REPAIR MAINT OF CERTAIN ITEMS OF STEEL FURNITURE

Amount

REPAIRS TO ALMIRAH LARGE (STEEL) & ALMIRAH MED (STEEL) FD-1032 & E6/MAP/18

(a) M&L for removal of existing unserviceable lock of any description in any position, S&F new lock (steel) 6 levers (Make: Godrej/Voltas) with duplicate key including fixing with suitable machine screws complete all as specificed and directed. For Almirah Med Steel.

(b) All as per item No 1 (a) above but for Almirah Large Steel & Almirah 1/2 H x 1/2 SH

(c) All as per item No 1 (a) above but removal of u/s handle, S & F new chromium plated handle 100 mm long including fixing with suitable nut / pins for Almirah Large & Almirah Med.

(d) All as per 1 (a) but removal of u/s shackles, S & F new steel shackles including fixing with suitable screws

(e) All as per 1 (a) above but removal of u/s 3 way locking device, S & F new 3 way locking device (size of MS rod is 10 mm dia) including steel shackles and fixing with suitable screws / rivets for Almirah large complete all as specified and directed.

(f) All as per 1 (e) above but for Almirah Medium

(g) All as per 1 (a) above but removal of u/s legs, S & F new legs made of PGI sheet of 1 mm thick, fixing with suitable size rivets and gas welding as reqd all as specified and shown on drg and as directed for Almirah large and Almirah medium

(h) M&L for gas welding at damaged portions/joints all as specified and directed by Engineer-in-charge (each joint is to be measured seperately)

(j) M&L for removal of dents, filling with putty, preparation of old painted surfaces and applyging one coat of spray painting of approved shade (synthetic enamel paint) complete for internal / external surfaces all as directed by Engineer-in-charge for Almirah large

(k) All as per 1 (k) above but for Almirah Medium

REPAIRS TO TEAPOY VERANDAH FD/E6/MAP/17

(a) M&L removal/ taking out carefully of old existing broken top of teapoy in any position and S&F new top made of 18mm thick prelaminated particle board one side laminated & other side white balancing, exterior grade, including 4mm thick teak wood beading all round, fixed in position all as shown on drg, complete all as specified and directed.

(b) S&F new rubber ring/shoe of superior quality with suitable screws, complete all as specified and directed.

(c) M&L for preparation of the old painted surfaces of teapoy and applying one coat of painting with black synthectic enamel paint over one coat of red oxide coat of polishing for beading of top, complete all as specified and directed.

REPAIR TO CHARPOY GI FOLDING FD/MAP-II/01

(a) M&L for continuous welding of charpoy GI folding long rail weldede with head board & foot board (four spot in each charpoy folding) complete all as speified and directed

(b) M&L for removing of unserviceable plywood of charpoy GI folding replaced by 12mm thick plywoood commercial (ISI Marked) IS 303 size as shown on drg, complete all as specified and directed.

(c) M&L for preparetion of the old painted surfaces of charpoy GI folding and applying one coat of painting with synthetic enamel paint over one coat of red oxide primer on welded surface, conplete all as specified and directed Note:- Painting shall be carried on welded surfaces to match the exixting colour / surface.

REPAIR TO BED HARD STEEL FD/E6/MAP/08 (R)

(a) M&L for welding of Bed hard long rail welded with head board & foot board (four spot in each hard bed) complete all as specified and directed.

(b) M&L for removing of unserviceable plywood of bed hard steel replaced by 12mm thick plywood commercial (ISI marked) IS 303 size as shown on drg, complete all as specified and directed.

(c) M&L for preparation of the old painted surfaces of bed hard and applying one coat of painting with synthectic enamel paint over one coat of red oxide primer on welded surfaces, complete all as specified and directed.

Repair to chair visitor with arm/chair computer with arm/chair revolving low back, by taking out the following worked out components with out damaging the existing components and replacing the same with new componants all as directed by Engrs-in-Charge.

(a) Removing of unserviceable coushion with tapestry cloth of seat and back frame and replacing same with new coushion with tapestry cloth as approved

(b) Removing unserviceable/damage custer wheel at chair revolving & supply and fixing new custor wheel as per sample approved

(c) Removing unservicable hand rest and supply and fixing new hand rest maintaning the old hand rest.

(d) S & F new revolving cistern all as specified and directed.

(e) S & F new base complate all as specified and directed.

Repair to chair revolving high/long back including takingout the following components all as directed by Engr-in-Charge

(a) Removing of unservicable cushion with tapestry cloth/rexine at seat anc base frame and replacing the same with new cushion with tapestry cloth/Rexine as approved by GE

(b) Removing unserviceable/damage custer wheel and fixing new custer wheel as per sample approved by GE.

(c) Remove unservicable hand rest and supply and fixing new hand rest maintaning the old hand rest

(d) S & F new revolving cistern complete all as specified and directed.

(e) S & F new base complete all as specified and directed.

REPAIRS TO CHAIR VERANDAH FD-256

(a) M&L for preperation of broken joints and continous welding of chair all as specified and directed (each joint to be measured seperately)

(b) M&L for the preperation of old painted surfaces of chair and applying one coat of painting with white synthetic enamel paint all as specified and directed

(c) S&F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete as shown on drg and as directed

(d) M&L for removal of existing unserviceable cane and recanning of chair with new 4mm wide plastic cane of besr quality and in matt pattern complete all as specified and directed

REPAIR TO CHAIR CB STEEL WITH/ WITHOUT ARMS FD-75(M)

(a) M&L for removal of old unserviceable plastic cane and recanning of chair with new 2mm wide plastic cane of best qulaity in matt pattern complete all as specified and directed.

(b) M&L for removing/taking out of old exisxting unserviceable arm rest handle of chair in any position and S&F new arm rest handle of 1st class hard wood (teak wood) with 02 Nos of suitable steel screew all as shown on drg complete all as specified and directed.

(c) M&L for preperation of broken joints and welding of chair all as specified and directed (each joint to be measured seperately)

(d) M&L for the preperation of old painted surfaces of chair and applying one coat of painting with olive green synthetic enamel paint all as specified and directed

REPAIRS TO TABLE OFFICE CLERK STEEL FD-1003

(a) M&L for removal of unserviceable top of table in any position, S&F new top made of 18mm thick prelaminated particle board one side laminated and other side white balancing, exterior grade, including 4mm thick teak wood beading all around fixed in position all as shown on drg for table office clerk steel, complete all specified and directed

REPAIR TO TABLE 3 X 3 STEEL (900 X 900 X 760MM) FD-291

(a) M&L for removal of unserviceable top of table in any position, S&F new top made of 18mm thick prelaminated particle board one side laminated and other side white balancing, exterior grade, including 4mm thick teak wood beading all around fixed in position all as shown on drg for table , complete all specified and directed

Veer Brothers