7472 Dt-05/12/2023

L DESK The Manufacturer should have Green Guard certification and should also have International Member Certificate of BIFMA for last 15 years along with products certifications like; BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, ISO 45001:2018, AIOTA on Office Furniture, GRIHA, IGBC, GREENGUARD GOLD and INDOOR ADVANTAGE GOLD certificate. Manufacturer should not be blacklisted in any Govt./Pvt sector offices/banks in the past for supplying below standard quality furniture. All ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. The Main desk RHS size shall be : 2400 Width mm x 1104 Depth mm x 735 Height mm.The top panel shall be 40 mm thick(18 mm MDF + 18 mm MDF batons + 4 mm Natural Veneer) Veneered portion of work surface is finished with high gloss polyster. The understructure shall be having legs made from 1.6 mm thick MS clad with the strips of MFC (Medium Density fiber).Hollow construction of legs facilitates wire management .The modesty & side panel should be 18 mm thick MDF plus pigmented black and coated with melamine. The storage shall be having drawer unit unit body shall be constructed from 18 mm thick MDF boards has combination of 2 box drawers + 1 filling drawer . Drawers should be mounted on double extension ball slides + drawer fronts should be of natural veneer coated with High gloss Polyster and made of 23 mm (18 mm MDF + 4 mm Natural Veneer + 1 mm DL) and drawer body made of 14 mm MDF (12 mm MDF + 1 mm DL + 1 mm DL). The ERU size shall be : 1400 Width mm x 580 Depth mm x 690 Heightmm. The top panel shall be 40 mm thick(18 mm MDF + 18 mm MDF batons + 4 mm Natural Veneer) Veneered portion of work surface is finished with high gloss polyster.The understructure shall be having the modesty panel of 18 mm thick MDF plus pigmented black and coated with melamine. The storage shall be having drawer unit unit body shall be constructed from 18 mm thick MDF boards has combination of 2 box drawers + 1 filling drawer . Drawers should be mounted on double extension ball slides + drawer fronts should be of natural veneer coated with High gloss Polyster and made of 23 mm (18 mm MDF + 4 mm Natural Veneer + 1 mm DL) and drawer body made of 14 mm MDF (12 mm MDF + 1 mm DL + 1 mm DL).

HIGH BACK EXECUTIVE CHAIR The Manufacturer should have Green Guard certification and should also have International Member Certificate of BIFMA for last 15 years along with products certifications like; BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, ISO 45001:2018, AIOTA on Office Furniture, GRIHA, IGBC, GREENGUARD GOLD and INDOOR ADVANTAGE GOLD certificate. Manufacturer should not be blacklisted in any Govt./Pvt sector offices/banks in the past for supplying below standard quality furniture. All ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. SEAT/BACK ASSEMBLY: The seat is made up of 1.2 ± 0.1cm US. hot pressed plywood measured. The Back is made up of injection moulded glass filled nylon & upholstered using Quilted Knitted fabric. SEATSIZE:47.0cm.W)x1.5cm.(D) BACK SIZE : 45 .0 cm.(W) X 65.3 cm.(H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density 45+/-2 kg/m’ and hardness 16 ± 2 kgf as per IS: 7888 for 25% compression. ARMRESTS : The adjustable armrest is designed ith the following features : • Up-Down adjustment— 8 steps (8. 0±0.5 cm range) • Fixed Armrest Top is PU moulded over metal insert LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric The Height of Lumbar pad can be adjusted through two projecting kncbs provided on the rear side of the pad Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. • 360° revolving type • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. *Tilt tension adjustment. * 4-position locking with anti-shock feature. *Seat/back tilting ratio of 1:2. Pneumatic Height Adjustment : The pneumatic height adjustment has adjustment stroke of 10.0 ± 0.3. PEDESTAL ASSEMBLY : The pedestal is febricated from 0.2 ± 0.02 cm thick HR sheet, chrome plated and assembled with injection black polypropylene hut cap and 5 nos. twin wheelcastors. The pedestal is 66.0 ± 0.5cm. Pitch-center dia. (76.0+1.0 cm with castors) TWIN WHEEL CASTORS: The twin wheel castors are in ection moulded in black Nylon. NECKREST : The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam & covered with Polyester fabric. Neckrest is fixed to Back Assembly through Neckrest connector. Neckrest assembly has Weight adjustment of 4.2 ± 0.5 cm and rotation adjustment of oyerat! 76°± 2°. The complete neckrest assembly is retro fit to the main chair."

VERTEX L-SHAPE SOFA RHS The Manufacturer should have Green Guard certification and should also have International Member Certificate of BIFMA for last 15 years along with products certifications like; BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, ISO 45001:2018, AIOTA on Office Furniture, GRIHA IGBC, GREENGUARD GOLD and INDOOR ADVANTAGE GOLD certificate. Manufacturer should not be blacklisted in any Govt./Pvt sector offices/banks in the past for supplying below standard quality furniture. All ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Finish Color: Toffee + Dark grey, Net Weight (kg)-159 Seat Height (cm)-45.5 Dimensions W x H x D (cm)-265.5 x 90 x 210.5, Primary Material-Pinewood Upholstery Material-Fabric + Syn Leather with 3 years frame warranty. The high back sofa offers firm lumbar support which facilities comfortable upright or casual seating. The broad seating space and longer length of the 3 seaters make it an ideal place for napping or relaxed lounging. 100% polyester Anti-Stain fabric is used in the lumbar and seat. Any stains, spills, or soiling should be cleaned up promptly with a neutral soap solution using a cloth in circular movements. The corner junction unit has a two-level matt membrane surface which serves as a generous decking area for books, gadgets, décor articles, etc. The membrane finish armrest serves as a platform for placing mugs, cell phones, laptops, tablets, etc.

ARUSHI ENTERPRISE

M/S MONA ENTERPRISE

TITEM03