CERTAIN REPAIRS TO BLDGS IN GE, ENT, GYNOCARE WARDS, ALSC, ORTHO, UROLOGY, CARDIOLOGY DEPTT AND OTHER MD AND OTM ACCN AT BASE HOSP UNDER GE E/M BASE HOSPITAL DELHI CANTT-10

Amount

Dismantling brick tiles or terracing tiles, single layer on roof laid over mud phuska and pointing with cement mortar complete all as specified and as directed.

Demolition of Mud in roofs, any thickness, including PCC/plastering and leeping complete and disposal of all debris exc 250Mtr not exc 500 Mtr and complete all as specified and as directed.

M&L for providing plain cement concrete, type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in roof padding, Gola, etc including cleaning the surface by wire brushing complete all as specified and as directed.

M&L for 20 mm thick rendering on concrete surface of roof with cement mortar 1:4 finished even and fair including mixing of water proofing compound as per manufacturers instruction complete all as specified and as directed. (Note: Water proofing compound shall be measured and paid separately)

Supply only water proofing compound (powder) complete all as specified and as directed.

M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps etc as per manufacturers instruction. (Make:- IWL India Ltd/ STP Ltd/ Torch Tar Membrane)

Demolition of brick work built in cement mortar of any description and including disposal of all debris and complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in filling of sunken floors of WC, Taking down existing damaged vitreous China squatting pan, taking down existing water proofing treatment of any description from sides and bottom of sunken floors, roughening surfaces of old concrete surface by picking, sweeping clean and washing down with water to remove dust, etc and carrying out the following:- (a) Supply and fixing 25 mm bore, galvanized steel tubing, medium grade, 450 mm long as in spout of sunken floor. (b) Rendering, 15 mm thick screed bed or bedding layer of cement mortar (1:2), mixed with Pidiproof LW + @ 0.30 ltr bag of cement as per manufactures instructions on fair faces of brick wall or concrete surfaces of sides and bottom of sunken floor and finishing surface even and smooth without using extra cement. (c) providing waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 kg/Sq M, applying hot applied bitumen VG-10 @ 1.20 Kg/Sq M, providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00 mm thick, weighing 3.50 Kg/Sq M with surface finish of white mineral, by torch on application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction on sides and bottom of sunken floor. Note:- Approx size of sunken floors in WC, 2.50 Sqm and 450 mm (D). (d) M&L for providing PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in mass concrete in sunken floor.

Demolition of stone slabs laid bedded and pointed in any mortar and cladding tiles of any description or thickness in floors, aprons, walls, etc and removing the debris off MOD land complete all as specified and as directed.

M&L 20 to 25 mm thick machine cut kota stone flooring laid over and including screed bed or bedding layer mortar 15mm thick in cement mortar 1:4 for laying floor finished jointed and pointed with grey cement slurry mixed with pigments to match the sheds incl all grade rubbing and polishing upto mirror (polishing) image complete all as specified and as directed.

M&L for Machine cut kota stone 10 to 12 mm thick but on skirting/dado including & over 10 mm thick rendering coat in cement mortar 1:3 complete all as specified and as directed.

M&L for 18 to 20 mm thick of approved shade granite stone (Zed Black) (superior Quality) slab (table rubbed and polished as in floors, jambs, steps, cooking platform, etc and the like, over & incl 15 mm thick screed in CM 1:4 incl pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including two strip of line make of (stread of stair case) granite complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and including disposal of all debris exc 1.5 KMtr not exc 5 Km and complete all as specified and as directed.

M&L for Non skid ceramic tiles7mm to 8mm thick Ist quality ceramic coloured of area exc 0.11 Sqm but nexc 0.18 Sqm (400x400mm) in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with tiles laid on 15mm thick cement screed (1:4). all as specified and as directed.

M&L for Coloured glazed ceramic tiles of 400 x 300 x 7mm thick and 600 x300mm size 7mm thick in vertical surfaces (including designed borders) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in cement mortar (1:4) complete all as specified and as directed. Note:- (Rate of Designer border in vertical surface shall deemed to be included in quoted rates)

Taking down chowkhat or frames (without taking off shutter from the frame) not exc 1.50 sqm each complete all as specified and as directed.

