REPAIR TO SUNKEN FLOOR DADO SOIL WASTE VENT AND WATER SUPPLY PIPES SANITARY FITTINGS PLUMBING INCLUDING OVER HEAD CLEANING AND REPAIR WOODEN ALUMINIUM STEEL JOINERY AND CONNECTED WORKS IN ZONE D AREA UNDER GE EAST MATHURA

Amount

Taking down cement plaster on brick or stone walls,concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L rendering 15mm thick on fair face of brick work/concrete in CM 1:4 and finishing surface even and fair by mixing liquid water proofing compound as per manufacturers instructions complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only water proofing liquid Dr Fixit or equivalent as approved complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces brick wall or concrete surface in cement mortar 1:6 finished even & fair without using extra cement complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 over 10 mm thick dubbing coat in cement mortar 1:4 on concrete surface as on ceiling, finished the surface even & smooth without using extra cement complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved by GE

Demolition of roof treatment including cement concrete/brick tiles, mud puska cement padding, plastering any thickness of treatment and removing complete debrise from site and dispose off out of MoD land complete all as specified and as directed.

M&L for 40 mm thick (avg) thickness cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing cement concrete surface, providing 10 mm thick modified plaster in cement mortar 1:4, cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement), applying primer coat of epoxy primer with resin and hardener with water dilution as per manufacturer's instructions, applying two coats of polyurethane liquid membrane each coat not less than 500 micron thick UV stable having SRI value equal or greater than 105 with consumption of 0.61 Kg/ Sqm (each coat), 2 nd coat should be applied once 1 st coat is fully dried complete all as specified and as directed. Note : Make of material is Asian paints or equivalent as approved by Engineer-in-charge.

M&L for cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement and no pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in cement mortar 1:4 and filling the joints with Tile Max premium cementitious grout material of JK Cement or its equivalent complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying three coats of white wash on wall complete all as specified and as directed.

M&L for preparation of new plastered surface of ceilling and applying three coats of white wash on ceiling surface complete all as specified and as directed.

M&L for prepration of newly plastered or unplastered surface of wall and applying two coat of distemper oil emulsion including over a coat of alklai resitant primer complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for cement concrete type E2 1:5:10 (using 40mm graded stone aggregate) as in foundations, filling (sunken floor) and mass-concrete complete all as specified and as directed.

M&L for 50 mm thick cement concret type B1 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement compete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compete all as specified and as directed.

M&L for 25 mm average thick cement concret type- B0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling course as in floor etc finishing cement concrete surface even and fair without using extra cement compete all as specified and as directed.

M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1 : 6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x 7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick cement plaster in cement motar 1:4 complete all as specified and as directed.

M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

All as per item serial No 25 here in before but as in skirting/dado laid over and including 10 mm thick rendering in cement motar 1:4. complete all as specified and as directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete, including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and as directed.

S&F in repair Vitrreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair one piece EWC 705x370x770mm 'S' trap 300 mm with soft close seat cover and then flush fittings fixed to floor complete all as specified and as directed. Make : Cera Christina Cat No. S1013119 or equavalant make out of make given list of make (Appx 'B').

S&F in repairs vitreous china wash hand basin, white, flat back, size 550x400mm including brackets, waste fittings, brass, chromium plated 32mm with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, including PVC waste pipe of 32mm bore 75cm long, complete all as specified and as directed.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as specified and as directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, twin flush fittings complete all as specified and as directed.

S&F in repair 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ cm2 fixed as waste pipe for WHB/Urinal etc complete all as specified and as directed.

S&F in repairs stop/angle valve cast copper alloy, chromium plated, fancy type screwed down, high pressure with crutch or butter fly handle ,screwed both ends for iron pipe or union 15 mm bore dia complete as specified and as directed.

S&F in repair Health faucet of superior quality ABS body with 8 mm dia 1.2 m long flexible tube and wall hook complete all as specified and as directed. Make : Jaquar Cat No ALD-573 or equivalent make out of make given in list of make (Appx 'B').

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) hoisted and fixed in position 500 liters capacity including connections and dismantling existing old u/s water storage tank complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) hoisted and fixed in position 750 liters capacity including connections and dismantling existing old u/s water storage tank complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) hoisted and fixed in position 1000 liters capacity including connections and dismantling existing old u/s water storage tank complete all as specified and as directed.

