Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 CrAccepted-Finance | ₹2.5 Cr | L1 | Accepted-Finance lowest1 |
| 2 | L2₹2.6 CrAccepted-Finance | ₹2.6 Cr | L2 | Accepted-Finance lowest2 |
| 3 | L3₹3.3 CrAccepted-Finance | ₹3.3 Cr | L3 | Accepted-Finance lowest3 |
| 4 | Rejected-Technical | - | - | Rejected-Technical NIT No. not mentioned on Affidavit |
| 5 | Rejected-Technical | - | - | Rejected-Technical Bid capacity and ongoing works contradictory Lacks work experience |
Tender Value
₹3.3 Cr
EMD Value
₹6.7 L
Closing Date
11 Feb 2026, 4:00 pmClosed
Executive Engineer
Peer bagh Srinagar near ACB Hqrs.
Construction of Model Rural Health Research Centre at New Type Primary Health (NTPHC) Khag Budgam. (Balance Work).
2026_DGPJK_301078_1
e-NIT/EE/PHC/34/2025-26
Open Tender
Civil Works
Khag Budgam
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
Executive Engineer
₹6.7 L
18 Feb 2026
21 Jan 2026
12 Feb 2026
22 Jan 2026
11 Feb 2026
22 Jan 2026
Earth work in Trench excavation by mechanical means Including dressing of sides and ramming of bottoms disposal lead upto 1 Mts.
Providing and laying of broken quarry stone solling (Hand Packed) in foundation trenches including ramming.
Providing and Laying of Cast-in-situ cement concrete M-7.5 Grade (40mm nominal size crushed stone agg.) upto plinth level, including curing but excluding cost of form work.
Providing and Laying of Cast-in-situ cement concrete M-20 Grade for RCC work (20mm nominal size crushed stone agg.) upto floor V level, including curing but excluding cost of form work.
Upto Plinth Level
Above Plinth Level Beams/Suspended Floors
Providing and Laying of Cast-in-situ cement concrete M-15 Grade (20mm nominal size crushed stone agg.) upto plinth level, including curing but excluding cost of form work.
Providing and Laying of High strength deformed steel bars Fe 415 G including cutting bending and fixing in position complete. (including cost of binding wire).
Centring and shuttering including strutting , propping etc. including removal of form work.
Foundations footings and bases of columns.
Suspended Floors
Beams/Lintels
Edges of Slab
Walls any Thickness
Columns
Disposal of malba/excavated material beyond muncipal limits of an average lead of 4 Kms.
Brick work with FPS bricks of class designation 75 in super structure up to all floors. excluding carraige of Bricks In cement mortar 1cement: 6 fine sand mortar.
Upto Plinth Level
Above Plinth upto floor V level.
Providing wood work in frames of doors,windows,clerestory windows and other frames, wrought framed and fixed in position with hold fasts lugs or dash fasteners of required dia and length(hold fast lugs shall be paid separatly) 2nd Class Kail wood/silver wood.
Providing and fixing mild steel hold fast
15mm cement plaster on rough / fair side of single or half Brick wall of 1:6 mix (1 cement : 6 course sand) including all carriages and cost of materials involved.
Providing and fixing ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.
Providing and fixing anti-skid ceramic glazed Floor tiles (300x300) conforming to IS:13753 of minimum thickness 5mm of approved make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.
Providing / laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including all carriages and costs of material involved.
Providing / laying 18-20mm th Granite Stone slab of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including all carriages and costs of material involved.
Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with oil bound water distemper in walls, ceillings etc two or more coats of approved brand and manufacture incl, with primimg coat of cement primer.
Finshing walls with exterior painting with of approved brand and manufacture to give an even shade incl, with priming coat of cement primer.
Providing and fixing of structural steel work in built up sections welded or bolted in trusses and like structures like angles, channels etc.
Providing & Fixing of 12mm thick imported wooden paneling/ lining (T&G) in soffits ceiling complete Job including all sorts of scaffoldings form work for an avg height of 25 from G/L imported panelling including finished with touch wood polish, cost of nails and screws including all carriages and cost by manually and manually complete job as directed by Engineer incharge at site.
Providing and fixing of (65x65)mm wooden cornices.
Providing and fixing of prelaminated colour coated steel roofing fixed with polymer coated J or L Hooks bolts and nuts 8mm dia with bitumin and limpet washers filled with lead as directed by the site engineer incl, all carriages and cost of material involved but excl, the cost of supporting structure (0.50mm th)(High Rib).