All as per item No. 18 here-in-before but exc 1.50 sqm but not exc 4.00 sqm complete all as specified and as directed.

M&L for Framed work as in doors, Chowkhats or gates of angle or other section with gusset plates, rails, braces, and hold fast etc., complete all as specified and as directed. (Fe 290 gde E 165)

S&F solid PVC moulded door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and as directed.

S&F Factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing incl 3 Nos 100mm PTMT Hinge, 2 Nos 150 mm PTMT Tower bolt and 2 Nos 150 mm PTMT handle complete all as specified and as directed.

S & F flush shutters 32 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete al as specified and as directed.

M&L for IInd class Hardwood 32 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F Steel windows glazed and gauzed shutters, stainless steel wiremesh, box type hinges with steel handle, steel peg set and including framed work such as grills, guard bars etc. for pressed steel windows incl powder coating to match the windows, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; and similar work conforming to Fe.290. Gde-E-165 etc including taking down old window complete all as specified and as directed.

S&F 18/19mm thick PVC moulded solid board one side prelam for Cup Board shutter including taking down of old board with self and shutter full size fitted under/ above the kitchen cooking platform and other platform as per drg incl provision of fixing arrangement /fixing & fixtures (magnetic catches, piano hinges and knob etc) complete all as specified and as directed. Make: Rajshree/ Sintex

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples or powder coated aluminium beading complete all as specified and as directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F 300mm long mild steel sliding door bolt, stove enamelled black with bright belt not less than 12mm dia with and incl a minimum of 6 belts and nuts four on belt plate and two on stapple plate complete all as specified and as directed.

S&F 200mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm long Aluminium handles, cast type anodised complete all as specified and as directed.

S&F 100mm long stainless stell butt hinges complete all as specified and as directed.

S&F 140mm long floor door stopper of Aluminium alloy body and tongue, anodised with hand drawn steel spring fixed in floor.

M&L for PCC 1:2:4 type B1 using (20mm grade stone aggregate) for inserting hold fast, similar work and making good of surfaces.

S&F in repair CP bib cock in Fancy type long body 15mm dia complete all as specified and as directed.

S & F in repairs CP pillar cock fancy type of 15 mm dia complete all as specified and as directed.

S&F in repair 15 mm dia Stop valves/angle cock, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in replacement 15mm, 2 in-1 CP angle cock with flange) complete all as specified and as directed.

S&F in repair 15 mm dia chromium plated shower rose min 80 mm size complete all as specified and as directed.

S&F in repair CP wall mixer hot and cold with telephonic shower complete screwed down and connected to 15mm bore iron pipe complete all as specified and as directed.

S&F in repair CP wall mixer hot and cold without shower complete screwed down and connecting to 15mm bore iron pipe complete all as specified and as directed.

S&F in repair CP basin mixer Hot and cold screwed down and connecting to 15mm bore iron pipe complete all as specified and as directed.

S&F in repair tubular towel rail, 20mm dia D-type, 60cm long between flanges of chromium plated fixed complete all as specified and as directed.

S&F in repairs chromium plated15 mm dia Health Faucet with 1.5 mtr tube & hook complete all as specified and as directed.

S&F in replacement sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to pipe, overall size 915 X 460 mm bowl size 410 mm X 330 mm X 160 mm incl PVC waste pipe complete all as specified and as directed.

S&F in repairs 15mm dia chromium plated jet spray (Butterfly) for EWC including 1.50 mtr flexible tube complete all as specified and as directed.

S&F in repairs 15mm dia single lever CP elbow action surgical purpose wall mixer complete all as specified and as directed.

S&F in repair CP 15mm dia single lever surgical purpose elbow action basin mixture with extended operating lever system with 450mm long braided Hoses complete all as specified and as directed.

S&F in replacement 2 way PVC angle cock 15mm (with flange) complete all as specified and as directed.

