SITC of HVAC Work in the construction of Sub District Hospital Malsisar, Distt. Jhunjhunu.

Amount

NON BSR ITEM

AIR HANDLING UNITS FOR OT VRV SYSTEM

Supply,installation, testing and commissioning of factory fabricated Double Skinned DX Coil Air- handling unit fabricated out of extruded aluminium section with 0.8mm pre-plasticized /pre-coated Galvanised steel sheet outside & 0.8 mm polished GI sheet inside complete with supply blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, power control panel with necessary switchgears incoming & outgoing for VFD, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 row cooling coil made of Aluminium finned Copper tube, Copper header with coil section, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, (Hepa filters shall be at terminals along with laminar flow plenum & not to be included in the cost),. The capacity of Air-handlers shall be as follows:

3200 CFM (8.0 TR ) ESP - 120 mm

2400 CFM (6.0 TR ) ESP - 120 mm

Fresh & Exhaust air in line fan: - Supply, installation, testing and commissioning of Exhaust &fresh air inline fan.

400CFM (static pressure upto 20 mm)

800 CFM (static pressure upto 20 mm)

900 CFM (static pressure upto 20 mm)

1000 CFM (static pressure upto 20 mm)