Providing and fixing of prelaminated colour coated steel ridge fixed with polymer coated J or L Hooks bolts and nuts 8mm dia with bitumin and limpet washers filled with lead as directed by the site engineer incl, all carriages and cost of material involved but excl, the cost of supporting structure (0.50mm th)(High Rib).
Providing and fixing of (300x40)mm nominal size 2nd class kail wooden Eaves Boarding.
Random Rubble massonary laid dry incl. all carriages and cost of material involved.
Providing and fixing of 35 mm thick Panelled / Glazed Door, window and ventilator shutters excluding cost of hinges and Glazing / Panelled Material but including labour for the same(Second class Kail Wood).
Providing and fixing of 35mm thick wire gauge shutters of imported 85 G (wire dia. 0.56mm, apperture size 0.84mm) wire gauge; complete but excluding cost of hings(Second class kail wood).
Providing and fixing of 3.5mm thick ordinary sheet glass pans, penelling Material to Window and Ventilator Shutters , embedded in putty and fixed with beads complete job.
Providing & Fixing panelling and glazing in panelled or glazed shutters for doors in place of pre laminated board ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured). (2nd class Kail Wood).
Providing and fixing of Hard ware goods to doors and windows.
Tower Bolts 4"
Tower Bolts 6"
Handles 4"
Handles 6"
Al-drop
Wind Hooks
Providing and fixing 12mm th ply wood for Ceilings incl, cost of necessary nailks etc complete.
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).including knifing grey paste filler of approved brand and manufacture.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats) on new work.. including all carriages and cost of material involved.
Providing / laying in position cement concrete flooring in 1:2:4 mix ( 1 cement:2 fine sand: 4 graded stone aggregate) 20mm nominal stone aggregate incl, finishing with a floating coat of neat cement excl, the cost of form work and carriage of material.
Providing & making moulding to No.ing of steps incl:rubbing,polishing and placing the colour strip between the layers complete job at site as directed.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T- Iron 40x40x6mm with 40mm dia steel pulleys complete with bolts,nuts,locking arrangement,stoppers,handles incl, applying a priming coat of approved steel primer.
Providing and fixing stainless steel ( Grade 304) railing made of hollow cubes channels , plates etc including welding grinding buffing polishing and making curvature and fitting the same with necessary stainless steel nuts all complete.
Providing and fixing stainless steel ( Grade 304) hand railing 50mm dia including welding grinding buffing polishing and making curvature and fitting the same with necessary stainless steel nuts all complete.
Providing and fixing stainless steel master piller etc including welding grinding buffing polishing and making curvature and fitting the same with necessary stainless steel nuts all complete.
Preparation of sub grade by excavating earth to an average of 22.5 Cm depth, dressing to camber and consolidation wioth road roller incl, making good the undulations etc. And disposal of surplus earth upto 50 meter.
Supply and Filling of GSB incl, spreading, levelling, dressing, Watering and consolidation with Power road roller incl, all carriages and cost of material involved.
Providing and fixing of following size of PVC (Prince make) Fitting ISI Marked.
100mm dia Door Tee
100mm dia Plain Bend
100mm dia Collar.
100mm dia P Trap.
100mm Plain Tee
100mm Door bend
75mm dia Door Bend
75mm dia Plain Bend
75mm Plain Tee
75mm Door Tee
75mm dia Collar.
75mm dia Floor Trap.
75mm Vent Cowl
100x75mm Reducer
Cliff
Providing and fixing of following size of PVC including C/O specified adhesive and gaskets .
100mm dia Pipes PVC
75mm dia Pipes PVC
50mm dia Pipes PVC
Providing and fixing of PPR hot and cold water pipes and fittings of approved quality incl, sockets, bends, elbows, etc all fittings complete job.
25mm dia Pipe
32mm dia Pipe
40mm dia Pipe
Providing and fixing of PPR Ball vale fittings of approved quality complete job.
25mm dia ball valve
32mm dia Ball Valve
40mm dia Ball Valve
Providing and fixing in position PVC water tanks with lockable cover incl. cost of carriage upto site of work.
Providing and fixing of (Europeon type) WC pan 530mm size white colour (Hindustan) excl. Cost of cement work and C.P long Bend incl cost of 10 litre low level PVC flushing cistern
Providing and fixing of (Indian type) WC pan 530mm size white colour (Hindustan) excl. Cost of cement work and C.P long Bend incl cost of 10 litre low level PVC flushing cistern
Providing and fixing CP Angle valve
Providing and fixing CP Central hole Basin Mixer
Providing and fixing CP Sink Mixer
Providing and fixing CP Wall Mixer Mixer
Providing and fixing CP 3 in 1 Wall Mixer Mixer.
Providing and fixing CP long body Bib Cock
Providing and fixing CP Short body Bib Cock
Providing and fixing of CP Grating with grating hinge type.(Standard make).
Providing and fixing 15mm dia 2''- 4" long CP nipples.(Standard make).
Providing and fixing PVC connection pipe 24" long.
Providing and fixing CP cup of (Standard make).
Construction of Brick masonry manholes using 2nd class bricks in 1:6 mix including plastering /PVC frame with cover, Complete Job of following sizes.18" x 18".
Providing and fixing of CP sink/ basin waiste coupling of standard make.
Providing and fixing of vitrous china wash basin with pedestal of standard make
Providing and fixing of PVC Waste pipe of approved make.
Providing and fixing CP Health Feucet
Providing and fixing Seat & Cover.
Providing and fixing in position 1 HP Water motor of Crompton make.
Providing and fixing of stainless steel sink of approved make.
Providing and Fixing of CP Jet shower of approved make
Providing and fixing of Looking Mirror of approved make.
Providing and Fixing of CP Towel Rod of approved make
Providing and Fixing of CP Soap Case of approved make.
Providing and Fixing of Closed water heater of standard make like Racold,Venus or like. 50 ltres capacity
Providing and fixing of 2’-0” deep Wardrobes/ Almirah of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 0.7mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job).
Making of plinth protection 50mm thick in 1:3:6 mix over 75mm bed of dry brick ballast incl, plastering the rough surface complete job incl, all carriages of material involved.
Supply, installation, testing & commissioning of MEDICAL Grade BS EN: 13348 Kite Marked COPPER PIPE (Indian
12mm X 1.00mm thk
15mm X 1.00mm thk
22mm X 1.00mm thk
28mm X 1.00mm thk
42mm X 1.2mm thk
Finshing walls with premium acrylic smooth painting approved brand and manufacture to give an even shade incl, with priming coat of cement primer on old work incl,sand papering incl, scaffolding upto 30meters.
Carriage of material from source to site by mechanical transport.
Stone aggeregate 40mm and down guage avg lead 10 km
Sand avg lead 10 km
Bricks avg lead 5 km
Electrical Part
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box etc. as required.
supply and fixing of 5 inch dia Fan Box / concealed box with round sheet cover for covering the base and bottom and dual painted with red oxide
Providing Installation testing and commissioning of Ceiling Fans of approved brands with connections etc as required
Supply & Fixing of additional Fan rod
Supplying and fixing two module Stepped type electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Supply,installation,testing and commissioning of Ceiling LED Surface Light 12 watt day milky fitting with connections as required
Supply & installation, of Conciel Box for LED Panel Lights as required
Supplying and fixing of 20 watt LED batten fiiting 2 feet long wall /surface mounted including connections etc as required
Supply & Installation of Exhaust Fans With Stylish Plastic Exhaust 200 mm(8") in the existing opening including connections,testing commissioning etc as required
Supply & Installation of Bulk Head Lights including connections,testing commissioning etc as required
Providing ,installation,testing and Commissioning of 100 watt LED Flood light with connection etc as required
Supply and fixing Indicator on the existing modular plate and switch box excluding as required
Supply and fixing of Ceiling rose on the existing junction box/wooden box including connections as required
Supply and fixing Modular Blanking Plate on the existing modular plate and switch box excluding modular plateas required
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2x1.5 sq. mm
2 x 2.5 Sqmm + 1 x 2.5 sqmm
2 x 4 Sqmm + 1 x 4 sqmm
2 x 6 Sqmm + 1 x 6 sqmm
2 x 10Sqmm + 1 x 6 sqmm earth wire
4 x 10Sqmm + 2 x 6 sqmm earth wire
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.& Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections for HEATING points etc. as required.
6 Module (200mmX75mm)
6 pin 15/16 A socket outlet & 15/16 A switch
5 pin 5/6 A socket outlet & 5/6 A switch
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.& Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections for HEATING points etc. as required.
3 Module (200mmX75mm)
6 pin 15/16 A socket outlet & 15/16 A switch
Supplying and fixing suitable size 12 module GI Box with modular plate & cover infront (combo)including providing 6 Amp socket / switch( 2 No) & 15 Amp socket / switch( 2 No) including connections etc. as reqd.