S & F in repair 15 mm dia Pillar taps of PTMT any colour screwed for iron pipe (minimum weight 120 gms) complete all as specified and as directed.

S & F in repair 15 mm dia Bib taps fancy type of PTMT any colour screwed for iron pipe (minimum weight 105 gms) complete all as specified and as directed.

All as per srl item No 51 here-in-before but long body 15mm of weight 120mm gms complete all as specified and as directed.

S & F in repair 15 mm dia Stop valves/Angle Valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and as directed.

S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F in repair plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repair soft close water closet seat cover, white colour complete all as specified and as directed.

S&F in repair PVC shelf corner boxed type two tier (300x300 mm size) assembly consisted chromium plated bracket guard and railing fixed with CP screws complete all as specified.

S&F in repairs PVC syphon set with handle and float valve complete for low level flushing cistern complete all as specified and as directed.

S&F in repairs PVC handle for PVC low level flushing cistern complete all as specified and as directed.

S&F in repairs ball valve of PVC for low level flushing cistern complete all as specified and as directed.

S&F in repairs PVC waste couplings for WHB with complete fitting etc 32 mm dia-45 Gms complete all as specified and as directed.

S&F in repairs PVC waste couplings for WHB/Sink with complete fitting etc 40 mm dia-60 Gms complete all as specified and as directed.

S&F in repair PVC connection 15mm dia, 600mm long with PTMT nuts on both ends complete all as specified and as directed.

S&F in repairs 15 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair stainless steel Grating 125mm dia round with or with out hole and fixed on floor/Nahani trap with white cement complete all as specified and as directed.

S&F in repairs soap dish stainless steel of size 75mmX100mm complete all as specified and as directed.

S&F in repairs Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe) but including waste pipe complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white (squatting pan & trap including connection to drain (or out going pipe and to flushing pipe anti syphonic pipe etc complete all as specified and as directed.

S & F in repairs Vitreous China one piece EWC concealed 705x370x770mm wash down water closet pan pedestal pattern white including fixing bolts but including jointing to soft close seat cover and twin flush fitting etc complete with P or S trap all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,15mm angular stop cock, 32 mm waste fittings, PVC connections as per reqd size, brass chromium plated for glazed ware sinks, basins etc including 15 mm bore CP fancy type piller tap with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and as directed.

S&F in repair vitreous China squatting pan, "Orissa" pattern size 580 X 440 mm, white, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and complete. (Make: Hindware /Parryware /Cera /Commander)

S & F in repairs 10 ltrs capacity PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete all as specified and as directed.

Taking up or down 15 mm bore steel water tubing and connections including removal from site complete all as specified and as directed.

S&F 15mm bore CPVC SDR -13.5 including all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and as directed.

Taking up or down 20 mm bore steel water tubing and connections including removal from site complete all as specified and as directed.

S&F 20 mm bore CPVC SDR -13.5 including all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and as directed.

Excavating in trenches not exc 1.5m wide and not exc 1.5 m in depth for foundations of walls and not exc 10 Sqm on plan in soft soil complete all as specified and as directed.

Returning filling in soil incl levelling, watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Removing excavated soil including disposal of all debris exc 1.5 KM not exc 5 Km outside of MOD land complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed stoneware) set in cement mortar complete all as specified and as directed.

S&F salt glazed stone ware drain pipes laid in trenches and jointed internal dia of pipe 150 mm grade 'A' complete all as specified and as directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and haunching against the sides of pipes after they are laid and tested in bores of pipe 150 mm dia complete all as specified and as directed.

S&F salt glazed stone ware drain pipes laid in trenches and jointed internal dia of pipe 200 mm grade 'A' complete all as specified and as directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and haunching against the sides of pipes after they are laid and tested in bores of pipe 200 mm dia complete all as specified and as directed.

S&F salt glazed stone ware drain pipes laid in trenches and jointed internal dia of pipe 300 mm grade 'A' complete all as specified and as directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and haunching against the sides of pipes after they are laid and tested in bores of pipe 300 mm dia complete all as specified and as directed.

Cutting into existing manholes for connecting new mains pipe making good to pipes rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required, internal dia of pipe 150 mm dia complete all as specified and as directed.

Dismantling PVC pipe joints in cement and taking out in trenches in for or wall of internal dia 110MM/75MM all fittings heads, shoes, bends, swan necks etc including cleaning for refixing or removal from site complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor or trenches 110 mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor or trenches 75 mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110 mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 75 mm bore pipe complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) reducer complete all as specified and as directed.

S&F in repair PVC 110mm (SWR) bends complete all as specified and as directed.

S&F in repair PVC 75mm (SWR) bends complete all as specified and as directed.

S&F in repair PVC110mm (SWR) junction single (single T equal or unequal) complete all as specified and as directed.

S&F in repair PVC 75mm (SWR) junction single (single T equal or unequal) complete all as specified and as directed.

S&F 100 mm dia sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls with stack clamps or laid in floors incl taking down old pipe complete all as specified and as directed.

S&F 75 mm dia sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls with stack clamps or laid in trenches or in floors including taking down old pipe complete all as specified and as directed.

S&F in repair 75 mm dia cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F in repair 75 mm dia cast iron pipes branch pieces, single (equal or unequal) Tee, sockets, etc with oval access door if required and fitted with stack clamps, etc complete all as specified and as directed.

S&F in repair 100 mm dia cast iron floor trap including jointing, etc complete all as specified and as directed.

S&F in repair 100 mm dia cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F in repair 100 mm dia cast iron pipes branch pieces, single (equal or unequal) Tee, sockets, etc with oval access door if required and fitted with stack clamps, etc complete all as specified and as directed.

Demolition of reinforcement cement concrete in ground floor and paving n exec 15cm thickness and any thickness below or above ground level disposal of all debris complete all as specified and as directed.

M&L Reinforced cement concrete nominal mix 1:1.5:3 Type A1 using 20mm graded stone aggregate as in chajjas including form work etc complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately.

M&L reinforced cement concrete nominal mix 1:1.5:3 Type A1 using 20mm graded stone aggregate as in foundation / footing, plinth, lintle, roof beams, bases for column including form work etc complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately.

M&L Mild steel TMT bars 6mm to 8mm dia and over, cut to length bent to shape required including cranking bending, spirally for hooping for columns and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. any description including disposal of all debris and complete all as specified and as directed.

M&L rendering 15mm thick in Cement Mortar 1:4 on brick surfaces of walls finished the surface fair and even without using extra cement complete all as specified and as directed.

M&L 10mm thick cement plastering on ceiling surfaces and finished the surfaces even and smooth without using extra cement in cement mortar 1:3 complete all as specified and as directed.

M&L rendering 15mm thick in Cement Mortar 1:6 on brick or concrete, surfaces of walls finished the surface fair and even without using extra cement complete all as specified and as directed.

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4(1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2(1 cement 1/2 coarse sand:2 colour marble stone chipping 10mm nominal size)including of using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed.

Forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed.

M&L for two coat of oil bound distemper including preparation of new ceiling surface and priming plastered and other surfaces with primer paint over 3 to 5mm thick wall care putty complete all as specified and as directed.

M & L preparation of new surfaces of walls plastered or unplastered and applying two coats of cement base paint over a coat of primer to walls to obtain uniform surfaces including making good the surface complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying 3 mm thick wall care putty and applying two coats of Oil Bound Distemper over a coat of chalk whiting complete all as specified.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surfaces width or girth exc 10cm including preparation of surfaces complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10cm including preparation of surfaces complete all as specified and as directed.

M&L for Providing precast cement concrete louvers and jallies type B-0, 1:2:4 using 12.5 mm graded stone aggregate and set in cement mortar 1:6, 35mm thick (measured solid), including all mouldings but excluding frame and applying two coats of white wash including taking down of old existing jallies complete all as specified and as directed.

