹4,84,171 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 1km | cum | 30 | 174.04 | 5,221.2 |
| 2 | All kinds of soil | cum | 15 | 177.5 | 2,662.5 |
| 3 | All kinds of soil | Sqm | 200 | 34.15 | 6,830 |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 300 | 17.6 | 5,280 |
| 5 | 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 4 | 8,340.85 | 33,363.4 |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 15 | 7,878.5 | 1,18,177.5 |
| 7 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 2 | 10,585.9 | 21,171.8 |
| 8 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 200 | 107.85 | 21,570 |
| 9 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 2 | 7,370.65 | 14,741.3 |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 2 | 9,105.95 | 18,211.9 |
| 11 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 10 | 1,123.8 | 11,238 |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 60 | 1,267.95 | 76,077 |
| 13 | Kiln seasoned and chemically treated hollock wood | cum | .3 | 83,378.05 | 25,013.42 |
| 14 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 8 | 3,473.85 | 27,790.8 |
| 15 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 12 | 3,167.95 | 38,015.4 |
| 16 | Fire retardant plywood conforming to IS: 5509 | Sqm | 40 | 2,777.7 | 1,11,108 |
| 17 | 1.0 mm thick | Sqm | 65 | 897.3 | 58,324.5 |
| 18 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 3200 | 133.7 | 4,27,840 |
| 19 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 160 | 772.4 | 1,23,584 |
| 20 | 4.0 mm thick glass panes | Sqm | 20 | 1,064.65 | 21,293 |
| 21 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 32 | 614.2 | 19,654.4 |
| 22 | Dark shade pigment using ordinary cement | Sqm | 60 | 1,119.5 | 67,170 |
| 23 | 25 mm thick | Sqm | 100 | 1,948.25 | 1,94,825 |
| 24 | Size of Tile 600 x 600 mm | Sqm | 160 | 1,453.65 | 2,32,584 |
| 25 | Size of Tile 600 x 1200 mm | Sqm | 140 | 1,577.15 | 2,20,801 |
| 26 | Size of Tile 600 x 600 mm | Sqm | 40 | 1,464.85 | 58,594 |
| 27 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 16 | 3,186.7 | 50,987.2 |
| 28 | 0.63 mm thick with zinc coating not less than 275 gm/ m2 | Sqm | 80 | 1,087.65 | 87,012 |
| 29 | 0.63 mm thick with zinc coating not less than 275 gm/m2 | Metre | 40 | 980.5 | 39,220 |
| 30 | 110 mm diameter | Metre | 50 | 377.4 | 18,870 |
| 31 | 110 mm bend | Each | 5 | 150.35 | 751.75 |
| 32 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 90 | 738.65 | 66,478.5 |
| 33 | 1:6 (1 cement: 6 coarse sand) | Sqm | 200 | 343.65 | 68,730 |
| 34 | 12 mm cement plaster | Sqm | 20 | 449.55 | 8,991 |
| 35 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 700 | 262.7 | 1,83,890 |
| 36 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 800 | 176.25 | 1,41,000 |
| 37 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Sqm | 2800 | 67.4 | 1,88,720 |
| 38 | Two or more coats on new works including a coat of wood filler | Sqm | 180 | 446.25 | 80,325 |
| 39 | Old work (one or more coats) | Sqm | 300 | 62.7 | 18,810 |
| 40 | Two coats | Sqm | 3000 | 142.8 | 4,28,400 |
| 41 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 3000 | 19.75 | 59,250 |
| 42 | One or more coats on old work | Sqm | 700 | 102.8 | 71,960 |
| 43 | One or more coats on old work | Sqm | 5000 | 107.25 | 5,36,250 |
| 44 | One or more coats on old work | Sqm | 40 | 224.8 | 8,992 |
| 45 | Re-lettering with black Japan paint of approved brand and manufacture. | per letter per cm height | 20000 | 3.85 | 77,000 |
| 46 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | Sqm | 1500 | 112.9 | 1,69,350 |
| 47 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 5000 | 120.75 | 6,03,750 |
| 48 | 20 mm diameter. | Metre | 30 | 343.5 | 10,305 |
| 49 | 3 mm thick | Sqm | 270 | 537.45 | 1,45,111.5 |
| 50 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) | cum | 6 | 1,503.6 | 9,021.6 |
| 51 | In cement mortar | cum | 3 | 2,060.2 | 6,180.6 |
| 52 | Of area 3 sq. metres and below | Each | 8 | 367.2 | 2,937.6 |
| 53 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | Kg | 800 | 5.65 | 4,520 |
| 54 | For thickness of tiles 10 mm to 25 mm | Sqm | 600 | 73.4 | 44,040 |
| 55 | G.S. Sheet | Sqm | 120 | 164.95 | 19,794 |
| 56 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 60 | 54.65 | 3,279 |
| 57 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 90 | 2,017.6 | 1,81,584 |
| 58 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 2 | 6,767.4 | 13,534.8 |
| 59 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 2 | 6,515.55 | 13,031.1 |
| 60 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 2 | 1,879.2 | 3,758.4 |
| 61 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 2 | 1,683.35 | 3,366.7 |
| 62 | 32 mm dia | Each | 5 | 119.55 | 597.75 |
| 63 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 2000 | 11 | 22,000 |
| 64 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 240 | 530.9 | 1,27,416 |
| 65 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 190 | 634.45 | 1,20,545.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-X_1.pdf
ATTACHMENT
Tenderdocuments.pdf
ATTACHMENT
AnnexuresforCommercialcompliances.pdf Annexures for Commercial Compliance
ATTACHMENT
ANNEXURE-X_A_.pdf
ATTACHMENT
AdvCSGCC2022.pdf
ATTACHMENT
Annexuresoftechnicalcompliancess.pdf
ATTACHMENT
JPOTelecomcircular9of2023_1.pdf
ATTACHMENT
GCC-2022_3.pdf
ATTACHMENT
Advancecorrectionslip11GCC2022.pdf
ATTACHMENT
AnnexuresforCommercialcompliances.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .