Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹25.0 L+₹68,818.38 (2.83%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹31.3 L
EMD Value
₹62,500
Closing Date
11 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
PROVN OF ONE BLOCK OF TOILET WITH BATHROOM WC 06 URINAL 02 AND BATHROOM 04 NEAR BLDG NO P 197 TROOPS LINE OF 572 DSC PLATOON AND CERTAIN MINOR WORKS AT TECH AREA TAKU UNDER GE BHOPAL
2023_MES_613296_1
8996/E8
Open Tender
Civil Works
Item Rate
183 days
ITARSI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹62,500
Yes
5 Dec 2023
11 Aug 2023
13 Sept 2023
11 Aug 2023
11 Sept 2023
25 Aug 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Excavating over areas, n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.
All as per item No. 1.00 here-in-before but for additional 1.5m or part thereof beyond the first 1.5m in depth.
Excavation in trenches, n.exc 1.50 m wide and n.exc 1.5 m deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
Use & waste for form work to sides of concrete foundation, footing bases of columns raft and similiar work vertical or to batter for rough finished flat surface complete all as specified and directed.
M&L for reinforced cement concrete type A1, 1:1.5:3 (using 20 mm graded stone aggregate) as in foundation, foundation beams; foundation beams; bases for columns, etc, basement slab and mass concrete complete all as specified and as directed.
Use & waste formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surface complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3, type A1 (using 20 mm graded stone aggregate) as in column, pillars, piers, posts and struts etc complete all as specified and directed.
Use & waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc for fair finished flat surfaces complete all as specified and directed.
S&F for mild steel TMT bars of grade Fe-500, 10 mm dia and over cut to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and includuing mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for mild steel TMT bars of grade Fe-500, 6 to 8 mm dia as in stirrup spacers and binders, hooking ends and binding with and includuing mild steel wire(annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3, type-A1 (using 20 mm graded stone aggregate ) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for dry clean moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exe 25 cm complete all as specified and directed.
Removing excavated material to a distance exe 50m but n exe 250 m and depositing complete all as specified and directed.
Use & waste for formwork to edges of concrete flats, treads, breaks in floors, window cill and roof not exceeding 200mm wide and sides of RCC/PCC band in walls horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished flat surfaces complete all as specified and directed.
Use & waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for fair finished flat surfaces complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3, type-A1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams roofs, landings, balconies complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, on edge walls (less than 1/2 brick thick) built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick on any face of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with mixing water proofing compound as per manufacturer instructions complete all as specified and directed. Note: Water proofing compound will be measured and paid seperately.
M&L for rendering 15 mm thick on any faces of brick work or concrete surfaces in cement moratr 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10 mm thick on concrete surface such as soffits of RCC, chajja, roof projection columns and beams etc in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.
Supply only intregal water proofing compound (ISI marked) complete all as specified and directed.
M&L for preparation of newly plastered surface of walls of any description and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of new surfaces of ceilings and applying three coats of white wash to ceiling complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as plinth protection finished even and smooth without using extra cement complete all as spciified and directed.
M&L for hard core of broken stone boulders of gauge n.exc 63mm, deposited, spread & levelled in layers n exc 15cm including watering and well rammed to a true surface thickness complete all as spciified and directed.
M&L for 75 mm thick cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base for receiving floor finish complete all as specified and directed
M&L for 25mm thick cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors etc; finishing the surface even and rough without using extra cement for receiving floor finish complete all as specified and directed.
M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick (square or rectangle) area of each tile exceeding 0.11 sqm but not exce 0.18 Sqm as in floors etc; set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for coloured glazed ceramic tiles of size 450x300x7mm thick on vertical surface of walls such as skirting, dado and risers to steps etc; set and jointed in neat cement slurry and pointed in colour cement to match the shade of tiles over and including 10 mm thick cement plaster in cement mortar 1:4 complete all as specified and directed.
S&F of vitreous china EWC 'P' or 'S' trap of size 400x365x540mm, white including white plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device suitable for EWC complete making good to floor and fixing bolts complete all as specified and directed.
S&F of vitreous china squatting pan Orissa pattern size 580 x440mm white with integral footrest including trap; set and making connection to trap, flushing pipe etc; including making good to floor complete all as specified and directed.
S&F of 10 litres capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washers both side of length 600mm complete all as specified and directed.
S&F of PVC connection of length 600mm with PTMT nuts of superior quality suitable for 15mm bore pipe complete all as specified and directed.
S&F of 15mm bore angle valve /stop valve brass chromium plated, fancy type, screwed down high pressure with capstan head, screwed both end for pipe or for unions complete all as specified and directed.
S&F of jet spray for EWC, brass chromium plated alongwith connecting pipe 15mm dia of min 1.2m length complete all as specified and directed
S&F of 15mm bore two way bib cock, brass chromium plated, fancy type with capstan head and wall flange complete all as specfied and directed
Cutting chases for concealed water tubing and similar work in brick walls and making good in cement mortar 1:3, cutting exceeding 10cm but n exc 20cm girth complete all as specified and directed.
S&F of GI tubing 15 mm dia, medium grade, galvanized with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F of GI tubing 20 mm dia, medium grade, galvanized with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F of GI tubing 25 mm dia, medium grade, galvanized with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F of 105x60mm size pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates,hinges, hold fast etc; size /profile of frame as per IS including one shop coat of red oxide primer complete all as specified and directed.
S&F of plain, framed, panelled shutters 30mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed.
S&F of aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed staple plate and fixed complete all as specified and directed.
S&F for steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and directed
S&F for steel ventilator with top hung shutter including hinges, steel pet stay complete all as specified and directed.
S&F of stainless steel mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S&F for 3 mm thick sheet frosted glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.
M&L for prepration of steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description over 10cm width or girth complete all as specified and directed.
S&F of solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS frame as per specification and drawings complete all as specified and directed.
S&F of 30mm thick factory made solid PVC moulded doors shutter with wood free EPS, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, suppling and fixing in frame at site as per specification and drawing complete all as specified and directed.
S&F for 100 mm size, butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.
S&F for 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F for 150mm size extruded aluminum alloy handles, fabricated type anodized (ISI marked) and fixed complete all as specified and as directed.
S&F of towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden /plastic plugs complete all as specified and directed.
S&F of soap dish, vitreous china white, approximate size 160x 160x90mm complete all as specified and directed.
S&F of shelf of PTMT not less than 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F of 15mm bore bib taps, brass, cromium plated, fancy type, long nose with capstan head screwed for iron pipe complete all as specified and directed.
S&F of 15mm dia pillar taps, cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair vitreous china urinal, half stall type, white including all fittings with CP grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:3, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement complete all as specified and directed.
S&F for urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed.
S&F of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with mild steel clamps complete all as specified and directed.
S&F of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F of 75mm bore PVC SWR bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
M&L of 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with mild steel clamps complete all as specified and directed.
S&F of 110mm bore PVC SWR bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F of 110mm bore PVC SWR branch piece, double (double Y) equal or unequal complete all as specified and directed.
S&F 110mm bore PVC SWR junction single, (single T) equal or unequal complete all as specified and directed.
M&L of PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.
S&F of moulded polythene water storage tank of 1000 ltrs capacity, hoisted and fixed in position with and including 15 mm dia float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F of PTMT shower roses with or without swivel joints, any size with shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour and fixing to steel pipe or union complete all as specified and directed.
S&F of concealed stop cock 15mm dia bore, brass chromium plated with long shank and cup (concealed type) and fixed complete all as specified and directed.
S&F of vitreous china wash hand basin, white, flat back of size 630x450 mm with peddestal, 32mm PVC waste pipe and CP coupling excluding tap but including brackets fixed to wall and nut and bolt over brackets complete all as specified and directed.
M&L of 15 mm thick screed bed in cement mortar 1:4, finsished even and smooth without using extra cement on roof surfaces using water proofing compound complete all as specified and directed. Note: WPC will be measured and paid separately.
Supply only liquid integral water proofing admixture for concrete and mortar complete all as specified and directed.
M&L for water proofing treatment with APP based standard membrane on roof with the following steps of treatment :- (a) Applying bituminous primer @ 0.40 Kg per sqm of the surface area including cleaning the complete surfaces. (b) Applying APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced (4 Kg/Sqm) with 10cm overlaps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instructions as directed.
Surface excavation n.exc 30cm deep and averaging 15 deep and getting out in hard/dense soil complete all as specified and directed.
Excavating in post holes (or similar holes) in hard/dense soil, each hole not exceeding 0.50cum and getting out, returning filling in and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.
S&F of mild steel work as in roof trusses, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, angle, channel, square holow section or flat sections) including distance pieces cleats etc complete all as specified and directed.
S&F of pre painted galvalume aluminium zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering bent to curve any radius and fixed with self tapping screws complete all as specified and directed.
S&F of pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /ridge, eve board etc; fixed with self tapping screws complete all as specified and directed.
M&L for 150mm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in floors and paving, laid in panels and finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on any faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 100mmm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in floors and paving, laid in panels, finished even and fair without using extra cement complete all as specified and directed.
M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 20 mm thick on stone masonry surfaces or surface other than fair face of brick-work or one side lathing in cement mortar 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for clean dry sand cushioning for laying interlocking tiles complete all as specified and directed.
M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, M-35 grade with grey cement and pigment complete all as specified and directed.
M&L for precast cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in kerb stone and similar work complete all as specified and directed.
S&F for gun metal globe or gate valves of 15mm bore class-2 with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.
S&F for gun metal globe or gate valves of 20mm bore class-2 with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.
M&L for cutting existing CI/GI main water supply line in position for insertion of special fittings/ ferrule, tee, bend etc. of suitable size for making branch connection including testing after completion complete all as specified and direced. Note: Excavation, returning, filling in and removal of soil included in quoted rates.
S&F of 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.
S&F of moulded polythene water storage tank of 500 ltr capacity, hoisted and fixed in position with and including 15 mm dia float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
M&L for rubber moulded pre polished lacquer finish chequered cement concrete tiles 300x300x25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors over screed be or bedding layer of mortar 20mm thick for laying floor finishes complete all as specified and directed.
M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.
M&L for brickwork with sub-class 'B' bricks in one brick thick honey comb walling, built in CM 1:3 complete all as specified and directed.
M&L for broken brick bats loose filling in soakage pits/filter beds etc complete all as specified and directed.
M&L for 100mm dia RCC pipes class NP-2 laid in trenches and jointed with cement mortar 1:2 and tested complete all as specified and directed.
M&L for 150mm dia RCC pipes class NP-2 laid in trenches and jointed with cement mortar 1:2 and tested complete all as specified and directed.
M&L for concrete bed to drain pipe including packing under hanching against the side of pipes, 100 mm bore, in cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) and testing of pipe complete all as specified and directed.
M&L for concrete bed to drain pipe including packing under hanching against the side of pipes, 150mm bore, in cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) and testing of pipe complete all as specified and directed.
M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, block for hold fast, bed block or similar work and finished the surface with existing and including form work complete all as specified and directed.
M&L for bricks laid in trenches flat with equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified and directed.
M&L for drilling and tapping existing CI/GI water mains for branch connection of internal dia 25/20/15mm including necessary clamps with accessories complete all as specified and directed.
S&F for gun metal globe or gate valves of 25mm bore class-2 with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.
M&L for light point wiring with PVC insulated unsheathed FRLS 1.5 Sqmm multi stranded copper conductor cable 1100 Volts grade and 1.5 Sqmm multi stranded copper conductor cable as continuous earth wire drawn in medium grade PVC conduit as concealed conduit not less than 19/20 mm dia with all fittings, shunk MS pressed steel terminal boxes of suitable size and depth and 1.6mm thick sheet duly painted with two coats of anti corrosive paint out side and aluminium paint inside, with top cover 2.8 mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc including cutting chases as required complete all as specified and directed.
All as per item No.116.00 here-in-before but with 2.5 sq mm copper conductor cable for 15 Amps independent switch socket combination.
S&F of switch piano flush button type, single pole, 5 Amps, 240 Volts and fixed complete all as specified and directed.
S&F of ceiling rose surface bakelite 3 terminals and fixed complete all as specified and directed.
S&F of exhaust fan metal body of 300mm sweep, high speed, single phase, 50 Hz energy efficient, 5 star rating, 230 Volts with fixing arrangements and making necessary connection upto ceilling rose complete all as specified and directed. Make: CG/ Bajaj/ Khaitan
S&F of lamp holder PVC/ polycarbonate insulated body with back plate for angle/batten fittings and fixed complete all as specified and directed.
S&F of LED bulb 9 watt BEE 5 star rating complete all as specified and directed. Make: Philips/ Bajaj / Wipro
S&F of new generation energy saving, wall mounted LED tube light batten fittings, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED 6K (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and directed.
S&F of 35W LED street light fitting for building security with aluminum body with PC cover, with LED life should be more than 50000 hrs, THD<10%, PF>0.95, system lumens > 4500 Lumens with all accessories internaly pre wired and including connecting up with twin core flexible copper conductor cable with bracket made out of GI tubing 20mm dia light grade up to 1.2 mtr length with suitable size complete all as specified and directed.
S&F of sheet metal enclosure MCB distribution board, 8 way, double door with IP-43 protection single phase 240 Volts, including suitable size copper bus bar and neutral link, fixed flush in wall including cutting chases to wall for fixing DB and making good disturbed wall/surfaces compllete all as specified and directed.
S&F of MCB single pole and neutral 240 volts of capacity 32 Amps complete all as specified and directed.
S&F of MCB Single Pole of cap 06 to 32Amp, 240 volts complete all as specified and directed.
Earthing with galvanised steel pipe electrode, 40 mm bore, medium grade, 2.5 meters length, burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.25 meter below ground level, connected to galvanised iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 2 of SSR Part-I 1991 connected to earthing main DB's/ Panels all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1 :3 :6) type C1 and CI pit cover with frame duly grouted in the PCC chamber. Charcol, salt including provision of earth lead protected by 15mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete all as specified and directed. Note:- On testing after completion of earthing if the desired earth resistance is not obtained earthning will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engr-in Charge.
S&F of 1100 volts grade heavy duty XLPE cable of size 16 Sqmm 2 core, in service connections suspended by insulating hangers not more that 1 meter apart including 4mm suspension wire passing through GI pipe with aluminium conductor stranded polyethylene insulated, conductor served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and directed.
M&L for GI pipe, light grade, of 40 mm with all fittings and fixed to wall, complete all as specified and directed.
M/s SHIVRATAN CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .