CERTAIN SPECIAL REPAIR AND MINOR WORKS AT MIRAN SAHIB UNDER GE JAMMU

Amount

B/R Portion: - Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness any type including cover fillets complete all as specified and directed.

Dismantling of old steel as purlin and trusses complete all as specified and as directed.

Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work as in wind tie, grill grating etc complete all as specified and as directed.

Supply and fixing Structural steel / tubular section work as in posts, roof trusses ( framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or MS tube pipe) including distance pieces, cleats etc Fe-410W (GdeE-250) quality 'A' including one shop coat of primer complete all as specified and as directed.

Material and labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate, base plate etc complete all as specified and as directed.

Supply and fixing mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long (dia of neck exceeding 12 but not exceeding 20 mm) complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5 Sqmm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 Sqmm but not exceeding 4 Sqmm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for removing of existing treatment (scrubbing, washing down etc) of old plaster or painted surfaces of wall complete all as specified and directed.

Material and labour for 15 mm thick rendering in CM 1:6 on surfaces other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 5mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified and directed.

Material and labour for preparation of surface and applying three coats of white wash on newly plastered surfaces of ceiling complete all as specified and as directed.

Material and labour rendering 20mm thick in CM 1:4 on concrete surface such as chajjas, upward fascias, roof surfaces and similar items including two or more dubbing coat, surface finished even and fair without using extra cement including mixing of liquid water proofing compound upto height of four storeyed building with all necessary formwork, scaffolding, lifting arrangement for external surface upto 4 storey buildings complete all as specified and as directed by Engineer-in-Charge. Note: - Liquid water proofing compound shall be measured and paid separately.

Material and labour washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1 / 2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed.

Material and labour for preparation of surface and applying two coats of oil bound distemper on one coat of suitable primer complete all as specified and as directed.

Material and labour for preparation of old / new surface and applying two coats of exterior emulsion / weather proof paint over primer on plastered surface complete all as specified and as directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85 / 25 or 80 / 100 grade and three parts of sand (all by weight) complete all as specified and as directed.

Material and labour for preparation of old plaster or painted surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Supplying and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Supplying and fixing factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded prelaminated PVC sheet on front face and 2 mm thick plain color PVC sheet on back face, supply and fixing in frame at site as per specification and drawing complete all as specified and as directed.

Supply and fixing 35mm thick factory made wooden moulded panel door shutter with masonite facing on both side of (two, three, or four panel design as approved) made of solid core using machine filled rigid expanded polyurethane foam. The door facing plate shall be 3.2mm thick complete all as specified and as directed.

Supply and fixing 40 mm flush shutter solid core construction with particle board core and plywood face panels commercial type on both sides complete all as specified and as directed.

Supply and fixing 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.20 (a) complete all as specified and as directed.

Supply and fixing box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section having 1.6mm thickness and of size 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long, mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and as directed. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm iron flat 200 mm long. (iii) PCC block for embedding lugs.

Supply and fixing pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105 x 60mm including bottom of each chowkat to be welded with 2 No's 25 x 25 x 3mm thick flat iron projecting 10 cm on either side complete all as specified and as directed.

Supply and fixing pressed steel frames (factory made) made out of size 1.25mm thick MS steel for door with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate etc complete of size 125 x 60mm including bottom of each chowkat to be welded with 2 No's 25 x 25 x 3mm thick flat iron projecting 10 cm on either side for fixing of two shutters complete all as specified and as directed.

Supply and fixing pressed steel frames (factory made) made out of size 1.25mm thick MS steel for door with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate etc complete of size 60 X 40mm including bottom of each chowkat to be welded with 2 No's 25 x 25 x 3mm thick flat iron projecting 10 cm on either side for fixing of two shutters complete all as specified and as directed.

Supply and fixing mild steel framed works such as grills, framed guard bars, etc and similar work as in cooler stands etc. conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Supply and fixing 16 / 18 mm PVC moulded cellulose board prelaminated one side with decorative choice lamination and other side balancing with lamination complete all as specified and as directed.

Material and labour for 18mm wide PVC tape over prelaminated cellulose board complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in bed block for hold fast, coping, benching on corner of joints etc complete all as specified and as directed.

Supply and fixing 100 mm size butt hinges medium weight cold rolled stainless steel complete all as specified and directed.

Supply and fixing Aluminium handles 'D' type anodised 150 mm long ISI marked complete all as specified and as directed.

Supply and fixing Aluminium handles 'D' type anodised 125 mm long ISI marked complete all as specified and directed.

Supply and fixing 150 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and as directed.

Supply and fixing 200 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and as directed.

