Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASAPURA CV RAMAN NAGAR PO BANGALORE 560 093 | BANGALORE | BANGALORE | KARNATAKA | 560093 | L1 | Accepted-AOC L1 | |
| 2 | L2₹39.2 L+₹62,550 (1.62%)Rejected-Finance NO 422 CHURCH STREET NEW THIPPASANDRA BANGALORE 560075 | BANGALORE | BANGALORE | KARNATAKA | 560075 | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹46.4 L+₹7.8 L (20.3%)Rejected-Finance 606 80 FEET ROAD 7TH BLOCK 2ND PHASE BANASHANKARI 3RD STAGE BANGALORE 560 085 | BANGALORE | BANGALORE | KARNATAKA | 560085 | L3 | Rejected-Finance Rejected being L3 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
9 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D EAST BANGALORE 93
GE I R AND D EAST BANGALORE 93
PROVISION OF CERTAIN MINOR AND REVENUE WORKS IN ADE AND DEBEL UNDER GE I R D EAST BANGALORE
2024_MES_641426_1
8458
Open Tender
Civil Works
Item Rate
120 days
GE I R AND D EAST BANGALORE 93
D a(i)
8 documents required · 8 mandatory
₹500
GE I R AND D EAST BANGALORE 93
₹88,000
30 Mar 2024
10 Feb 2024
18 Mar 2024
10 Feb 2024
9 Mar 2024
24 Feb 2024
10 Feb 2024 - 17 Feb 2024
Amount
Demolition of PCC of any description and in any position complete all as specified and as directed.
Material and labour for water proofing treatment to the sunken portion with following steps :- (i) Removing of exiting treatment including cleaning with wire brush. (ii) 15mm thick plaster in CM 1:3 mixed with and including WPC by weight of 3% of cement content along entire perimeter of sunken portion. (iii) Applying 02 coats of brush bond of FOSROC company or equivalent, second coat will be applied after complete drying of first coat or after 24 hours. (iv) Sunken floor kept ponded with water for minimum 48 hours. (v) One 450mm long 32 mm dia spout pipe of CPVC and to slop. NOTE :- BRUSH BOND must be applied as per manufacturer's instructions.
Material and labour for PCC 1:5:10, type E-2, using 40 mm graded crushed stone aggregate as in sunken slab filling etc.all as specified and as directed.
Material and labour for Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete all as specified and as directed.
Material and labour for Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and as directed.
Material and labour in repairs grating of 75 mm dia of PTMT, complete all as specified .[Minimum weight-25 gms] all as specified and as directed.
Material and labour for water closet squatting pan (Indian type W.C. pan size 580x440mm ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required all as specified and as directed.
Material and labour in repairs wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls, White Vitreous China, Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps all as specified and as directed.
Material and labour for Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification
Material and labour for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement in the frame at site as per specification.
Material and labour for 200mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.
Material and labour for 150mm long aluminium handle cast type anodised complete all as specified and as directed.
Material and labour for 75 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and as directed
Material and labour for steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and as directed..
Material and labour for 3.0 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 sq. m in each pane complete all as specified and as directed.
Material and labour for 75 mm dia PVC (SWR) pipes single socketed, type 'B' in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed
Material and labour for 75 mm dia PVC bends to any radius, type 'B' with and including for all necessary extra joints cuttings and waste complete all as specified and as directed.
Material and labour for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed
Material and labour for 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.
Material and labour for 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.
Material and labour for 15mm bore C.P. brass bib cock of approved quality all as specified.
Material and labour for Stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.
Material and labour for 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete all as specified and as directed.
Material and labour for PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms all as specified and as directed.
Material and labour for PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Material and labour for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete complete all as specified and as directed.
Material and labour for toilet paper holder with flat recessed type stainless steel fixed to wall complete all as specified and as directed.
Material and labour for 15 mm thick plaster in CM 1:4 on fair faces of walls , finishing the surfaces even and smooth w/o using extra cement complete all as specified and as directed.
Material and labour for preparing plastered or unplastered new surfaces of wall and applying three coats of white wash complete all as specified and as directed.
Material and labour for 110 mm bore PVC pipes type 'B' single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.
Material and labour for 110 mm bore PVC bends, type 'B' any radius complete all as specified and as directed.
Material and labour for plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and as directed.
Material and labour in repairs false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile, rotary stiched double webbed white with 6mm reveal profile (white/black), comprising of main - T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate crossT of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge
Material and labour for gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore all as specified and as directed.
Material and labour in repairs rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) of capacity 1000 ltrs complete all as specified and as directed.
Removing demolished material from defence land to a distance exc. 1.50 km but n exc. 5 km and depositing as per site arrangement of contractor complete all as specified and as directed.
Demolishing brick work in cement masonary manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
Material and labour for Pre-cast cement concrete block masonry with 1:1.5:3 solid blocks, exc. 10 cm in width and setting in mortar, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete all as specified and as directed.
Material and labour for 15 mm thick rendering in two layers on brick or block concrete masonry walls in cement mortar 1:4 with WPC incl finished even and smooth w/o using extra cement complete all as specified and as directed. NOTE :- WPC will be measured and paid separately.
Material and labour for mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufactures complete and as directed.
Material and labour for gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size of area less than 0.50 sqm. and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similarlocations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge
Dismantling tiles, wall tiles in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm.
Material and labour for 25 mm average thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished, including cement slurry, but excluding the cost of nosing of steps etc. complete all as specified & directed.
Material and labour for Double charged Glazed Vitrified tiles Matt / Anti skid finish of size 600mm X 600mm X 10 mm thick with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc complete all as specified and as directed.
All as per Sl Item No 45 above but as in skirting including 12 mm thick screed bed in CM 1:3 complete all as specified and as directed.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and as directed
Material and labour for 10 mm thick internal plaster in CM 1:6 on other than fair faces of walls , finishing the surfaces even and smooth w/o using extra cement complete all as specified and as directed
Material and labour for preparation of plastered or unplastered interior surface & distempering 02 coats with oil bound washable distemper of approved tint, brand and manufacture to give an even shade over and including water thinnable priming coat with cement primer all as specified and as directed by EIC.
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
Material and labour in repairs PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge.
Material and labour for 15 mm nominal dia pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing, this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
All as per Sl Item No. 53 above but of size of 20mm bore complete all as specified and as directed.
Material and labour in repairs C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore all as specified and as directed.
Material and labour for pressed steel door frames conforming to IS: 4351, Profile B Fixing with adjustable lugs with split end tail to each jamb manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge
Material and labour for 35 mm thick 2nd class hard wood factory made plain framed panelled, door shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by EIC.
Material and labour for aluminium tower bolts, 150mmx10mm dia ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed
Material and labour for 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed by EIC
Material and labour for aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete size 250x16 mm all as specified and as directed
Material and labour for preparation of old/new wooden surfaces painting with synthetic enamel paint of approved tint, brand and manufacture to give an even shade :Two or more coats on new work all as specified and as directed
Dismantling C.I. or asbestos / PVC rain water pipe 110 mm dia pipe with fittings and clamps including stacking the material within 50 metres lead and as directed
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter all as specified and as directed
Material and labour for wall face unplasticised - PVC shoe of 110mm for 110mm bore unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B-1, 30 mm thick using 20 mm graded stone aggregate as in flooring finished fair and even all as specified and as directed.
Material and labour for 12 mm thick rendering in two layers on brick or block concrete masonry walls in cement mortar 1:4 incl finished even and smooth w/o using extra cement all as specified and as directed.
Material and labour for preparing plastered or unplastered new surfaces of wall and applying two coat of white wash all as specified and as directed.
Material and labour for Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.
Material and labour for plain cement concrete (1:4:8) type D2 using 40 mm graded crushed stone aggregate as sub base flooring complete all as specified and as directed.
Material and labour for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. NOTE :- size to be confirmed by Engr-in-charge.
Material and labour for laying factory made chamfered edge 60mm thick M 35 grade Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. NOTE :- Size to be confirmed by Engineer in charge.
Material and labour for applying PUROOFKOAT, single component, cold applied, water based Polyurethane modified acrylic dispersion with highly elastic and UV resistance water proofing treatment to the roof @ 1.2Kg/m2 to confirm to ASTMD 6083-97 a with a density of 1.25 to 1.3Kg /ltr, having tensile strength of 1.5N/mm2, having elongation of 350% with solid content not less than 60% in 3 coats including self-priming of same material after dilution of water at 50% and spreading 60 gms Geo-textile between two top coats completely as per specification and direction of EIC.
Material and labour for PCC 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) for all works upto plinth level and as directed by EIC.
Material and labour for Wire netting of stainless steel wire 1.4mm dia size of mesh 12mm fixed with tinned tacks of stainless steel wire staple and all as specified and as directed by EIC
Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
Material and labour for Vitrified floor tiles of size 600mmX600mm (thickness should be specified by manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc complete all as specified and as directed
Material and labour for rendering with 15 mm thick CM 1:6 on brick or block masonry walls finishing the surfaces even and smooth w/o using extra cement complete all as specified and as directed
Material and labour for Multi faceted texture metalic finishes, royale play pastels special effects paints finishes, base coat as royal luxury emulsion, top coat royale play / royale play metalic special effects completely removing the existing finishes and applying two coat after 3mm thick(wall care putty of Birla Make or equivalent) complete all as specified and as directed.
Material and labour for french polishing on wooden surfaces hand rail including preparation of old wodden surfaces with two or more coats complete all as specified and as directed.
Material and labour for repairs in gypsum board 12mm thick in ceiling fixed with screw as per manufacturer instructions and as directed by EIC.
Material and labour for applying plaster of paris putty of 2 mm thickness over gypsum board surface ceiling to prepare the surface even and smooth all as specifed and as directed.
Material and labour for old / new surface and applying with one coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over a coat of primer in ceiling all as per manufacturer's specifications. NOTE :- Neccssary Scoffolding may be provided for application of paint over a height of exceeding 7.5mtr height complete all as specified and as directed.
Material and labour for two coats of oil bound distemper of approved tint including preparation of newly plastered or old and previously distempered surfaces of wall by complete removal of existing treated surfaces over and including a coat of priming paint to receive distemper over and including 2mm thick wall care putty with necessary sand papering to obtain smooth finish complete all as specified and directed.
Earth work in excavation in all kinds of soils by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all as specified and as directed
Material and labour for filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, complete as per drawing and direction of Engineer -in - charge.
Removing excavated material to a distance not exc. 1 KM and depositing where directed at a level not exc. 1.5 m above the starting point all directed.
Material and labour for filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete all as specified and as directed
Material and labour for laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm all as specified and as directed
Material and labour for laying in trenches for road/plinth and fixing along with pole / wall GI pipe 40 mm dia medium grade for protection of cable all as specified and as directed
Material and labour for cutting of black top cover of existing road up to 1 mtr depth and 60 cm wide for laying of UG cable and pipe line, refilling and making good after laying UG cable and pipe line with PCC 1:3:6 upto 30 cm from top of the road surface complete all as directed by EIC.
Material and labour for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 metres long) all as specified and as directed.
Material and labour for laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level all as specified and as directed.
Material and labour for laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)excluding the cost of centering and shuttering - All work up to plinth level all as specified and as directed
Supply and laying of LT under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100V, fixing to pole / in trenches / panel boards of size 10 Sqmm 2 core complete all as directed. NOTE :- Excavation earth work shall be meassured and paid for seperately
All as per Sl Item No.94 above but 10 sq.mm 4 core.
All as per Sl Item No.94 above but 50 sq.mm 3.5 core.
Material and labour for fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with 2.8 mtr long 40 mm dia light grade GI pipe bracket bent to a shape fixed on existing pole with FI clamps 40x6 mm including necessary nuts and bolts all as directed by Engr-In-Charge.
Material and labour for HDPE junction box with bus bar and 10 Amp MCB SPN and fixing on poles with MS Clamps and connecting with existing cable including painting to clamp all as specified and as directed
Material and labour for Cable PVC insulated multi stranded copper conductor 2.5 sq.mm ISI including taking out old unserviceable complete all as directed. NOTE :- Two runs of cable will be measured as one length.
Material and labour for Moulded Case Circuit Breaker 4 pole 25 KA breaking capacity 100 Amps capacity with thermal magnetic including addn/altn in exsting LT panel all as specified and as directed
Material and labour for Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable two run in concealed/surface / recessed, medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) One exhaust fan point controlled by one, one way switch 6 Amps
Material and labour for fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. all as specified and as directed.
Material and labour for fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and as directed
Material and labour for fixing exhaust fan, PVC body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and as directed
Making opening/drilling of suitable size dia, using heavy duty stone driller/cutter machine in the stone masonry wall for installing exhaust fan and louvers etc and making good the disturbed surface all as specified and as directed
Taking down carefully old U/S light fittings etc, removing all material for reuse/issued under sch of credit and making good the disturbed surface as the existing one all as specified and as directed
Material and labour for Recess mounted full panel LED luminaire 35/36 watt fitting 2’x2’ with white powder coated housing & frame in CRCA sheet, high efficiency LED grade diffuser, electronic driver duly wired upto terminal block, CRI>80, LED colour temperature – 5700k, IP20, 50000 burning hours as per L70 criteria, ambient temperature -0 to 50 Deg C, Driver efficiency >85%, THD<10%, PF>0.95, surge protection in CM-3KV, Multistage isolated constant current, constant voltage operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard.
Siddivinayaka Constructions
Lucky Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .