REPAIR TO BOUNDARY WALL, CHAINLINK FENCING AND MAINT/REPAIR IN OTM AND MD ACCN AT TKD UNDER GE BABINA

Amount

Demoliton of brick work built in cement mortar as in drain, wall complete all as specified and directed.

M&L brick work with fly ash 'bricks (FASB) confirming to IS 12894, of strength M-10, straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed

M&L walling of random rubble uncoursed well bonded bedded and solidlly hearted built in cement mortar 1:4 complete all as specified and as directed.

M&L walling of random rubble uncoursed well bonded bedded and solidlly hearted built in cement mortar 1:4 except stone complete all as specified and as directed.

M & L PCC 1:2: 4 type B-1 using 20 mm graded store aggregate as in surface channel, drains etc including use and waste of form work where necessary complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed..

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Add for each 25 mm girth or part them of over or under 30cm ditto.

M & L 15 mm thick rendering in cement mortar 1:4 on brick/ stone or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M & L two coat of white wash on newly plastered surface after preparation of surface all as specified and directed.

M & L one coat of white wash on old plastered surface after preparation of surface all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level complete all as specified and as directed.

M & L PCC 1:3:6 type C-1 using 20 mm graded store aggregate as in coping/surface channel /drains/wall complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone agg) in foundations, filling and mass concrete complete all as specified and directed

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bedding in CM 1:4 specified and directed by engr-in-charge.

Dismantling of existing RCC, wood, or steel fencing post embedded in concrete, brick work etc including taking out embedded portion of post in concrete and making good to disturbed ground complete all as specified and as directed .

S&F joist , channel angle or tie sections fixed independently without connecting plates etc ( cut to ordinary length ie, within 20 mm of the length indicated and drilling holes and bending etc as required ) conforming to Fe 310-0 or Fe 410-0 complete all as specified and as directed .

S&F Galvanized two strands steel barbed wire 2.24 mm dia barbed with 2.00 mm dia barbs at 75 mm spacing and straining and fixing to any type of strandard rails straining bolts including securing or laying at crossing with and provn of galvanized mild steel wire staples are steel pins complete all as specified and as directed .

M&L for framed work such as in doors or gate or angle or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hook and hinges (exclusive steel sheeting or other covering running rails and guids ) and hanging also fastening and fixing conforming to Fe-410(Gde E-250) quality B complete all as specified and as directed.

Dismentling iron work in any description complete all as specified and as directed.

M& L for chain link MS galvanized fencing including line wires, dia of chain link n less than 3.5mm any mesh, size and type to any type of standards rails, straining bolts etc complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any descripition complete all as specified and as directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified.

M&L renderig/screeding 15mm thick cement mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge.

M&L renderig 15mm thick cment mortar 1:4 on other than fair faces of brick or concrete surface of wall rendering is to be finished even and smooth with out using extra cement complete all as directed by the Engineer - In- Charge.

Materials and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as directed by the Engineer - In- Charge.

Materials and labour for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as directed by the Engineer - In- Charge.

Demolition of cement concrete (unreinfored ) in ground floor and paving n,exc 15cm thickness below or above ground level) complete all as specified and as directed

M&L 40 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate)as in floor complete all as specified and as directed

M&L Glass dividing strips , 3 mm thick and 22 mm width complete all as specified and as directed.

M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, path laid in panel surface finished even and fair complete all as specified and as directed

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

S& F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 15 mm dia complete all as specified and as directed.

Taking up or down existing galvanised/steel iron pipe and connections including cleaning for refixing or removal to store of size 20 mm dia complete all as specified and as directed.

Supply and fixing, jointing and testing galvanised iron tube medium grade 15mm dia bore with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings etc. complete all as specified and directed by Engr-in-Charge. Note:- The rate also included for cutting through walls floors.

Supply and fixing, jointing and testing galvanised iron tube medium grade 20mm dia bore with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings etc. complete all as specified and directed by Engr-in-Charge. Note:- The rate also included for cutting through walls floors.

S& F in repair ball valve 15mm bore dia high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20mm 210 gm) complete all as specified and as directed.

S& F in repair ball valve 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fix (minimum weight 20mm 210 gm) complete all as specified and as directed.

S&F in repairs 15mm bore bib taps cast copper alloy with crutch and butterfly handle screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and as directed.

S&F in repair 15 mm stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union and fixed complete all as specified and as directed.

S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type) complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked with inlet, float valve and handle including bracket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' of size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

Supply and fixed in repairs 15mm dia bore pillar tap cast copper alloy, with capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and fly nut, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repair 32 mm dia bore of PVC waste pipe for kitchen sink and wash hand basin complete all as specified and as directed.

S&F in repair brass chromium plated shower rose 75mm size with long body fancy type including fixing to steel pipe or union complete all as specified and as directed

S&F fancy type PVC sheet coated MS conduit curtain rod 20 to 25mm dia with fancy knob type ends and brackets complete all as specified and directed

Taking down chowkhats or frames with shutter (with out taking off shutter from the frame)n.exc 1.5 sqm each complete all as specified and as directed

Taking down chowkhats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed

Taking down wooden shutters of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and as directed.

S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom. PCC shall be provided in hollow frame in same rates.

Supply and fix mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410 W (Gde E-250) complete all as specified and as directed by the Engr-in-Charge.

S&F solid PVC door frames of size 50mmx47m made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube complete all as per specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing

Supply and fix 35mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

Supply and fix 30 mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.

Supply and fix 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed by Engr-in-Charge.

S&F 150 mm floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring , fixed in floor complete all as specified and as directed by Engr-in-Charge.

Supply and fix 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S/F 150 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified and as directed by Engr-in-Charge.

Supply and fix 250 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

S&F steel window locally fabricated with side hung shutters including box type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded all as specified and directed by Engr-in-charge.

S&F steel window locally fabricated with side hung shutters including box type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded all as specified and directed by Engr-in-charge.

S/F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

S/F in repair galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed.

S&F mild steel work as in framed work as in grill with ends of bars shouldered and or riveted or fixed in spike, framed guard bars confirming to Fe- 410-0 or Fe-310-0 complete all as specified and as directed.

Dismantling floor hearth wall tiling including cement mortar bedding but not backing & removing serviceable meterial to store complete all as specified and as directed by Engr-in-Charge.

Material and labour for colour printed glazed ceramic tiles (Premium quality) (300X200mm) X 6mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1 : 4) complete all as specified and as directed by the Engr-in-Charge.

M&L for vitrified ceramic tiles 600x600x9-10mm thick, light coloured as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed layer in CM 1:6 laid over and including 25mm thick PCC 1:2:4 type B0 using 12.5mm stone aggregate sub floor complete all as specified and directed.

M&L for vitrified ceramic tiles size 600x600x9-10mm thick, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed by Engr-in-Charge.

Machine cut Kota stone slab in floor 20-25 mm thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and nosing complete all as specified and directed.

M&L for machine cut Kota stone slab in skirting/vertical surfaces 20 to 25 mm thick laid over and including 10 mm thick rendering in cement mortar 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and nosing complete all as specified and directed.

M&L for granite of any type in full length for kitchen plate form, gate pillar 20 mm thick machine cut bedded and jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade over 20 mm thick screed bed (1:6) including grinding and polishing complete all as specified and as directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment over 5 mm thick sand bed complete all as specified and as directed.

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM (1:6) complete all as specified and directed by engr-in-charge.

Dismantling timber scantlings 40sq. cm and over in section, in any position of framed work complete all as specified and directed by engr-in-charge.

M&L 2nd class hard wood as in scantling clean sawn, timber framed and fixed complete all as specified and as directed.

Dismantling AC sheet roofing with ridge (corugated or semi corrugated) in roof covering complete all as specified and as directed.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs fixed with L type or J type hook bolts complete all as specified and as directed.

S&F asbestos cement one piece plain angular ridge 6mm thick in pair n roofs fixed with L type or J type hook bolts complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugurated steel sheet 0.5 mm thick of any colour having tensible strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified incl preparation pre painted galvalume aluminium zinc coating GI based steel sheet surfaces complete all as specified and directed.

S&F plain galvanised 0.80 mm thick mild steel sheeting in ridges, hips, valley gutters drip and straight flashing with zink coating 275 compelete all as specified and directed. .

S&F in repair 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J type hook complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS. 1161-1998 grade St-240 complete all as specified and directed.

S&F PVC floor trap of size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed

S&F in repair 20mm Gun metal globe or gate vlve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed

Hacking out old broken glass exc 1.5Sqm each (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 3mm thick ordinary quality and glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected

Materials & labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

M&L for anodised aluminium frame straight for doors / windows using aluminium section of minimum size 100x44mmx1.60mm thick fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed

M&L for anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5mm thick plain colour PVC sheet and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.

S & F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified and directed

S & F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets complete all as specified and directed.

M&L for aluminium anodised snap grid frame work of the following (a) Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b) Section alongwith wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c) Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to ceiling by supporting hangers consisting of 6mm dia mild steel rod J bolts nuts and washer etc as per manufacture instructions & complete all as directed.

Materials & labour for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay, complete including taking down old wooden ventilator complete all as specified and directed.

Supply and fix in repairs chromium plated wall mixture with telephone shower arrangement only without crutch (with bush and piston divertor fitting) complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repairs chromium plated wash hand basin mixture with telephone shower arrangement only without crutch (with bush and piston divertor fitting) complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing in repair vitreous China coloured wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, with coloured PVC seat cover and making all necessary connections complete as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) kitchen sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 352mmx 178mm depth or equivalent made of 1mm thick stainless steel sheet with 32mm bore CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repair CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge .

Supply and fix in replacement Chromium Plated towel ring square with round flange complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement hand shower (health faucet) (ABS Chrome palted) with 8mm dia, 1m long, flexible tube with wall hook complete all as specified and as directed by Engineer-in-Charge .

S&F in repair stainless steel kitchen rack plate rack over all size 900mmx900mm make out 0.63mm thick stainless steel sheet complete all as specified and as directed

S&F 18mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge.

S&F 18mm thick Rajshri Celuka ply of grade 1 quality of one side pre-laminated & other side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet /shutters incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge

S&F 12mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make wall mounted kitchen cabinet sides back & pull out shelves inside the cabinets complete all as per specifications and as directed by the Engr-in-Charge

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters, complete all as specified and directed.

S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and directed.

Ms Vinay constructions

PAWAN CONSTRUCTION CO

M/s Ravi Traders

m/s gupta trading

M/S NASIM AND CO.

M/S PRAKASH RAIKWAR TRADERS AND CO