Supply and fixing 300 mm long dia 16mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing blots and sliding bolts of extruded section complete all as specified and directed.

Supply and fixing 100 mm hasp and staple safety type aluminuium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing 2nd class hard wood small fittings such as brackets of any type, shaped door and windows stops and the like article not exceeding 200 cu.cm each and fixed complete all as specified and as directed.

Supply and fixing in repairs, mild steel enamelled helical door spring 150 mm (ISI Marked) size including roller and roller plate, fixed to wooden / steel frames by any means as required complete all as specified and as directed.

Supply and fixing galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple all as specified and as directed.

Supply and fixing 3mm thick sheet glass, ordinary quality glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Material and labour for preparing surface of new wood and wood based material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer on surfaces over 10cm width or girth complete all as specified and as directed.

Material and labour for preparing surface of new steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer on surfaces over 10cm width or girth complete all as specified and as directed.

Material and labour for preparing surface of old steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer on surfaces over 10cm width or girth complete all as specified and as directed.

Supply and fixing GI clip-in plain false ceiling system with tile (600mm x 600 mm) is manufactured out of 0.50mm. These tiles shall have square edges / bevelled edges. Two sides of each tile are raised and piped and stopped to ensure positive engagement into the spring clip in profile, yet allow for demounting of individual tiles. The rigid suspension system consist of rows of 0.50mm galvanized 100 to 120gsm /M² steel Clip-in-profiles of size 38mm x 20mm and installed at 600mm c/c spacing to support the tiles, clip-in profiles are suspended and jointed from galvanized steel 'C' channels of size 10mm x 38mm x 10mm with hold on clamps. Suspension Angles are suspended from the roof structure by GI ceiling Brackets and joint to the 'C' channels. The tiles are held in place by pressure clips. In the flexible system the Hanger and suspension clips replace the suspension angle. Wall angles or edge profiles are of size 24mm x 24mm and 0.4mm thick with the matching the color with tiles complete all as specified and as directed. Make: - ARMSTRONG, HUNTER, DOUGLES, DURLUM, PR CEILINGS

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate), floor surface complete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finished in CM 1:4 complete all as specified and as directed.

Material and labour for Non skid ceramic colour tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick, edgeless, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match shade, pattern, laying etc of tiles complete all as specified and as directed.

Material and labour 10 mm thick rendering in CM 1:3 on surfaces other than fair face of brick work even and fair faces to receive tiles complete all as specified and as directed.

Description same as per Ser Item No 56.00 here-in-before but as in skirting complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles (450 x 350 mm) x 7 mm thick as in verticle surfaces like dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite including taking down old one complete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick as in floor to match the shade of the slab including rubbing, polishing upto mirror finish complete all as specified and as directed.

Material and labour machine cut kota stone slab flooring 20-25 mm thick as in riser in step, skirting / dado to match the shade of the slab including rubbing and polishing upto mirror finish complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed.

Supply and fixing 15 mm bore unplasticised PVC pipes of pressure rating 10 kgf / cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

Supply and fixing 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf / cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

Dismantling water tanks capacity exceeding 500 and not exceeding 1000 litres complete all as specified and as directed.

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) five layers hoisted and fixed in position complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest and 'P' or 'S' trap and connection to flushing pipe, anti-syphonage pipe complete including provision of cement concrete bedding complete all specified in SSR part - I complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan pedestal pattern white including fixing bolts, including white coloured plastic seat cover, CP brass jet nozzle with 600 long PVC pipe complete fitting all as specified and directed.

Supply and fixing in repair vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, waste coupling cutting, waste pipe for and pinning in ends of brackets or erecting stand complete all as specified and directed.

Supply and fixing in repair PVC valveless, symphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply and fixing in repair low density PVC connections commercial quality 15mm bore with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repair low density PVC waste pipe 32 mm bore for flushing cistern complete all as specified and directed.

Supply and fixing in repair 15 mm bore bib taps long nose / long body, cast copper alloy CP fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 grams ferrule and fixed complete all as specified and directed.

Supply and fixing in repair 15 mm bore Angle valves, cast copper alloy CP fancy type, half turn, screwed down, high pressure, with crutch or butterfly handle, weight not less than 450 grams screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing in repair 15 mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure, with capstan head handle, weight not less than 450 grams screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing in repair 15mm dia CP pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repairs 15 mm dia Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specifed and directed.

Supply and fixing in repairs 20 mm dia Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specifed and directed.

Supply and fixing in repairs shower rose brass chromium plated with swivel joint of size 125 mm cast copper alloy CP fancy type with CP neck 9" long made to shape, weight not less than 350 grams complete all as specified and directed.