Supplying and fixing suitable size 8 module GI Box with modular plate & cover infront (combo)including providing 6 Amp socket ( 2 No) ,6 Amp switch ( 1 no) & 15 Amp socket / switch( 1 No) including connections etc. as reqd.
Supplying and fixing following 3 pin 5/6 A modular switch /socket on the existing modular plate & swich box including connections etc. as reqd.
Providing and fixing of 2 way AC Box with 16 Amp MCB mounting and connections etc as required.
Supplying laying & making outdoor connections & other jointing materials for 3.5X 240 sqmm LT Power Cable ,Almunium Conductor, ARMOURED
Supplying laying & making outdoor connections including aluminium lugs and other jointing materials for 3.5X 95 sqmm LT Power Cable ,Almunium Conductor, ARMOURED
Supplying laying & making outdoor connections including aluminium lugs and other jointing materials for 3.5X 50 sqmm LT Power Cable ,Almunium Conductor, ARMOURED
Supplying laying & making outdoor connections including aluminium lugs and other jointing materials for 3.5X 35 sqmm LT Power Cable ,Almunium Conductor, ARMOURED
Supply & Installation of Wall Fans including connections,testing commissioning etc as required
Supplying and fixing of following way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 way (4 + 18) double door
4 way (4+12) double door
Supply & Fixing following size TPN
63 amps TPN MCB
40 amps TPN MCB
Supply & Fixing following size DP MCB
Supply ,instalation,fabrication and commissioning of Low voltage Double Door Main Panel on 415 volts 3 phase 50 htzs of upto 2mm thick CRCA / Sheet of powder size 5x 6 x1.5 rft . a)Providing and fixing 400 amp TPN A1.Bus bar with required No. of thimbles etc (1 No.) b)300 amp TPN A1.Bus bar with required No. of thimbles etc (1 No.) c)400 amp 4 pole MCCB with 35 ka breaking capacity (1 No.) d)250 amp 4 pole change over switch e)250 amp 4 pole MCCB (04 No.) f) 160 amp 4 pole MCCB (04 No.) g)VSS meter/switch h) ASS meter/ switch
Supply ,instalation,fabrication and commissioning of Low voltage Sub Main Panel on 415 volts 3 phase 50 htzs of upto 2mm thick CRCA / Sheet of powder size 3'X4'x1' with a)Providing and fixing 300 amp TPN A1.Bus bar with required No. of thimbles etc (1 No.) b)Providing and fixing 200 amp TPN A1.Bus bar with required No. of thimbles etc (1 No.) c)250 amp 4 pole MCCB (01No.) d) 160 amp 4 pole MCCB (01No.) e)63 amp TPN MCB (6 No.) f)40 Amp TPN MCB (6No.) g)VSS meter/switch h) ASS meter/ switch i)32 Amp DP MCB (6 No.)
Supply ,instalation,fabrication and commissioning of Low voltage Sub Main Panel on 415 volts 3 phase 50 htzs of upto 2mm thick CRCA / Sheet of powder size 3'X4'x1' with a)Providing and fixing 300 amp TPN A1.Bus bar with required No. of thimbles etc (1 No.) b)Providing and fixing 200 amp TPN A1.Bus bar with required No. of thimbles etc (1 No.) c)250 amp 4 pole MCCB (01No.) d) 100 amp 4 pole Change Over switch (01No.) e)63 amp TPN MCB (6 No.) f)40 Amp TPN MCB (6No.) g)VSS meter/switch h) ASS meter/ switch i)32 Amp DP MCB (6 No.)
Supplying and fixing of 5 amps to 32 amps rating 240/415 volts "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Approved Brand.
S.I.T.C of Photo smoke detector.
S.I.T.C of Manual call box with hammer complete as req.
S.I.T.C of electronic hooter with audible range of 25-30mtr with suitable output wattage as req.
S.I.T.C of 2 x 1.5 sqmm FRLS copper conductor single core cable on the surface or in recess with medium class PVC conduit complete as required.
SITC of 4 zones solid-state main control panel suitable for wall mounting confirming to IS-2189 fabricated out of 16 guage CRCA sheet incorporating audio visual indication for each zones & 2x12V sealed dry maint. Free battery not less than 07AH capacity & battery charger complete.
SITC of 10 KVA 1 Ph192V online UPS with required no. of 150AH 12V batteries incl. stand/rack for the battery bank
Chemical Earthing complete
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.10 MB
BOQ_976833.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid