PROVN OF CHAIN LINK FENCING WITH ANGLE IRON POST AND BARBED WIRE AT OFFICE COMPLEX OF ARO AND RCC PLATFORM AND OVERHEAD SHED FOR 01 X GENERATOR SET (125 KVA) AT GS BRANCHAT JUTOGH CANTT UNDER GE (I) JUTOGH

Amount

Excavation in post holes (or similar holes) each n. exc. 0.5 cum in hard/dense soil and getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:2:4, type B-2, using 40 mm graded crushed stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

S&F mild steel work as in hand rails half round or other stock section or core for wooden hand rail straight portion drilled and counter sunk for balusters running bars for doors, balusters, nosing to steps including embeding in concrete and screwing etc., wind ties for roof including securing bolts, post and strut in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. flat iron fillets securing wire mesh including all necessary drilling and bolting and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10cm long, dia of neck 5 to 10mm, complete all as specified and directed.

S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply only Chain link MS galvanisd fencing any size and type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standard rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

M&L for 15mm thick rendering on brick or concrete surface in cement mortar 1:6 and finished even & smooth without using extra cement complete all as specified and directed.

M&L for ornamental and intricate design framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing, framework of water tanks and similar work con-forming to Fe.290 Gde-E- 165, complete all as specified and directed.

Surface dressing n exc 15 Cm deep and getting out in sooft/ loose soil, complete all as specified and directed.

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out of any type of soil rock complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 250m but n.exc 500m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

M&L for 25mm thick, PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate finishing the surface even and smooth with using extra cement as in floor, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surface of wall in cement mortar 1:4, with water proofing compound as per manufacturer instructions and finish the surface even and smooth without using extra cement, complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and directed.

M&L for three coats white wash on new plastered surfaces of wall, including preparation of new surfaces, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed.

M&L for broken brick/ stone or boulders for hard core of gauge n. exc. 63mm deposited, spread and levelled in layer n. exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for mooram/ red bajri filling in floor or paving laid in layers not exc 15cm thick including spreading, levelling and watering complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, sub base or levelling course, complete all as specified and directed.

M&L for 100mm thick PCC (floors/hardstanding) 1:2:4, type B-1, using 20mm graded crushed stone aggregte laid in bays, finishing cement concrete surface even and smooth with using extra cement incl necessary formwork, complete all as specified and directed.

S&F structural steel work as in Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' complete all as specified and directed.

S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with 'L' or 'J' type hooks and washers in roofs with grade of Zinc coating 120 gm per sqm complete all as specified and directed.

S&F 0.63 mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 gm per sqm, bent to shape as required, fixed with J / L type hooks or self thread making steel screws of length noty less than 75mm, complete all as specified and directed.

S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lamp fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete drilled for fixing of steel sheeting etc of Fe 410 -W (Gde- E- 250) quality-A, complete all as specified and directed.

S&F mild steel as in Joist channel, angle, MS pipe or tee sections fixed independently, without conneting plates etc structural steel conforming to Fe-410w, Gde- E-250, quality-'A', complete all as specified and directed.

S&F expanded metal cut to length bent to shape n exc 4.0 kg/sqm required and tying with & including annealed Ms wire not less than 0.9mm dia or fixing with GI steel staple complete fixed to steel member, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, dia of neck 11 to 15mm, complete all as specified and directed.

S&F structural steel plates (plain or chequrred) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade FE-290W (Gde E 165), complete all as specified and as directed.

S&F 0.80mm thick mild steel plain, black sheet in hearths, covering to door shutters, covering to door chowkhats (frames), chullah hoods, water tanks, water troughs, ducts, urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams, including bending, turning up, mitred angles, stopped ends, outlets, etc. complete all as specified and directed.

M&L MS TMT bars, 5mm dia and over upto and incl 10mm dia as in stirrups, spacers, binders etc cut to shape requred, incl cranking spirally for hooping for columns, hooking ends binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces fair and even without using extra cement, complete all as specified and directed. Note:- The plinth protection shall be laid in pannels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate, as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work rough finished surface complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including over hang supports etc. also splays between floors and beams etc., complete all as specified and directed.

M&L for RCC 1:1.5:3, type A-1, nominal mix, using 20mm graded crushed stone aggregate as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, base floor, under-reamed piles and mass concrete foundation, complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with PVC concealed Conduit with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way complete all as specified and directed.

S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals, complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6sqmm, two core, nominal cross section in service connections, complete all as specified and directed.

S&F sheet metal enclosure, 2 way, without busbar fixing on surface complete all as specified and ditected.

S&F MCB SP 06 to 40 Amps 240V, 10 KA incl all termnials, fitting etc including taking down complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sqmm 3.5 core complete all as specified and directed.

M&L for earthing complete with copper earth plate 600x600x3.15 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to copper strip 20x3 mm as Earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe medium grade 40 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanized Iron/steel of size 75x75x 25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x6mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia round bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified and directed. Note: (i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead upto 7.5 mtr, char coal dust, common salt, porcelain insulator, PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate and watering pipe, earth lead protection pipe, test point, earth lead exceeding 7.5 mt are measured and paid separately.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

Supply, fixing or laying HDPE (DWC) tubing 100 mm dia of pressure rating 6Kgf/Cm2 fixing on poles, walls under floors, road crossing laying on surface , laying in trenches etc complete all as specified and directed. Note: The rates of required accessories, bend, joints, nut bolts, clamps etc deemed to be included in quoted rates . Earth work shall be mesured and paid separately under relevant items of BOQ.

S&F on load change over switch 415V, in sheet metal enclosures, 4 way of capacity 200 Amps, complete all as specified and directed.

M/S Meera Builders

NSK TRADER