Taking up or down CI / PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints and removing lead of 100 / 75 mm dia pipe complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 75 mm bore pipe complete all as specified and directed.

Supply and fixing stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 100mm bore pipe complete all as specified and directed.

Supply and fixing in repair 75/100 mm Cast iron floor trap with stainless steel grating including jointing to waste pipe fixed in cement concrete type (1:2:4) type B-1 complete all as specified and directed.

Supply and fixing in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight - 210 gms) complete all as specified and directed.

Supply and fixing in repair brass CP towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Supply and fixing MS peg set of six powder coated as approved by GE complete all as specified and directed.

Supply and fixing in repair drapery curtain rod of metallic 20mm dia covered with PVC coating including MS bracket, end ball, rounded block (coated with brown / cherry / golden colour) of approved pattern and shade fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screws complete all as specified and directed.

Supply and fixing in repair Glass shelf rectangular size 450mm x 150mm, 5 mm thick glass with stainless steel bracket as per sample kept in GE office complete all as specified and directed.

Supply and fixing in repair cabinet mirror of PVC moulded size 600 x 450 mm as per sample kept in GE office complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plugs, washers and waste coupling, waste pipe, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm, bowl size 410mm x 330mm x 160 mm complete all as specified and directed.

Supply and fixing in repair plate rack stainless steel of size 600 x 900 mm made out of 1mm thick sheet fixed with washer and plugs and making good disturbed portion complete all as specified and directed.

Demolition of cement concrete of any description and in any position and removing the rubbish from work site complete all as specified and directed.

Material and labour for preparing surface of sunken slab and applying 15 mm thick cement plaster in CM 1:4 with liquid water proofing compound of an approved make @ 200 ml per 50 Kg of cement both on floor and wall finished surface even and smooth. The surface shall then be cured and filled with water for 48 hours and allowed to dry then apply APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap on primed surfaces by forced application as per manufacturer's instructions over one coat of industrial bituminuous 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of sunken floor / wall and applying a course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180° C and applied @ 1.2 kg/sqm over bitumen felt and sunken floor shall be filled with graded cinder concrete upto top level to receive to flooring complete all as specified and directed.

Material and labour for GI spout 25mm dia light grade, fixed to walls all as specified and as directed by Engineer-in-Charge.

Supply and fixing 0.63mm thick mild steel plain black sheet water troughs / eaves board, cut to size edges, fixed to steel members (welded) including bending, turning up, etc complete all as specified and directed.

Supply and fixing 0.56mm plain Aluminium sheeting Alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) as in crumple joint complete all as specified and directed.

Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc and removing the material retrieved to a distance not exceeding 500m where directed. (b) Material and labour for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminous primer conforming to IS:3384-1986 @0.25 litres / Sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (e) Material and labour for two coats of aluminium paint at the rate @ 0.1 litre / Sqm (each coat) on membrane surface complete all as specified and as directed.

Material and labour PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) for filling of hollow pressed steel frame complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Material and labour Hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for 100mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for 60 mm thick machine pressed precast concrete interlocking paver block (M-35 grade) any shape and size using grey cement and pigment confirming to IS-15658-2006 complete all as specified and directed.

Material and labour 50mm thick sand cushioning for machine pressed precast concrete interlocking paver block complete all as specified and as directed.

Demolition of concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour surface dressing not exceeding 15 cm deep in hard / dense soil and removal of surplus soil complete all as specified and as directed.

Material and labour excavating in post holes (or for similar work) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil complete all as specified and directed by Engineer-in-Charge.

Material and labour PCC (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete in foundation, concrete of posts complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of newly steel surfaces of any description by applying two coats of corrosion resistant paint over a coat of primer complete all as specified and directed.

Material and labour for excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard / dense soil complete all as specified and directed.

Material and labour for cement concrete (1:4:8) type D-2, (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Material and labour Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed.

Material and labour PCC (1:2:4) type B-2 (using 40mm graded crushed stone aggregate), 100 mm thick as in top layer of floor and finished rough to receive the floor toping complete all as specified and directed.

E/M Portion: - Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc complete all as specified and directed. Note: - Credit for above items should be made as per conditions separately.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and directed. Note: - Wiring shall be done in proper colour coding.

Material and labour for point wiring one light point or one fan point controlled by one switch complete with 1.50 Sqmm copper conductor multistranded PVC insulated FRLS and unsheathed cable in existing PVC rigid concealed conduit with new cast iron / pressed steel sunk terminal box covered with 3mm thick laminated sheet hylam brand IS-2036 marked with continuous PVC insulated multistranded copper wire 1.50 Sqmm dia FRLS PVC insulated complete all as specified and directed.