S&F in replacement factory made precast reinforced cement concrete manhole cover(RCC 1:2:4, using 20 mm graded stone aggregate) 100 mm thick (Square/rectangular/circular) with and including 10 mm dia TMT bars and placed over manholes at site complete all as specified and as directed.

M&L in replacement 100 mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

M&L in replacement 75 mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

M&L in replacement 125/100 mm Salt-glazed stoneware gully traps, square or round mouthed, 'P' type complete all as specified and as directed.

M&L in repair for 1.20 mtr corner guard of any colour including fixing in walls of tiles/concrete/brickwork etc with adhesive or fixed with screw/ plugs complete all as specified and as directed.

Dismantling wall/Ceiling boards (POP false ceiling and GI wire netting including all GI mongery complete all as specified and as directed.

Dismantling of GI frame including accessories any size complete all as specified and as directed.

S&F GRG (Glass fibre reinforced Gypsum) semi perforated 12 mm thick tiles of size 595 x 595 MM of approved texture, design (Tegular) and patterns having moisture content white colour less than 2% humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 Sub Head : 26.0 New Technologies and materials reflectance of 85%(Min) to be laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross Tof size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm ) i e 50mm long, 8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x2 mm. Galvanised iron perimeter wall angle of size 24 x 24 x0.40mm thick of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as per drawings, as specified and as directed.

M&L in replacement 12mm thick toughened glass door embossed with required letters of Departments/offices/ wards etc including 2X300MM SS fancy type door handle with locking arrangement and hinging arrangement complete all as specified and as directed.

S&F in repair PVC box type cupboards of 18 mm thick single side prelaminated board 600+ density plain colour celluka board inclusive of solvent compound fixing at site as power specification and as directed.

S&F continuous piano hinges 30mm with of flap of MS galvanised complete all as specifed and as directed.

S&F in repair 40mm dia of aluminium anodised cupboard knob fixed with nut, screw etc complete all as specifed and as directed.

S&F in repair magnetic catcher fixed with screws on cupboard shutter etc complete all as specifed and as directed.

Dismantling water storage tanks of following capacity and removing to store and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes.

(a) Capacity exc 250 & not exc 500 ltrs.

(b) Capacity exc 500 & not exc 1000 ltrs.

S&F in repair 20mm bore brass Ball valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair 25mm bore brass Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Disconnecting of existing tanks exc 250ltr & not exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaningetc and hoisting if required reconnecting and re fixing in position complete all as specified and as directed.

Disconnecting of existing tanks exc 500ltr & not exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaningetc and hoisting if required reconnecting and re fixing in position complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc capacity of water tank exc 250ltrs and not exc 500 ltrs incl writing date of cleaning complete all as specified and as directed.

All as per Item No 143 here-in-before but capacity of water tank exc 500 & not exc 1000 Ltrs incl writing date of cleaning complete all as specified and as directed..

S&F Wooden wall lining consisting of 5mm thick of any colour wooden sheet inclusive of solvent cement Compound and fixing at site on 5mm thick wooden frame fillet of width 35mm for wall panelling inclusive of fixing on to the wall including dismantling the existing panelling complete as per specifications and as directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including dismantling/ taking down of existing gate etc, complete all as specified and as directed.

M&L for framed work such as grills, guard bars etc. for pressed steel windows with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars on wall; and similar work conforming to Fe.290 including dismantling of old/ existing MS work/ wrought iron Gde-E-165 complete all as specified and as directed.

M&L Plain cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in coping, bed blocks bed plates, window cills, steps, bands, plinth courses, precast lintel upto 1.5 clear span etc complete all as specified and as directed.

S&F of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soff it at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length ) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting lips across the intermediate channel at 457 mm centre to centre.

M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed.

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface including sunk or raised moulding over metal frame work and reinforced with G.I. wire mesh complete all as specified and as directed (Fillets, metal frame work and G.I. wire mesh paid separately under respective item of this Sch).

MAA SANTOSHI ENTERPRISES

M/s Durga Traders

Vishal Traders

M/S GEETANJALI ENTERPRISES

sony engineering works

friends associeates

R C Sharma and Co