SPL REPAIR TO PERIMETER FENCING AROUND BLDG NO P-94 AND MT PARK AT UMROI MIL STATION UNDER GE UMROI

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in Natural ground, Concrete, brick work, masonry, etc and making good disturbed ground, complete all as specified and directed.

Dismantling of chain link fencing of any gauge & size exceeding 4kg/sqm, complete all as specified and directed.

Excavating in soft/loose soil for post holes (or similar holes) each not exc 0.5 cum, getting out including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate for foundation filling and mass concrete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, concrete all as specified and directed by Engineer-in-Charge.

Supply only mild steel Galvanised wire Chain link fencing qsuare mesh of any size or type, made out exc. 3.8mm dia wire, complete all as specified and directed.

Supply and fix mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including embeding in concrete and screwing etc and nosing to steps, complete all as specified and directed.

Material & labour for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fix 5 to 10 cm dia of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 5cm long complete all as specified and directed.

Material & Labour applying two coats of synthetic enamel paint over a coat of red oxide primer on new or previously untreated steel surface of girth exc 10cm width or girth complete all as specified and as directed.

Supply & Fix Galvanised, 2 strand, steel barbed wire, barbed with 2.24 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Schedule of Credit

M/s M.D. Syiem