Description same as per Ser Item No 119.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board complete all as specified and as directed.

Description same as per Ser Item No 119.00 here-in-before but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and as directed.

Description same as per Ser Item No 119.00 here-in-before but for one light point controlled by two, 2 way switches, with cables 1.5 Sqmm complete all as specified and directed.

Description same as per Ser Item No 119.00 here-in-before but for one bell / buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sqmm size complete all as specified and as directed.

Description same as per Ser Item No 119.00 here-in-before but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20 / 25mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green color complete all as specified and as directed by Engineer-in-Charge complete with new CI / pressed steel sunken black with hylum top sheet cover.

Supply and fixing in repair socket outlet 5 Pin, 5A, flush type complete all as specified and as directed.

Supply and fixing in replacement for switch piano, flush type single pole one way 5 Amp, 240 Volts complete all as specified and directed.

Supply and fixing in repair modular switch two way 6 amps, 1 module complete all as specified and as directed.

Supply and fixing in repair bell push, flush type single pole, 5 Amps, 240 Volts complete all as specified and directed.

Supply and fixing in repair ceiling rose, 3 Phase / PVC / polycarbonate isolated body complete all as specified and directed.

Supply and fixing in repair switch piano, flush type single pole one way 15 Amp complete all as specified and as directed.

Supply and fixing in repair socket outlet 3, 5 pin and 15 Amp multipurpose shuttered type complete all as specified and directed.

Supply and fixing in replacement calling bell ding dong / buzzer AC 230 Volts, single pole complete all as specified and directed.

Supply and fixing in repair fan regulator stepped electronic type suitable for AC, 240 Volts complete all as specified and directed.

Material and labour in replacement for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Material and labour in replacement self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volts 6500K complete all as specified and directed.

Supply and fixing in replacement LED lights fittings 1 X 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen / Watt, 6500K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts, 50 Hz complete all as specified and directed.

Supply and fixing in repair LED light fittings 1 X 9 W / 1 X 10 W bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Taking down existing unserviceable ceiling fan, repair / maintenance including replacement unserviceable spare parts i.e. bearing, bush, PVC connector, PVC clamp, canopy, capacitor, including painting, rewinding of any make / type and size (1200 / 1400mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufacturer's specifications, including replacement of all insulation materials, varnishing, heating, drying, assembling of stator / rotor, connection and testing complete all as specified and as directed.

Taking down existing unserviceable exhuast fan, repair / maintenance including replacement unserviceable spare parts i.e. bearing, bush, PVC connector, PVC clamp, canopy, capacitor, including painting, rewinding of any make / type and size with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufacturer's specifications, including replacement of all insulation materials, varnishing, heating, drying, assembling of stator / rotor, connection and testing complete all as specified and as directed.

Supply and fixing in replacement of Vertical Distribution board (TP&N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and outgoing 12 No's MCB's and should be IP-43 protected with copper busbars, neutral links, earthing bar complete all as specified and as directed, including taking down old unserviceable distribution board / MCB any type. Note: - (i) Rates includes MCCB four pole 25 Amp, 16 KA, 415 Volts with adjustable thermal settings. (ii) Rate includes MCB SP 40 Amps, 12 No's, 10 KA. (iii) TPN DB, MCB and MCCB should be of same make.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Taking down existing serviceable / unserviceable electric meter along with existing angle iron steel box from the wall and refixing electric meter in position after repair, replacement of MCB TPN box including replacement of PVC flexible conduit for cable protection complete with making the existing wall neat and clean including patch work, plaster, brick work and white wash as per site requirement complete all as specified and as directed.

Material and labour for Earthing complete with galvanised mild steel earth plate electrode of size 600 X 600 X 6mm thick buried directly in ground earth vertically at a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.50 metre below ground level connected to galvanised iron or earth lead wire 4 mm dia (8 SWG) as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron earth plate electrode surrounded by a packed thickness of charcoal or choke dust mixed with common salt in alternate layers not exceeding 150mm thick, GI wire protected with and including galvanized iron pipe 20mm bore (dia) light grade, upto 1.0 metre above the floor level of the building where main switch / DB situated including PCC pit in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and precast RCC cover using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5m length for drawing earth lead wire protection, common salt, charcoal etc complete all as shown in electrical plate No. 3 of MES Schedule Part-I and testing on completion including taking down unserviceable earthing complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S A TO Z ENGINEERS

N S MANHAS

GENESIS INDIA

M/S LANGER CONSTRUCTION COMPANY

Bidder Name

N S MANHAS

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

GENESIS INDIA

M/S A TO Z ENGINEERS

M/S LANGER CONSTRUCTION COMPANY