REPAIR REPLACEMENT OF LT PANELS CONNECTION CABLES AND ALLIED WORKS IN THE AREA OF AGE U WS II OF GE U W S DELHI CANTT 10

Amount

Taking out existing LT UG cable laid in trenches/fixed to poles etc of following sizes :-Note : Earth work excavation will be measured and paid seperately under relevant items)

4 Core 10 Sqmm

4 Core 16 Sqmm

3.5 Core 25 Sqmm

3.5 Core 35 Sqmm

3.5 Core 50 Sqmm

3.5 Core 70 Sqmm

3.5 Core 95 Sqmm

3.5 core 120 sqmm

Relaying /relaying of existing LT UG cable laid in trenches/fixed to poles same after connected repair works cable of following sizes :-Note : Earth work excavation will be measured and paid seperately under relevant items)

4 Core 10 Sqmm

4 Core 16 Sqmm

3.5 Core 25 Sqmm

3.5 Core 35 Sqmm

3.5 Core 50 Sqmm

3.5 Core 70 Sqmm

3.5 Core 95 Sqmm

3.5 core 120 sqmm

Material and labour for XLPE insulated, screened, PVC bedded,galvanised steel strip or wire armoured,electric power cables (heavyduty) with aluminium conductor, 1100 volts, grade of following dia of cable laid in trenches/fixed to poles

4 Core 10 Sqmm

4 Core 16 Sqmm

3.5 Core 25 Sqmm

3.5 Core 35 Sqmm

3.5 Core 50 Sqmm

3.5 Core 70 Sqmm

3.5 Core 95 Sqmm

3.5 core 120 sqmm

Labour only for laying existing burnt bricks sub class 'B' old size laid in trenches with equal to length of bricks across the cable for cable protection complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 metre depth and getting out in hard/dense soil for taking out/laying cables complete all as specified and as directed.

Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard / dense soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Supply and spread clean dry river sand to required width at bottom and top for cable cushioning complete all as specified and as directed.

Material and Labour Burnt bricks sub class 'B' old size laid in trenches with equal to length of bricks across the cable for cable protection complete all as specified and as directed.

Repair/maintenance of juction box/pole box as per site including serviceable of bus bar,mcb & changing of cable or make it serviceable condition complete all as specified and as directed.

Supply and fixing in replacement of decorative gate light MASHROOM (PRISMATIC) including 20W LED lamp made up of high grade breakable polycarbonate material for retrofit complete all as specified and as directed.

Repair/maintenance of decorative gate light including changing of LED lamp,damaged light cover,cable, & MCB or make it serviceable as per site complete all as specified and as directed.

Supply and fixing in replacement of 20W surface/wall mounted 4 feet LED batten light with all fitting, extruded aluminium housing provided complete all as specified and as directed.

Material and labour for point wiring 1.5 Sqmm PVC insulated and unsheathed cable with copper conductor 1100 Volts grade, multistranded alongwith earth wire in existing surface / recessed steel / PVC conduits with PVC insulated copper wire including taking down worn out wires etc complete all as specified and as directed.

All as per srl item No-14- here-in-before but 2.5 Sqmm

Taking down old UNSV of any description type changeover switch and S&F Off-load changeover switches in sheet steel encloser 415V, 50 Hz 200Amps 4 Pole on existing pole/wall complete all as specified and as directed.

Taking down old UNSV any type changeover switch and S&F Off-load changeover switches in sheet steel encloser 415V, 50 Hz 250 Amps 4 Pole on existing pole/wall complete all as specified and as directed.

Taking down old UNSV of any description type changeover switch and S&F Off-load changeover switches in sheet steel encloser 415V, 50 Hz 315 Amps 4 Pole on existing pole/wall complete all as specified and as directed.

Taking down old UNSV any type changeover switch and S&F Off-load changeover switches in sheet steel encloser 415V, 50 Hz 400 Amps 4 Pole on existing pole/wall complete all as specified and as directed.

Taking down old UNSV any type changeover switch and S&F Off-load changeover switches in sheet steel encloser 415V, 50 Hz 600 Amps 4 Pole on existing pole/wall complete all as specified and as directed.

Taking down the unserviceable LED indicating lamps (panel mounting) and replacing with new LED indicating lamps complete including connecting and testing complete all as specified and as directed.

Taking down the unserviceable start button from existing panel and replacement with new start button complete all as specified and as directed.

Taking down the unserviceable terminal block any type and replacement with new one terminal block 100A - 3 way (For MU-G30/50) complete all as specified and as directed.

