REPAIR TO WATER DRAINS, SWT, FOOTPATH AND CERTAIN B/R WORKS AT AFS AMLA

Amount

Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed.

M&L for brick work with Fly ash bricks 75 kg/cmsq compressive strength old size, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item No 2 above but except brick complete all as specified and as directed. Note: All type of bricks retrieved from item No 1 will be used.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M & L for 10mm thick rendering in cement mortar 1:6 on fair faces of brick wall finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster, (10 mm thick backing coat in CM 1:6 and 5 mm thick in CM 1:4) on fair faces of brickwork or concrete surface complete all as specified and as directed. Note: - 1. Finishing layer mixed with water proofing compound @ 200ml per bag of cement or as manufacturer’s instruction. 2. WPC shall be measured and paid separately.

Supply only liquid Water Proofing Compound.

Demolition of cement concrete unreinforced of any description & any position and disposing of the rubbish materials in low laying areas of defence land all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C-2 using (40mm graded stone aggregate) as in plinth protection and similar places finished even & smooth without using extra cement marking 10mm wide joints at every 3m interval and every corner, filled with hot mix of bitumen complete all as directed.

M & L for 100mm thick PCC 1:2:4 type B-2 (40 mm graded aggregate), as in top/bottom of SWT to surfaces or making impressions of expanded metal, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5 clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M & L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in surface channel and drain, rounded and chamfered edges surface even and smooth complete all as specified and as directed.

M&L for hardcore of gauge exc 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled/rammed to a true surface compete all as specified and as directed

Excavation in tranches n exc. 1.5 m wide & n exc 1.5 m depth for foundation etc., and getting out soft/loose soil complete all as specified and as directed.

Returning filling and including spreading, leveling, watering and wall ramming in layers not exceeding 25cm thick all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at level not exc. 1.5 m above the starting point complete all as specified and as directed.

Labour only for taking out existing sand mixed with wooden saw dust from the embankment of firing range, screening through net then mixing the new saw dust in sand in the proportion of 1:1 then again forming embankment at original place of firing range by raising height including ramming/rolling/watering and finished to required size and shape etc not exceeding 1.5m high from the base complete all as specified and as directed. Note:- (a) The additional saw dust and sand shall be added to the taking down materials after screening to maintain proportion 1:1 (sand:saw dust) which are actually brought at site by Contractor, measured by department and paid seperately under below item no. 21 & 22. (b) The quoted rates also include for filling new sand bags and placing them in front of the firing range in the pre-existing manner. (c) After range filling the site should be cleaned and cleared off of all debris.

All as per Item No.18 above but height exceeding 1.5m height and upto 3m complete all as specified and as directed.

All as per Item No.18 above but height exceeding 3m height and upto 4.5m complete all as specified and as directed.

Supply only screened river fine sand free from clay, silt and another foreign materials as per sample approved complete all as specified and as directed. Note:- A sample of the sand used should be tested to ascertain the density, gradation. The testing charges shall be borne by the contractor.

Supply only wooden saw dust free from wood pieces and another foreign materials as per sample approved complete all as specified and as directed.

M&L for cleaning of rain water drain/culverts of any size, any type with completely removing silt,soil, mud sludge,vegetation growth etc from surface of drain channel etc and removing the waste out side from MoD land complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for precast RCC (1:2:4), type B1 (using 20 mm graded stone aggregate) as in cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and as directed.

S & F TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping ends and binding M/s wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

M&L for stone boulder pitching with random rubble including grouting with cement and sand mortar 1:6 complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as directed.

M&L for yellow/ Red colour pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

S R BUILDERS (BID ID -3339243)

GWALIOR TRADE LINK (BID ID -3347202)

RAJBAITHE CONSTRUCTION COMPANY (BID ID -3338394)

VIJ ASSOCIATES (BID ID -3343649)

M/s SHAKTI INFRASTRUCTURE (BID ID -3337574)