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for 20mm bore dia of pipe and fixed (minimum weight 210 gms each) complete as specified and as directed.

Cleaning of HDPE tank of capacity 1000 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing where directed complete all as specified and as directed.

S&F in repairs cover for HDPE water tank of capacity 500 & 1000 ltrs any type & make rotating type with frame including nut bolt complete all as specified and as directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for 20mm bore dia of pipe and fixed (minimum weight 210 gms each) complete as specified and as directed.

S&F Gun matel, globe or gate valves with iron wheel head, screwed both ends for iron pipe 20 mm bore dia and fixed all as specified and as directed.

S&F in repair bib taps cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipes15 mm bore dia complete all as specified and as directe.

S&F in repair bib cock 15 mm bore chromium plated Straight line model with wall flange complete all as specified and as directed. Make :Jaquar Cat No. SOL-6047 or equivalent as approved by GE.

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nut of length 600mm complete as specified and as directed.

S&F in repair wash basin mixer 15mm bore dia complete all as specified and as directed. Make : Cera Cat No F 2013461 or equivalent given in list of makes (Appx 'B).

S&F in repair Central Hose Basin Mixer 15mm bore dia without popup waste system with 450 mm long Braided Hoses complete all as specified and as directed. Make : Jaquar SOL-6167B or equavalant or equivalent given in list of makes (Appx 'B).

S&F in repair stop valve cast copper alloy fancy type cromium plated screwed down high pressure with crutch or butterfly handle scrwed both with ends for iron pipe or union and fixed 15 mm dia bore complete as specified and as directed.

S&F in repair stop valve cast copper alloy fancy type cromium plated screwed down high pressure with crutch or butterfly handle scrwed both with ends for iron pipe or union and fixed 15 mm dia bore complete as specified and as directed.

S&F in repair Angular cock 15mm bore dia with wall flange complete all as specified and as directed. Make : Jaquar Cat . No. SOL -6053 or of equivalent or equivalent given in list of makes (Appx 'B).

S&F in repair 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make : Cera Cat No F 1005401 or equivalent or equivalent given in list of makes (Appx 'B).

S&F in repair Wall Mixer 15mm bore dia with Telephone shower arrangement connecting legs and wall flanges but without crutch & telephone shower complete all as specified. Make :Jaquar Cat No. SOL-6217 or of equivalent or equivalent given in list of makes (Appx 'B).

S&F telephonic hand shower with hose pipe 1.5mm long (flexible tube chorome) fixed with wall mixture complete all as specified and directed. Make : Jaquar Cat No GRCL-3920 or its equivalent make given in list of make (Appx 'B').

S&F in repair for brass chromium plated tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flange complete all as specified and directed.

S&F in repair Towel Rail 20mm bore dia and 600 mm long complete all as specified and as directed. Make:Jaquar Cat No. -ACN1111NM or its equivalent or equivalent given in list of makes (Appx 'B).

S&F in repair PVC cabinet with mirror of size 350 mm x 450 mm, fixed to wall with screw complete all as specified and as directed. Make : Prayag Cat No 551 or its equivalent make Commander / Neelkamal / Polytuff

S&F in repair chromium plated over head shower 100mm dia with 200mm long arm complete all as specified and as directed. Make : Cera Cat No: F 7010213AB or its quivalent or equivalent given in list of makes (Appx 'B).

S&F Stainless steel plate rack, made of 1.00mm thick sheet for kitchen size 750x600 mm ,fixing to wall with stainless steel screw complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius complete as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with acess door complete as specified and as directed.

S&F 110 mm bore PVC (SWR), vent cowl complete as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore complete as specified and as directed.

S&F in repair PVC (SWR) floor trap plain 75mm dia of outlet with grating including jointing with solvent cement complete as specified and as directed.

S&F waste coupling of PTMT for 30mm bore discharge pipe (half or full threaded) (minimum weight 45gms) complete as specified and as directed.

S&F waste coupling of PTMT for 40mm bore discharge pipe (half or full threaded) (minimum weight 60gms) complete as specified and as directed.

S&F in repairs PVC flexible waste pipe 32 mm dia complete as specified and as directed.