Taking down the unserviceable power contactor of any size and replacement with new power contactor ML 1.5 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactor of any size and replacement with new power contactor ML 2 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactor of any size and replacement with new power contactor ML 3 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactor of any size and replacement with new power contactor ML 4 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactor or any size and supply and fixing new power contactor MNX 18 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactor or any size and supply and fixing new power contactor MNX 32 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactor or any size and supply and fixing new power contactor MNX 40 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactoror any size and supply and fixing new power contactor MNX 70 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactor or any size and supply and fixing new power contactor MNX 80 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactor or any size and supply and fixing new power contactor MNX 95 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable power contactor or any size and supply and fixing new power contactor MNX 110 in existing starter panel complete all as specified and as directed.

Taking down the unserviceable FASD ML 1.5 (with MU relay) of any size and replacement with new FASD ML 1.5 (with MU relay) 25 HP including stainless steel box existing starter panel complete all as specified and as directed.

Taking down the unserviceable FASD ML 2 (with MU relay) of any size and replacement with new FASD ML 2 (with MU relay) 35 HP including stainless steel box existing starter panel complete all as specified and as directed.

Taking down the unserviceable FASD ML3 (with MU relay) of any size and replacement with new FASD ML3 (with MU relay) 50 HP including stainless steel box existing starter panel complete all as specified and as directed.

Taking down the unserviceable FASD ML 4 (with MU relay) any size and replacement with new FASD ML4 (with MU relay) 75 HP including stainless steel box existing starter panel complete all as specified and as directed.

Taking down the Direct on line starter for 7.5 Hp motor relay range 20-32 and replacement with new DOL starter 7.5 Hp relay range 20-32 in existing starter panel complete all as specified and as directed.

Taking down the Direct on line starter for 10 Hp motor relay range 20-32 replacement with new DOL starter 10 Hp relay range 20-32 in existing starter panel complete all as specified and as directed.

Taking down unsserviceable street light fitting 45W/60W any make and replacement with new driver/LED lamp existing suitable make and model make it funcional complete all as specified and as directed.

S&F in replacement of 70W LED street light made up of die cast aluminium housing with hight efficient LED as lightning source with toughened glass having IP66 protection and impact resistance of Ik 07 with inluding all fitting such as suitable cable/GI pipe bracket/MCB for fixing on wall complete all as specified and as directed.

Supply and laying earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as directed for 32x6mm galvanised iron strip

Material and labour for cable joint kit of size 4 core 16 sqmm for heat shrinkable straight through joint complete all as specified and as directed.

Material and labour for cable joint kit of size 4 core 25 sqmm for heat shrinkable straight through joint complete all as specified and as directed.

Material and labour for cable joint kit of size 3.5 core 35 sqmm for heat shrinkable straight through joint complete all as specified and as directed

Material and labour for cable joint kit of size 3.5 core 50 sqmm for heat shrinkable straight through joint complete all as specified and as directed.

Material and labour for cable joint kit of size 3.5 core 70 sqmm for heat shrinkable straight through joint complete all as specified and as directed.

Material and labour for cable joint kit of size 3.5 core 95 sqmm for heat shrinkable straight through joint complete all as specified and as directed.

Material and labour for cable joint kit of size 3.5 core 120 sqmm for heat shrinkable straight through joint complete all as specified and as directed

Material and labour for pin point the fault by arranging fault locating machine in any size of LT UG cable from any location/position/situtation, taking down/out the faulty portion of cable, of any length from trenches, jointing with cable jointing kit & testing for satisfactorily serviceable with & including necessary excavation and earth work, sand cushioning and making necessary connections to make it functional complete all as specified and as directed. Note :- (i) Cable jointing kit shall be measured and paid seperetely. (ii) Old retrieved bricks/cable cover shall be reused (iii) The rates quoted includes excavation & earth work with sand cushioning.

Direct mounting on ML 1.5 contractor Thermal over load relay, relay range 6-10 Amps suitable for fixing in existing panel complete all as specified and as directed

Direct mounting on ML 1.5 contractor Thermal over load relay, relay range 10-16 Amps suitable for fixing in existing panel.

Direct mounting on ML 2/3 contractor Thermal over load relay, relay range 9-14 Amps suitable for fixing in existing panel

Direct mounting on ML 2/3 contractor Thermal over load relay, relay range 13-21 Amps suitable for fixing in existing panel.

Direct mounting on ML2/3 contractor Thermal over load relay, relay range 20-32 Amps suitable for fixing in existing panel

Direct mounting on ML 2/3 contractor Thermal over load relay, relay range 28-42 Amps suitable for fixing in existing panel.

Supply & fixing LED bulb 9 Watt B 22 luman efficiency 90 Im/w,white cool day light complete all as specified and as directed

Material & labour for repair to existing earthing pit by dismentling unserviceable brick work after necessary excavation & earth work and construction of pit with new brick work using sub class B brick and plaster as required,replacing alternate layer of charcoal % salt as per electrical plate No-03 providing & connected earthing lead wire 4 mm dia of length as rerd by means of bolt,nuts and check nuts to make earthing funcional after testing complete all as specified and as directed.

Material and labour 1.5 Sqmm PVC insulated copper conductor, Two core cable in surface/ recessed as required complete all as specified and as directed

Material and labour 25 Sqmm PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and as directed

Material and labour 35 Sqmm PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed

M & L for mild steel work for repair/maintenace of LT panel including repair of panel cover/ms angle frame/hinges/PCC work for fixing panel properly and wlding works confirming Fe-290,Gde E-165 complete all as specified and as directed.

M&L for painting on steel and iron surfaces with two coat of synthetic enamel paint as per existing colour scheme or pattern after preparation of old painted surface of any description over 10cm in width or girth the frame should be with anticorrosive coating with seven tank process and finally epoxy ployster powder coating complete all as specified and as directed

Taking down the unserviceable electronic timer ST 100 and S&F new elecrtonic timer type ST 100 for fixing in panel complete all as specified and as directed

Supply, installing, testing and commissioning factory made and tested Indoor type Phase Sequence Corrector of capacity 7.5 to 15 Hp , 3 Phase 4 Wire, 415 volts, 50 Hz, wall mounted. The Phase Sequence Corrector shall be dust and vermin proof, protection class (IP-54) and made of 2.00 mm thick CRCA mild steel sheet, front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035.

The panel manufacturer should have following Govt. Approved Certificates: i) CPRI Certification Degree of Protection IP-54 ii) CPRI Certification Short Circuit withstand strenght should be 50 kA rms for 1.0 Sec with intial peak of 105kA iii) CPRI Certification Rated current for short circuit not less than 4000A with rated insulation voltage 660V iv) ISO 9001 CERTIFIED

Taking down the unserviceable single phase preventor VSP 2 from existing panel and replacement with new single phase preventor VSP 2 complete all as specified and directed

Taking down existing UNSV switch piano and Supply & fixing new Switch piano,flush type,single pole one way for 5 amps

Taking down existing UNSV switch piano 15 amp Supply and fixing new Switch piano,flush type,single pole one way for 15 amps

Taking down existing UNSV socket combination 5 amp and Supply & fixing new switch socket combination of rating 5 Amp flush type

Taking down existing UNSV 5 amp socket and Supply & fixing socket outlet 2 in 1,3 pin of rating 5 Amp.

Taking down existing UNSV 15 amp socket and Supply & fixing new socket outlet 2 in 1,3 pin of rating 15 Amp.

Supply and fixing in replacement MCCB 3 pole 415 volt adjustable type 63-100Amp with breaking capacity 25KA complete all as specified and directed

Supply and fixing in replacement MCCB 3 pole 415 volt adjustable type 125-160 Amp with breaking capacity 25KA complete all as specified and directed

Supply and fixing in replacement MCCB 4 pole 415 volt adjustable type 160-200 Amp with breaking capacity 25KA complete all as specified and directed

Supply and fixing in replacement MCCB 4 pole 415 volt adjustable type 200-250 Amp with breaking capacity 25KA complete all as specified and directed

Supply and fixing in replacement MCCB 4 pole 415 volt adjustable type 250-320 Amp with breaking capacity 36 KA complete all as specified and directed

Supply and fixing in replacement MCCB 4 pole 415 volt adjustable type 320-400 Amp with breaking capacity 50KA complete all as specified and directed

Supply and fixing in replacement of MCB single pole adjustable type 6 Amp capacity 15 KA complete all as specified and directed

Supply and fixing in replacement of MCB single pole adjustable type 10 Amp capacity 15 KA complete all as specified and directed

Supply and fixing in replacement of MCB single pole adjustable type 16 Amp capacity 15 KA complete all as specified and directed

Supply and fixing in replacement of MCB Double pole adjustable type 32 Amp capacity 15 KA complete all as specified and directed

Supply and fixing in replacement of MCB Double pole adjustable type 40Amp capacity 15 KA complete all as specified and directed

Supply and fixing in replacement of MCB Three pole adjustable type 50Amp capacity 10 KA complete all as specified and directed

Supply and fixing in replacement of MCB Three pole adjustable type 63Amp capacity 10 KA complete all as specified and directed

An amount of Rs 24440.00 shall be deducted from BOQ on account of schedule of credit

CHOUDHARY ELECTRICAL

Deven Associates

Tushar engineers

Surjit and Sons

ASHU ENTERPRISES

Microsys Controls India

Ridhi engineers and builders