S&F in repairs PVC flexible waste pipe 40mm dia complete as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps jambs,window cills, cooking platform and like laid over and including 15 mm thick screed in cement mortar 1:4 pointing in white cement using marbal dust with admixture of pigment to match the colour including rounded/ half rounded edge and hole for gas pipe in pre-cast slab complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness as in floor/wall or kitchen plateform etc laid with cement mortar including removal of debris out of MoD land complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete as specified and as directed.

S&F in repairs sinks made of stainless steel sheet 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and as directed.

S&F in repairs Stainless steel sink with draining board made out of 1.0 mm thick sheet for kitchen with plug washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe. Overall size 915mmx460mm bowl and size 410x330x160mm complete as specified and as directed.

S&F in repairs 15mm bore Nipple suitable for HDPE water tank minimum weight 38gms complete as specified and as directed.

S&F in repairs 20mm bore Nipple suitable for HDPE water tank minimum weight 45gms complete as specified and as directed.

Taking down chowkhat or frames with shutters without taking off shutters from frame area n.exc 1.50 Sqm each complete as specified and as directed..

Taking down chowkhat or frames with shutters without taking off shutters from frame area exc 1.5 sqm and n. exc 4 Sqm each complete as specified and as directed..

Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

S&F Pressed steel frame for doors of size 105 X 60 mm with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

S&F Pressed steel frame for doors of size 125 X 60 mm with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

M&L for cement concret 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and as directed.

S&F 30 mm thick, factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type, both face covered with decorative face veneer with lipping/frame to match on both sides complete all as specified and as directed.

S&F 30 mm thick factory made glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc ( without sash bars) edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc, size of member of shutters as specified in SSR Part-1 section 8.20 (a) complete as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face complete as specified and as directed.

S&Faluminium anodized barrel tower bolts 150 mm length of bolt fabricated type of extruded section and fixed complete all as specified and as directed.

S&F in repair aluminium anodized barrel tower bolts 150 mm length of bolt of extruded section and fixed complete all as specified and as directed.

S&F Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.

S&Fin repair Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250 mm long of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250 mm long of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete as specified and as directed.

S&F in repair 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue overall length of cover plate 150 mm, anodised with hard drawn steel spring fixed in floor complete as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue overall length of cover plate 150 mm, anodised with hard drawn steel spring fixed in floor complete as specified and as directed.

S&F 300 mm, mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 300 mm, mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F MS Framed work such as grills gratings, door and cooler stand, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded ccomplete all as specified and as directed.

All as per item serial No-107 here-in-before but without glazing bars complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

M&L for powder coated aluminium frame for doors, windows, ventilators ( minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified including power coating.

M&L for powder coated aluminium door shutters (thickness or powder coating shall not be less than 50 microns of approved colour) of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

M&L for powder coated aluminium window and ventilator shutters (powder coating shall not be less than 50 microns of approved colour) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in reapirs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F Aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F in repair Aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F 5 mm thick sheet glass, ordinary quality and glazing/ fixed to aluminium frame in square exc. 0.5 square metre in each pane etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing/ fixed in repairs to aluminium/ Steel/ wooden frame in square exc. 0.5 square metre in each pane complete as specified and as directed.

S&F 4mm thick frosted glass, ordinary quality and glazing/ fixed to aluminium frame in square exc. 0.5 square metre in each pane complete all as specified and as directed.

M&L Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete as specified and as directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/ screwed etc complete all as specified and as directed.

S& F in repairs 25mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces as in cup board shelves, shutters, kitchen cup boards etc. ccomplete all as specified and as directed.

M&L teak wood lipping, 6mm thick fixed with nails to 25mm thick block board or veneered particle board for external surfaces complete all as specified and as directed.

& F Continuous (piano) hinges mild steel, bright finish or electrogalvanised width of flaps 40 mm (when opened) complete all as specified and directed.

S&F 150mm stainless steel Tower bolt for kitchen cabinet shutters complete all as specified and as directed. Make - KAFF/ Godrej / Hettich/Harrison

S&F stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and as directed.Make - KAFF/ Godrej / Hettich/Harrison

S&F in repair Harrison rails, anodised aluminium alloy curtain rod 20 mm dia with fixing brackets including decorative stops, roller etc complete as specified and as directed.

M&L for prepration of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete as specified and as directed.

M/s Aditya Enterprises

shyam construction

M/S United Builders

mh enterprises

M/S A.K. ENGINEERS

BHARDWAJ CONSTRUCTIONS

JAGDISH PRASAD TOMAR